6 January 2023 in Transactions of the Institute of Measurement and Control
In this paper, a robust output feedback controller with error constraint is proposed to improve the position tracking performance of the electro-hydraulic servo system. Since only the position signal of the system is available, a high-order sliding mode observer is designed to estimate the unobtainable system states. The new state observer can not only avoid the influence of sensor measurement noise but also reduce the chattering of traditional sliding mode observer. To cope with the modeling error, parameter uncertainty, and external disturbance, a robust controller based on backstepping method is designed. In addition, barrier Lyapunov function is introduced to limit the maximum tracking error to a preset range. Finally, comparative experiments are carried out on the asymmetric hydraulic cylinder test bench. The experimental result shows that the proposed controller has a satisfied tracking performance.
15 May 2023 in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
The straightness control of the working face is the key technology to realize intelligent production of coal mines. However, the discontinuity of on–off hydraulic components of the existing underground working face cannot meet the needs of intelligent straightness control. A new type of dual-spool high water-based digital valve with a motor ball screw as the driving element is proposed as a solution to this problem. In this paper, the force of the valve is firstly analyzed, and it is found that the force of the movement of the valve core can be equivalent to the disturbance of the motor. The control of the valve core is essentially displacement control. In addition, a mathematical model of the valve is established, and sliding mode control with a high-gain observer is proposed to overcome time-varying characteristics of the load. Theoretical analysis indicates that the proposed controller ensures asymptotic stability with existing uncertain disturbances. Moreover, a system based on MATLAB/Simulink simulation model is developed to further verify the performance of the proposed algorithm. Compared with traditional sliding mode control and proportional integral derivative, the proposed algorithm can still improve the tracking accuracy and robustness along with 0.05 mm error under strong time-varying interference. The valve reaches the required flow in around 0.2 s, which is sufficient for the majority of work surface application situations. The research proposes a novel design concept and control approach for straightening coal mine scraper conveyors.
25 August 2025 in Flow Measurement and Instrumentation
25 April 2025 in IEEE Transactions on Instrumentation and Measurement
Accurate control of hydraulic support movement in coal mining remains a significant technical challenge due to the limitations of existing electro-hydraulic directional valves, which are typically on/off valves without proportional control function. To address this issue, a high-pressure, large-flow water hydraulic proportional flow valve piloted by two high speed on/off valves is proposed. The main valve spool employs a symmetrical cylinder type cone structure, featuring a non-full circle U-shaped valve port. The transfer function of the flow valve is derived based on Laplace transformation, and the impact of discrete pulse flow output from the high speed on/off valves on main valve displacement fluctuations is theoretically calculated. The influence of the key structural parameters and control parameters on the main valve dynamic characteristics is also simulated. Finally, a prototype of the flow valve is developed and a semi-physical simulation testing rig using Matlab/xPC Target is constructed. The experiment results demonstrate the flow valve exhibits favorable dynamic and static characteristics, with the step rise time of 0.3 s and the steady-state error of 0.18mm. The amplitude–frequency experiments reveal that the proposed flow valve achieves a frequency response of no less than 2 Hz at 100% full scale. The proposed flow valve is not limited to coal mining applications, and it is suitable for use in high-temperature and high-pressure heavy machinery equipment operating.
10 February 2026 in Measurement
29 March 2026 in Transactions of the Institute of Measurement and Control
Intelligent fully mechanised mining faces impose high requirements on the straightness of scraper conveyors, which are essential for improving automation levels and operational safety in underground coal mines. However, motion control of scraper conveyors employs on/off electrohydraulic directional valves, making precise position control challenging. A novel high-pressure large-flow water hydraulic digital flow valve with a dual-pilot valve is proposed in this study to address the aforementioned issues. The pilot valve consists of double two-position three-way ball valves, which achieve independent control of load ports for the main spool. The main valve adopts a symmetric cylinder-type cone valve structure. First, a third-order integrator-type mathematical model of the flow valve is established through coordinate transformation. An active disturbance rejection control (ADRC) controller and an extended state observer designed to estimate and compensate for system uncertainties and disturbances are built for main spool displacement. The stability of the digital valve’s closed-loop control system is verified through inverse Lyapunov methods and disturbance theory. Second, the effects of ADRC parameters on step response performance are studied via simulation, and optimal control parameters are identified. Finally, a prototype of the flow valve is developed, and a corresponding test bench is constructed. Experimental results demonstrate that with the proposed control strategy, the 8-mm step response of the main spool achieves a delay time of 0.076 s, representing a 19.1% reduction compared with the delay time under the proportional–integral–derivative (PID) control algorithm. Moreover, the rise time is reduced to 0.146 s, showing a 50.5% improvement compared with that under the PID algorithm. The proposed system offers other remarkable practical advantages, including strong anti-disturbance capability and high tracking accuracy, which contribute directly to enhanced equipment reliability and operational safety in mining environments.