Audrius Jutas

Audrius Jutas

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 June 2021 in Metals
Verified
Journal Article
Open access
PDF file
Regita BendikieneRegita Bendikiene
Regita Bendikiene
Antanas CiuplysAntanas Ciuplys
Antanas Ciuplys
Ramūnas ČesnavičiusRamūnas Česnavičius
Ramūnas Česnavičius
AJAudrius Jutas
Audrius Jutas
ABAlexander Bogdanovich
Alexander Bogdanovich
SSSergei S. Sherbakov
Sergei S. Sherbakov
The influence of the austempering temperatures on the microstructure and mechanical properties of austempered ductile cast iron (ADI) was investigated. ADI is nodular graphite cast iron, which owing to higher strength and elongation, exceeds mechanical properties of conventional spheroidal graphite cast iron. Such a combination of properties is achieved by the heat treatment through austenitization, followed by austempering at different temperatures. The austenitization conditions were the same for all the samples: temperature 890 °C, duration 30 min, and quenching in a salt bath. The main focus of this research was on the influence of the austempering temperatures (270 °C, 300 °C, and 330 °C) on the microstructure evolution, elongation, toughness, and fatigue resistance of ADI modified by certain amounts of Ni, Cu, and Mo. The Vickers and Rockwell hardness decreased from 535.7 to 405.3 HV/1 (55.7 to 44.5 HRC) as the austempering temperature increased. Optical images showed the formation of graphite nodules and a matrix composed of ausferrite; the presence of these phases was confirmed by an XRD diffraction pattern. A fracture surface analysis revealed several types of the mechanisms: cleavage ductile, transgranular, and ductile dimple fracture. The stress-controlled mechanical fatigue experiments revealed that a 330 °C austempering temperature ensures the highest fatigue life of ADI.

5 May 2021 in Preprints.org
Verified
Preprint
Open access
PDF file
Regita BendikieneRegita Bendikiene
Regita Bendikiene
Antanas CiuplysAntanas Ciuplys
Antanas Ciuplys
Ramūnas ČesnavičiusRamūnas Česnavičius
Ramūnas Česnavičius
AJAudrius Jutas
Audrius Jutas
ABAlexander Bogdanovich
Alexander Bogdanovich
SSSergei S. Sherbakov
Sergei S. Sherbakov
The influence of the austempering temperatures on the microstructure and mechanical properties of austempered ductile cast iron (ADI) was investigated. ADI is nodular graphite cast iron, which owing to higher strength and elongation exceeds mechanical properties of conventional spheroidal graphite cast iron. Such a combination of properties is achieved by the heat treatment through austenitization, followed by austempering at different temperatures. The austenitization conditions were the same for all the samples: temperature 890°C, duration 30min, and quenching in a salt bath. The main focus of this research was on the influence of the austempering temperatures (270°C, 300°C, and 330 C) on the microstructure evolution, elongation, toughness and fatigue resistance of ADI modified by certain amount of Ni, Cu, and Mo. The Vickers and Rockwell hardness decreased from 535.7 to 405.3HV/1 (55.7 to 44.5HRC) as the austempering temperature increased. Optical images showed the formation of graphite nodules and matrix composed of ausferrite; the presence of these phases was confirmed by an XRD diffraction pattern. A fracture surface analysis revealed several types of the mechanisms: cleavage ductile, transgranular and ductile dimple fracture. The stress-controlled mechanical fatigue experiments revealed that a 330°C austempering temperature ensures the highest fatigue life of ADI.

21 January 2023 in Materials
Verified
Journal Article
Open access
PDF file
Regita BendikieneRegita Bendikiene
Regita Bendikiene
AJAudrius Jutas
Audrius Jutas
PNPaulius Nagys
Paulius Nagys
AŠAušra Šipailienė
Aušra Šipailienė
This paper aimed to analyse the mechanical and sanitary properties of artificial cast stone. To create an artificial stone product of the desired shape and design, a thermoforming process is used, during which heavy presses shape the artificial stone parts at a certain temperature. According to experimental studies, the most suitable temperature for monochromatic and patterned cast stone thermoforming is 160 °C when the material has the least bending resistance and does not react strongly to heat. It is observed that the cast stone bends more easily as the distance increases. The bending test of the glued samples made it possible to find out which of the three gluing methods is the most resistant to the forces acting on the samples during bending. The sanitary properties of the artificial stone were compared with the properties of other commonly used surfaces. In the microbiological study, suspensions of three different bacteria were spread on stainless steel, laminated particleboard and artificial cast stone, and washes were taken from 100 cm2 after 25 min. The results showed that the artificial stone after washing had the lowest number of colonies forming units per cm2, which supports the claim of excellent sanitary properties of the product.

1 January 2020
Verified
Conference Paper
Closed access
Regita BendikieneRegita Bendikiene
Regita Bendikiene
Antanas CiuplysAntanas Ciuplys
Antanas Ciuplys
Ramūnas ČesnavičiusRamūnas Česnavičius
Ramūnas Česnavičius
VGVytautas Grigas
Vytautas Grigas
AJAudrius Jutas
Audrius Jutas
SSSergei S. Sherbakov
Sergei S. Sherbakov

11 June 2025 in The International Journal of Advanced Manufacturing Technology
Verified
Journal Article
Closed access
PDF file
Regita BendikieneRegita Bendikiene
Regita Bendikiene
AJAudrius Jutas
Audrius Jutas
Antanas CiuplysAntanas Ciuplys
Antanas Ciuplys