Braking assistance systems are already contributing to improving motorcyclists' safety, however, research on emergency systems acting on the steering is lacking. These systems, already available for passenger cars, could prevent or mitigate motorcycle crashes in which safety functions based only on braking are ineffective. The first research question was to quantify the safety impact of diverse emergency assistance systems acting on the steering of a motorcycle. For the most promising system, the second research question was to assess the feasibility of its intervention using a real motorcycle. Three emergency steering assistance systems were defined in terms of Functionality, Purpose, and Applicability: Motorcycle Curve Assist (MCA), Motorcycle Stabilisation (MS), and Motorcycle Autonomous Emergency Steering (MAES). Experts evaluated each system's applicability and effectiveness based on the specific crash configuration (using Definitions for Classifying Accidents - DCA), the Knowledge-Based system of Motorcycle Safety (KBMS), and the In-Depth Crash Reconstruction (IDCR). An experimental campaign was conducted with an instrumented motorcycle to assess the rider's reaction to external steering input. A surrogate method for an active steering assistance system imparted external steering torques in correspondence with a lane change to analyse the effect of the steering inputs on motorcycle dynamics and rider controllability. MAES globally got the best score for each assessment method. MS received better evaluations than MCA in two out of three methods. The union of the three systems covered a sizeable fraction of the crashes considered (maximum score in 22.8% of the cases). An estimation of the injury potential mitigation, based on injury risk functions for motorcyclists, was made for the most promising system (MAES). The field test data and video footage showed no instability or loss of control, despite the high intensity (>20Nm) of the external steering input. The rider interviews confirmed that the external action was intense but manageable. For the first time, this study presents an exploratory assessment of the applicability, benefits, and feasibility of motorcycle safety functions acting on the steering. MAES, in particular, was found applicable to a relevant share of crashes involving motorcycles. Remarkably, applying an external action to produce a lateral avoidance manoeuvre proved feasible in a real-world test setting.
19 November 2025 in Transportation Research Part D: Transport and Environment
Finding an architectural solution that satisfies electric motorcycles’ performance and riding range is challenging due to the electric powertrain constraints, such as low battery energy density. This paper analyzes the gearbox and powertrain efficiency for battery electric motorcycles (BEMs) based on the drivetrain architecture and under various vehicle use scenarios. The impact on the consumption of a constant-speed gearbox is investigated, focusing mainly on load-independent losses. The analysis is performed using an analytic approach and experimental data. Two different gearbox and powertrain solutions are characterized through test bench experiments, running them under free-driving conditions and no-load tests. A comparison of these powertrain solutions in terms of consumption for the same motorcycle model under different speed profiles (WMTC, LA-4) is conducted. The results show the energy losses and provide information for defining drivetrain components and architectures.
In this paper, we propose an optimization framework for the powertrain design of a two-wheel-driven electric superbike, minimizing energy consumption. Specifically, we jointly optimize the force distribution between the wheels with the gear ratio, and rear motor and battery sizing while explicitly considering vehicle dynamics and performance constraints. First, we present an energy consumption model of the vehicle, including a scalable model of the electric machine based on data from the industry, accounting for iron, copper, and mechanical losses. Then, we analyze the propulsive blending strategy to distribute the required power to the wheels while considering adherence limits. Finally, we demonstrate the effectiveness of our approach by analyzing the design of a superbike, based on regulatory driving cycles and a custom high-performance circuit by comparing the force distribution approaches. The results underline the significance of joint optimization of powertrain components and propulsive bias, achieving a reduction of up to 22.36% in energy consumption for the Sport high-performance driving cycle.
In recent years, electric cargo (e-cargo) bikes have been increasingly adopted as a sustainable alternative for urban logistics and last-mile delivery, particularly in densely populated areas where traditional vehicles face traffic congestion and access limitations. This study aims to develop a representative driving cycle for e-cargo bikes based on real-world cycling data. An instrumented Long John-type e-cargo bike was used to collect naturalistic data from four different riders covering a total of 50 km along a predefined route in the city center of Florence, selected in collaboration with the Italian postal service provider (i.e., Poste Italiane) to reflect typical delivery operations. The driving cycle was generated using a Markov chain Monte Carlo (MCMC) method, modeling the stochastic transitions of vehicle speed and acceleration values. The resulting driving cycle, defined as the Florence cargo bike driving cycle (FCBDC), achieved an error of 2.1% on the Speed Acceleration Probability Distribution (SAPD) root sum square difference; although minor losses in peak acceleration values were observed due to data smoothing and discretization, the synthesized driving cycle effectively reproduces the dynamic characteristics of e-cargo bike riding. While the study is limited to a single route and is equivalent to simulated postman behavior, it provides valuable insights to guide the future development and optimization of e-cargo bikes for sustainable mobility operations.