Embedding strong photonic stopbands into traditional optical fibre that can directly access and sense the outside environment is challenging, relying on tedious nano-processing steps that result in fragile thinned fibre. Ultrashort-pulsed laser filaments have recently provided a non-contact means of opening high-aspect ratio nano-holes inside of bulk transparent glasses. This method has been extended here to optical fibre, resulting in high density arrays of laser filamented holes penetrating transversely through the silica cladding and guiding core to provide high refractive index contrast Bragg gratings in the telecommunication band. The point‐by‐point fabrication was combined with post-chemical etching to engineer strong photonic stopbands directly inside of the compact and flexible fibre. Fibre Bragg gratings with sharply resolved π-shifts are presented for high resolution refractive index sensing from $${n}_{{{{{{\rm{H}}}}}}}$$ = 1 to 1.67 as the nano-holes were readily wetted and filled with various solvents and oils through an intact fibre cladding.
Femtosecond laser irradiation is applied to a single‐mode optical fiber to embed a filament array through the silica cladding and guiding core and form chirped Bragg gratings. Unlike a planar‐shaped refractive index modification, the long and uniform filament facilitates efficient optical scattering into azimuthally narrowed radiation modes, external and transverse to the fiber cladding. Chirping of the grating period further provides spectral focusing. The combined spectral and azimuthal focusing permits lens‐less recording of bright and high‐resolution spectra spanning across most of the visible band with a low‐cost charged coupled device camera. The flexible point‐by‐point writing enables fiber tapping of light with engineered spectral and geometric focusing properties, permitting the design of new compact photonic devices based on the all‐fiber spectrometer.
Fiber Bragg gratings (FBGs) are useful components in fiber optic sensing systems, which can be highly multiplexed and distributed. In recent years, fabrication using ultrafast lasers has made these devices much more versatile and robust, but questions concerning their high-temperature performance remain. The wavelength resonance of an FBG is naturally sensitive to various parameters of its environment; in particular, changes in the temperature or strain of a fiber tend to induce observable shifts in the Bragg wavelength. Thus, FBGs can offer reliable sensing solutions, provided they are isolated from other influences and their wavelength responses remain well characterized. Nonetheless, it is important to be aware that the isothermal wavelength drift of unstrained FBGs has been previously observed. When this occurs, it can lead to measurement errors and a requirement for sensor recalibration. This study presents a comparison of long-term isothermal wavelength drifts observed at 600 °C, 800 °C, 900 °C and 1000 °C for large numbers of Type II FBGs in different kinds of single-mode fibers. The results provide guidance for the design of high-temperature sensing systems, both in terms of fiber selection and for estimating the maximum time before recalibration becomes necessary to maintain a specified accuracy.
Filament arrays were inscribed off-axis in the core of standard single-mode telecommunication fiber, using femtosecond laser pulses. The flexible line-by-line writing formed uniform, parallel filaments, permitting Bragg grating sensing of the photoelastic response from inside of the narrow grating plane. Active monitoring of the Bragg resonance wavelength while driving a lateral fiber tip displacement directly informed on the fiber mechanics when coupled with opto-mechanical modelling. Overlaying of parallel and orthogonal gratings further provided a strongly contrasting azimuthal sensitivity, which paves the way for multi-dimensional displacement sensing with improved precision.
All-fiber visible spectrometers with a sub-nanometer resolution and record-high light outcoupling (70%) are fabricated using violet (400 nm) and near-infrared (800 nm) femtosecond laser pulses and the phase mask technique. The spectrometers are based on highly localized uniform Bragg gratings produced by tightly focusing the femtosecond pulses into the core of visible single-mode fibers. The unique nanoscale morphology of the resultant Bragg gratings ensures very strong outcoupling of light from the fiber, while bending of the fiber provides the focusing capability to define an efficient all-fiber spectrometer.