A digital hydraulic valve is an important component of the digital hydraulic system, and its performance is directly related to the system function. In order to make the valve system more competitive in dimension, digital valve miniaturization is an important research point. A new micro digital valve is designed, which is analyzed from the mechanical structure and magnetic circuit mechanism, and the design difficulties are also expounded. The four subsystems and switching characteristics of the valve are theoretically analyzed and simulated. In order to test the performance of the valve, a test system is designed, and performance of the new micro valve is tested. The test results show that the switch characteristic analysis of the valve is correct. The comparison between the test curve and the simulation curve is carried out, which demonstrates that the accuracy of the simulation model is reasonable. The theoretical analysis of the new micro digital valve is consistent with experiments.
1 January 2018 in Advances in Materials Science and Engineering
In order to get the better electromagnetic characteristics of the micro digital valve, the larger electromagnetic force should be obtained in the smaller electromagnetic structure. The electromagnetic force directly determines the electromagnetic properties of the miniature digital valve. The electromagnetic force test is studied in the paper. The results of electromagnetic simulation results are basically consistent with the experimental results. The simulation model is reliable and accurate. The dynamic simulation results show that the dynamic characteristics of the miniature digital valve meet the requirements of the digital hydraulic technology. Design of the new micro digital valve is reasonable.
The miniature high-speed digital valve is essentially a kind of miniature system that contains many nonlinear factors and involves multifield coupling among electromagnetic, mechanical, and liquid ones. In this study, the dimension of an electromagnetic structure is normalized into a unified variable, and the numerical analysis method is used to optimize the values of each parameter size on the premise of satisfying the requirements. The electronic control board is the control signal input equipment of the valve. The input changes of voltage and current directly affect the thermal characteristics of the valve. The electronic control board is the power source of the digital valves, and their high speed partially depends on the characteristics of the electronic control board. In this study, a control board for miniature digital valves was developed, which realizes the rapid rise and fall of current and meets the design requirements. A new electronic control board is manufactured, and a control platform for the electronic control board is built. Experiments demonstrate that there is no delay in the current rise and fall, showing that the valve achieves its dynamic response target. Using the finite element analysis software Workbench to simulate it numerically, the temperature field distribution in the original structure is not uniform, which affects the magnetic properties of the electromagnetic field. To address this disadvantage, this study proposes to insulate the heat source with thermal insulation material, which will not affect the temperature distribution of the entire electromagnetic components. The simulations show that the proposed method is effective and reliable.