This article describes the quantitative analysis of the 3D orientation of objects (i.e. particles and voids) within pottery fabrics to differentiate two categories of pottery hand-building primary forming techniques, specifically percussion-building and coil-building, comparing the use of two independent non-destructive imaging modalities, X-ray microtomography (µ-CT) and neutron tomography (NT). For this purpose, series of experimental organic-tempered vessels and coil sections were analysed. For both imaging modalities, two separate systems were employed for quantitatively describing both the orientation of individual objects, as well as the collective preferential alignment of objects within samples, utilising respectively polar and azimuth angles within a spherical coordinate system, and projected sizes within a positive Cartesian coordinate system. While the former provided full descriptions of the orientations of objects within 3D space, the latter, through a ratio dubbed here the ‘Orientation Index’ (OI), gave a simple numerical value with which the investigated samples were differentiated according to forming technique. Both imaging modalities were able to differentiate between coil-built and percussion-built vessels with a high degree of confidence, with the strength of these findings additionally demonstrated through extensive statistical modelling using Monte Carlo simulations. Despite differences in resolution and differences in the attenuation of X-rays and neutrons, µ-CT and NT were shown to provide comparable results. The findings presented here broadly agree with earlier studies; however, the quantitative and three-dimensional nature of the results enables more subtle features to be identified, while additionally, in principle, the non-destructive nature of both imaging techniques facilitates such structural analysis without recourse to invasive sampling.
28 March 2018 in Archaeological and Anthropological Sciences
Turquoise covered mosaic objects - especially masks - were attractive components of treasures transported to Europe from Mexico after the fall of the Aztec Empire in the 1500s. According to our present knowledge, the mosaic masks were manufactured for ritual purpose. The main material of mosaics, the turquoise was a high-prestige semi-precious stone among Mexican native people. During the 20th century, such objects derived both from illegal treasure hunting and documented archaeological excavations. The aim of our research was the authentication of a turquoise covered Aztec wooden mask, which presumably originates from the Tehuacán Valley, Mexico and exchanged by the Museum of Ethnography, Budapest, in 1973. The detailed and complex analytical investigation of the mask is a curiosity. To reveal the origin of the object, UV photographs were taken, the wooden base was subjected to biological studies and C-14 dating, the organic glue fixing the tesserae and the inorganic mosaic tesserae were investigated by non-destructive chemical, FT-IR and Raman spectroscopic methods. Our investigations determined that the mask of the Museum of Ethnography was made of an alder species of tree and its age is AD 1492-1653. The light-coloured covering mosaic lamellae were identified as alabaster and claystone. Comparing the turquoise tesserae cover with reference materials, their chemical composition has been clearly differentiated from most of the well-known turquoise sources of the US Southwest. Based on our results, the Aztec mask of the Museum of Ethnography proved to be an original piece of art from the 15th-17th century.
1 June 2021 in Bulletin of Engineering Geology and the Environment
This paper evaluates the applicability of Hungarian oligomictic alluvial gravel formations at two sections of the Danube river for construction use. The classification of these aggregates is more challenging than monomictic rock aggregates due to their heterogeneous nature. Multi-source clastic sediments cannot be characterized by single values of physical properties but only a distribution, and they are generally less predictable than monomictic materials. The possible applications in concrete manufacturing were evaluated by complex macro-microscopic petrographic, heavy mineral and nuclear analytical geochemical investigations. The two regions falling on the middle course of the Danube have similar sandy gravel formations, applicable as aggregates for conventional and unconventional concrete building purposes or road construction. Their utilization in open-air constructions might be problematic due to their probable alkali-silica reactivity.