As offshore wind turbines develop into deepwater operations, accurately quantifying the impact of stochastic excitation in complex sea environments on offshore wind turbines and conducting structural fatigue reliability analysis has become challenging. In this paper, based on long-term wind–wave reanalysis data from the South China Sea, a novel direct probability integral method (DPIM) is developed for the stochastic response and fatigue reliability analysis of the key components for the floating offshore wind turbine structures, under combined wind–wave excitation. A 5 MW floating offshore wind turbine is considered as the research object, and a comprehensive analysis of the wind turbine system is performed to assess the short-term fatigue damage at the tower base and blade root. The proposed method’s accuracy and efficiency are validated by comparing the results to those obtained from Monte Carlo simulations (MCS) and a subset simulation (SSM). Additionally, a sensitivity analysis is conducted to evaluate the impact of different environmental parameters on fatigue damage, providing valuable insights for the design and operation of FOWTs in varying sea conditions. Furthermore, the results indicate that the fatigue life of floating offshore wind turbine (FOWT) structures under combined wind–wave excitation meets the design requirements. Notably, the fatigue reliability of the wind turbine under aligned wind–wave conditions is lower compared to misaligned wind–wave conditions.
As offshore wind turbines develop into deepwater operations, accurately quantifying the impact of stochastic excitation in complex sea environments on offshore wind turbines and conducting structural fatigue reliability analysis has become challenging. In this paper, based on long-term wind-wave reanalysis data from a site in the South China Sea, a novel direct probability integral method (DPIM) is developed for the stochastic response and fatigue reliability analysis of the key components for the floating offshore wind turbine structures under combined wind-wave excitation. A 5MW floating offshore wind turbine is considered as the research object, and a fully coupled dynamic response analysis of the wind turbine system is conducted to calculate the short-term fatigue damage value of tower base and blade root. The DPIM is applied to calculate the fatigue reliability of the wind turbine structure. The accuracy and efficiency of the proposed method are validated by comparing the obtained results with those of Monte Carlo simulations. Furthermore, the results indicate that the fatigue life of floating offshore wind turbine structures under combined wind-wave excitation meets the design requirements. Notably, the fatigue reliability of the wind turbine under aligned wind-wave conditions is lower compared to misaligned wind-wave conditions.
1 May 2015 in International Journal of Advanced Structural Engineering
In this paper, the boundary element method is applied to carry out the structural analysis of post-tensioned flat slabs. The shear-deformable plate-bending model is employed. The effect of the pre-stressing cables is taken into account via the equivalent load method. The formulation is automated using a computer program, which uses quadratic boundary elements. Verification samples are presented, and finally a practical application is analyzed where results are compared against those obtained from the finite element method. The proposed method is efficient in terms of computer storage and processing time as well as the ease in data input and modifications.
24 October 2016 in International Journal of Advanced Structural Engineering
Magneto-rheological dampers (MR-dampers) are increasingly used in construction applications to reduce the dynamic response of structures to seismic activities or severe wind loading. Sensors attached to the structure will signal the computer to supply the dampers with electric charge that transfers the MR fluid to a near-solid material with different physical and mechanical properties (viscoelastic behavior). Control algorithms govern the fluid to near-solid conversion, which controls the behavior of the damper, and the performance of the structure under the seismic or wind loading event. The successful optimization of control parameters minimize the overall structural response to dynamic forces. The main objective of this research is to change the output behavior of specific floors within a building subjected to seismic excitation by optimizing the MR-dampers control parameters to impact the behavior of a specific floor or number of floors within the building. The adjustment of control parameters to attain this objective was validated in multiple case studies throughout this research. The successful implementation of the research outcome will result in optimized MR-damper design to meet the performance-based criteria of building projects.