Water surface roughness in rivers and streams is mainly driven by flow, turbulence and riverbed conditions. Conversely, water surface roughness gives easy access to information about hydrodynamics – provided that measurements are possible at sufficient spatial-temporal resolution and accuracy. We present a novel small-size (diameter 28 mm) drifter, which detects water surface roughness through acceleration measurements while floating on the water surface. Laboratory tests revealed a good agreement between drifter-based measurements and optical characterization of surface roughness. Only very short waves with periods <0.15 s remained undetected by the drifter. Results from laboratory and field experiments show strong correlations between the drifter-measured water surface roughness, flow and shear velocities, Froude and Reynolds numbers. The small-sized drifter is particularly appropriate for reach-scale measurements in streams, where the application of other devices or methods is too large or laborious.
Background: Modern water management strategies aim to assess the impact of water regulation alternatives on all relevant ecosystem services, including white water (WW) recreation. Therefore it is important to estimate the optimum kayak flow range for river reaches that are potentially relevant for WW kayaking. Methods: We used the grade V run of the Teigdalselva River as an example and compared the results of three different approaches: (i) a hydro-morphological analysis of kayak runs using public data sources; (ii) a citizen science method that is based on photos and videos of kayak-activities on the web; and, (iii) interviews with elite kayakers. Results: For the hydro-morphological analysis, we found that some optimal flow ranges for WW kayak could be estimated based on empirical regional regression as a function of the natural mean flow and the geomorphic run type. The interviewed kayakers suggested a wider range of optimal flows, in particular, higher maxima. The test of the citizen science approach provided flows that ranged in the middle of the estimates made by the two other approaches for prescribing optimum kayak flow ranges. Conclusions: We recommend a combination of different methods for water management studies that are related to flow requirements for white water kayak. Estimations based on the empirical regression functions should be always complemented by at least one other approach.
A 3D numerical model was used to compute the discharge distribution in the channel branches of Lake Øyeren's delta in Norway. The model solved the Navier–Stokes equations with the k–ɛ turbulence model on a 3D unstructured grid. The bathymetry dataset for the modelling had to be combined from different data sources. The results for three different flow situations in 1996 and 1997 showed a relative accuracy of the computed discharges within the range of 0 to±20% compared with field measurements taken by an ADCP at 13 cross sections of the distributary channels. The factors introducing the most error in the computed results are believed to be uncertainties concerning the bathymetry. A comparison between the computational results of the older morphology data from 1985–1990 and the model morphology from 1995–2004 indicated that morphological changes in this period had already had consequences for the flow distribution in some channels. Other important error sources were the inevitable use of averaged water level gradients because of unavailable water level measurements within the delta.
The Authors appreciate the discussion and thank the Discussers for the extended validation of the Lagrangian drifter through a comparison of measured surface roughness with predictions using the an...