Objectives. Exposure to hand-transmitted shocks is a widespread phenomenon in the workplace. Separate risk assessments for shocks do not exist in current international hand–arm vibration regulations, leading to potential underestimation of associated health risks. Methods. In a pilot study approach, eight healthy males were exposed to sets of 3 × 5 min of repetitive shocks and 1 × 5 min of random vibration, controlled at a weighted vibration total value of 10 m/s2. Baseline and post-exposure measurements of vibration perception thresholds, finger skin temperature, maximal grip/pinch force and the Purdue pegboard test were conducted. Muscle activity was monitored continuously by surface electromyography. Results. Shock exposures evoked a temporary increase of vibration perception thresholds with high examination frequencies. A decrease of skin temperature was hinted for shocks of 1 and 20 s–1. Electromyographical findings indicated an additional load on two forearm muscles during shock transmission. Maximum grip force and manual dexterity were not affected, and pinch force only partially reduced after the exposures. Conclusion. Physiological effects from shock exposure conform to those described for hand–arm vibration exposure in principle, although some divergence can be hypothesized. Randomized designs are required to conclusively assess the need of occupational health concepts specifically for hand-transmitted shocks.
Standardized exposure assessments were conducted to quantify the historical occupational exposure to hand-arm vibration of workers in the German construction, underground coal mining, woodworking, and metalworking industries. A two-step approach was used to assess historical vibration exposure. In the first step, individual work histories were reconstructed by standardized personal interviews. The interview focused on the identification of relevant power tools used throughout the working life. In the second step, an equipment-exposure-matrix was constructed by industrial hygiene measurements. By linking the power tools in the work history to the equipment-exposure-matrix, individual daily, and long-term vibration exposures can be quantified. A total of 423 power tools were identified for 5,115 exposure segments over a period of 50 years. 97.2% of the vibration values were based on industrial hygiene measurements. The total vibration value (ahv) of the power tools used varied between 0.8 m/s2 and 65.2 m/s2 with a median value of 14.2 m/s2. The median value of cumulative vibration exposure is Dhv = 121,971 (range: 23-3,374,640) m2/s4·day, corresponding to a daily vibration exposure of ahv(8) = 7 m/s2 for 2489 working days (11.3 years). This study provides a detailed description of hand-arm vibration exposure among workers in the related industries studied. Our analyses indicate that the quantification of daily vibration exposure is often uncertain and should be interpreted with caution. In contrast, cumulative vibration exposure is a more reliable exposure parameter for describing general working conditions and for guiding the prevention and compensation of vibration-related health problems.
To quantify the effect of frequency-range-specific hand–arm vibration (FRS-HAV) exposure on the risk of musculoskeletal disorders of the upper limb (UMSDs), we performed an analysis among the study sample of the German Hand–Arm Vibration Study. In total, 206 cases and 609 controls were included in this analysis. Cases were new patients with UMSDs. Controls were a random sample of people with compensable occupational injuries. Standardized personal interviews were performed among cases and controls. In addition to leisure activities and comorbidities, detailed work histories were obtained from all participants. To quantify FRS-HAV exposures, a database of vibration measurements of over 700 power tools was used. This database allows detailed quantification of vibration exposure over long periods of time. A dose–response relationship between FRS-HAV exposure and UMSDs was quantified using conditional logistic regression analyses. After adjustment for relevant confounders, consistent and statistically significant exposure–response relationships were observed between cumulative vibration exposure and UMSDs. The effect of vibration exposure on the risk of UMSDs is mainly concentrated in the frequency range ≤ 50 Hz. This suggests that the current ISO frequency-weighting curve for quantifying hand–arm vibration exposure is reasonable and can be used for vibration-related risk assessment, especially for musculoskeletal disorders.
Physiological health effects (vibration perception thresholds and infrared skin temperature) of single-impact exposures and vibration exposures have been evaluated. In this experiment, a total of 52 healthy male participants were randomly exposed to single shocks of different frequencies (1 s−1, 4 s−1, and 20 s−1) and to random signal vibration exposures (4 × 5 min exposure duration). We observed frequency-dependent and eventually dose-dependent physiological effects. No exposure parameter systematically correlated to any of the examined physiological outcomes. This could hint at different pathways for physiological effects.
Background: Single-shock exposure to the hand–arm system is a distinct form of occupational mechanical exposure that is rarely assessed separately from continuous vibration. Due to methodological challenges and the lack of standardized definitions, epidemiological evidence on its prevalence and health relevance remains limited. Objectives: This study aimed to explore the occurrence of occupational single-shock exposure in a general working population and to examine its association with self-reported hand–arm health problems. A secondary objective was to assess the usefulness of an exploratory ISCO-08-based job–exposure matrix (JEM). Methods: A cross-sectional survey was conducted among workers from diverse occupational backgrounds. Participants reported the use of predefined hand-held tools emitting single shocks, as well as additional tools identified via free text. Job titles were coded according to ISCO-08 and combined with expert-based exposure assessments to develop an exploratory JEM. Associations between exposure and health outcomes were analyzed descriptively and analytically in three exposure regression models. Results: Overall, 35% of participants (N = 162) reported occupational exposure to single shocks across a wide range of occupations, including technical and mixed-task jobs, indicating broader exposure than expected from ISCO-based classifications. Although exposure was generally of low to moderate intensity, it was associated with reported hand–arm health problems, particularly in distal regions (fingers, hand, and wrist (FHW); OR 4.32, 95% CI 1.38–13.44), where high forces seemed to be the main risk aspect (OR 6.26, 95% CI 1.67–23.50). Conclusions: Single-shock exposure appears to be common and may be associated with adverse hand–arm outcomes even at relatively low levels. The exploratory JEM was useful for identifying underestimated occupations and heterogeneity but cannot replace detailed task- or measurement-based assessment. Improved exposure definitions, assessment methods, and longitudinal studies in larger cohorts are needed to clarify health risks.
Vorwort Sehr geehrte Damen und Herren, ob am Arbeitsplatz, im alltäglichen Verkehr oder in der Freizeit, mechanische Schwingungen wirken stetig auf den menschlichen Körper ein. Die Auswirkungen reichen von Komfort- und Leistungseinbußen bis hin zu gesundheitlichen Beeinträchtigungen. Neben einer fachspezifischen Betrachtung ist der interdisziplinäre Austausch ein wichtiger Bestandteil, um neue Erkenntnisse und darauf aufbauende Verbesserungen zu erreichen. Die nun zum 9. Mal stattfindende „VDI-Tagung Humanschwingungen“ bietet eine gute Plattform für die Diskussion zwischen den einzelnen Fachrichtungen aus Industrie, Behörden und Wissenschaft. Dabei ist ein wichtiger Aspekt die Bewertung von Schwingungen bzw. Vibrationen mittels experimenteller und numerischer Verfahren. Dadurch lassen sich die Folgen auf den kompletten Körper und/oder den Hand-Arm-Apparat ermitteln und Lösungen zur Reduktion ableiten. Der Gesetzgeber hat außerdem diverse Richtlinien zum Arbeitsschutz definiert. Diese sollen den Arbeitgeber unterstützen, die Folgen durch mechanische Schwingungen für Mitarbeiter einzuschätzen und möglichst gering zu halten. Die Tagung bietet hier die Möglichkeit neue Vor...