Ramūnas Česnavičius

Dr. Ramūnas Česnavičius

Kaunas University of Technology, Kaunas, Kauno Miestas, Lithuania
orcid

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 June 2021 in Metals
Verified
Journal Article
Open access
PDF file
Regita BendikieneRegita Bendikiene
Regita Bendikiene
Antanas CiuplysAntanas Ciuplys
Antanas Ciuplys
Ramūnas ČesnavičiusRamūnas Česnavičius
Ramūnas Česnavičius
AJAudrius Jutas
Audrius Jutas
ABAlexander Bogdanovich
Alexander Bogdanovich
SSSergei S. Sherbakov
Sergei S. Sherbakov
The influence of the austempering temperatures on the microstructure and mechanical properties of austempered ductile cast iron (ADI) was investigated. ADI is nodular graphite cast iron, which owing to higher strength and elongation, exceeds mechanical properties of conventional spheroidal graphite cast iron. Such a combination of properties is achieved by the heat treatment through austenitization, followed by austempering at different temperatures. The austenitization conditions were the same for all the samples: temperature 890 °C, duration 30 min, and quenching in a salt bath. The main focus of this research was on the influence of the austempering temperatures (270 °C, 300 °C, and 330 °C) on the microstructure evolution, elongation, toughness, and fatigue resistance of ADI modified by certain amounts of Ni, Cu, and Mo. The Vickers and Rockwell hardness decreased from 535.7 to 405.3 HV/1 (55.7 to 44.5 HRC) as the austempering temperature increased. Optical images showed the formation of graphite nodules and a matrix composed of ausferrite; the presence of these phases was confirmed by an XRD diffraction pattern. A fracture surface analysis revealed several types of the mechanisms: cleavage ductile, transgranular, and ductile dimple fracture. The stress-controlled mechanical fatigue experiments revealed that a 330 °C austempering temperature ensures the highest fatigue life of ADI.

1 September 2018 in Surface and Coatings Technology
Verified
Journal Article
Closed access
Liutauras MarcinauskasLiutauras Marcinauskas
Liutauras Marcinauskas
JMJacob Shiby Mathew
Jacob Shiby Mathew
MMMindaugas Milieška
Mindaugas Milieška
BTBalakumaran Thanigachalam
Balakumaran Thanigachalam
AKAlja Kupec
Alja Kupec
MKMitjan Kalin
Mitjan Kalin

18 August 2020 in The International Journal of Advanced Manufacturing Technology
Verified
Journal Article
Closed access
PDF file
VOVytautas Ostasevicius
Vytautas Ostasevicius
PKPaulius Karpavicius
Paulius Karpavicius
VJVytautas Jurenas
Vytautas Jurenas
MČMindaugas Čepėnas
Mindaugas Čepėnas
Ramūnas ČesnavičiusRamūnas Česnavičius
Ramūnas Česnavičius
Darius EidukynasDarius Eidukynas
Darius Eidukynas

9 June 2016 in The International Journal of Advanced Manufacturing Technology
Verified
Journal Article
Open access
PDF file
VOVytautas Ostasevicius
Vytautas Ostasevicius
VJV. Jurenas
V. Jurenas
VAV. Augutis
V. Augutis
RGR. Gaidys
R. Gaidys
Ramūnas ČesnavičiusRamūnas Česnavičius
Ramūnas Česnavičius
RDR. Dundulis
R. Dundulis
An effective system for monitoring the wear of the machine tool inserts could significantly contribute to saving costs in manufacturing. One of the most recent and popular of effective monitoring methods revolves around the use of sensing technologies for indirect estimation of tool wear. The sensory information is difficult to collect from machine tools due to the extremely poor signal-to-noise ratio of the relevant tool wear-related information because the milling operation is of interrupted nature since the work piece is in contact with the tool edge several times per second. Another issue is the varying thickness of the chip during the penetration of the work piece. Yet, many challenges still impede the practical application of this method for industrial environment. Therefore, the paper presents a method that could solve these challenges especially in industrial environment. The proposed self-powered wireless sensor node is integrated in the structure of the cutting tool. The voltage generated from the cutting tool vibrations of the harvester exponentially rises when the capacitor is fully charged and wireless signal sent to the receiver. As the intensity of energy accumulation depends on the state of the cutting tool wear, it indicates and detects the tool condition. The proposed technique could be useful for the identification of the cutting tool quality and the relative tool-work piece position. The information about the variation of tool wear is beneficial for helping the manufacturers to control the cutting process, to minimize the product cost as well as to improve the machining quality and efficiency.

5 May 2021 in Preprints.org
Verified
Preprint
Open access
PDF file
Regita BendikieneRegita Bendikiene
Regita Bendikiene
Antanas CiuplysAntanas Ciuplys
Antanas Ciuplys
Ramūnas ČesnavičiusRamūnas Česnavičius
Ramūnas Česnavičius
AJAudrius Jutas
Audrius Jutas
ABAlexander Bogdanovich
Alexander Bogdanovich
SSSergei S. Sherbakov
Sergei S. Sherbakov
The influence of the austempering temperatures on the microstructure and mechanical properties of austempered ductile cast iron (ADI) was investigated. ADI is nodular graphite cast iron, which owing to higher strength and elongation exceeds mechanical properties of conventional spheroidal graphite cast iron. Such a combination of properties is achieved by the heat treatment through austenitization, followed by austempering at different temperatures. The austenitization conditions were the same for all the samples: temperature 890°C, duration 30min, and quenching in a salt bath. The main focus of this research was on the influence of the austempering temperatures (270°C, 300°C, and 330 C) on the microstructure evolution, elongation, toughness and fatigue resistance of ADI modified by certain amount of Ni, Cu, and Mo. The Vickers and Rockwell hardness decreased from 535.7 to 405.3HV/1 (55.7 to 44.5HRC) as the austempering temperature increased. Optical images showed the formation of graphite nodules and matrix composed of ausferrite; the presence of these phases was confirmed by an XRD diffraction pattern. A fracture surface analysis revealed several types of the mechanisms: cleavage ductile, transgranular and ductile dimple fracture. The stress-controlled mechanical fatigue experiments revealed that a 330°C austempering temperature ensures the highest fatigue life of ADI.

1 February 2021 in International Journal of Pressure Vessels and Piping
Verified
Journal Article
Closed access
LRLaurencas Raslavičius
Laurencas Raslavičius
ŽBŽilvinas Bazaras
Žilvinas Bazaras
VLVaidas Lukoševičius
Vaidas Lukoševičius
AVAndrius Vilkauskas
Andrius Vilkauskas
Ramūnas ČesnavičiusRamūnas Česnavičius
Ramūnas Česnavičius