Longdi Cheng

Longdi Cheng


Research Focus & Metrics

Academic Career Length

18Years (2009-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 January 2020 in Polymers
Verified
Journal Article
Open access
PDF file
YCYi Cui
Yi Cui
SGShuyi Gao
Shuyi Gao
RZRuiyun Zhang
Ruiyun Zhang
LCLongdi Cheng
Longdi Cheng
JYJianyong Yu
Jianyong Yu
The aim of this paper is to study the hygroscopic behavior of hygroscopic exothermic fiber-based materials and to obtain a better understanding of the thermal performance of these fibers during the moisture absorption process. The temperature distribution of different kinds of hygroscopic exothermic fibers in the process of moisture absorption, observed by infrared camera, demonstrated two types of heating performance of these fibers, which might be related to its hygroscopic behavior. Based on the sorption isotherms, a Guggenheim-Anderson-de Boer (GAB) multi-layer adsorption model was selected as the optimal moisture absorption fitting model to describe the moisture absorption process of these fibers, which illustrated that water sorption capacity and the water–fiber/water–water interaction had a significant influence on its heating performance. The net isosteric heats of sorption decreased with an increase of moisture content, which further explained the main factor affecting the heat dissipation of fibers under different moisture contents. The state of adsorbed water and water vapor interaction on the fiber surface were studied by simultaneous thermal analysis (TGA-DSC) measurement. The percentage of bound and unbound water formation at low and high humidity had a profound effect on the thermal performance of fibers. It can therefore be concluded that the content of tightly bound water a strong water–fiber interaction was the main factor affecting the heating performance of fibers at low moisture content, and the content of loosely bound water reflected that water sorption capacity was the main factor affecting the heating performance of fibers at high moisture content. This was further proven by the heat of desorption.

12 February 2020 in Polymers
Verified
Journal Article
Open access
PDF file
LMLei Min
Lei Min
YLYuling Li
Yuling Li
YLYanping Liu
Yanping Liu
YMYanxue Ma
Yanxue Ma
LCLongdi Cheng
Longdi Cheng
YHYue Hu
Yue Hu
Water transfer through porous textiles consists of two sequential processes: synchronous wicking–evaporating and evaporating alone. In this work we set out to identify the main structural parameters affecting the water transfer process of cotton fabrics. Eight woven fabrics with different floats were produced. The fabrics were evaluated on a specially designed instrument capable of measuring the water loss through a vertical wicking process. Each test took 120 min, and two phases were defined: Phase I for the first 10 min and Phase II for the last 110 min according to wicking behavior transition. Principal components and multivariate statistical methods were utilized to analyze the data collected. The results showed that Phase I dominated the whole wicking–evaporating process, and the moisture transfer speed in this phase varied with fabric structure, whereas the moisture transfer speeds in Phase II were similar and constant regardless of fabric structure. In addition, fabric with more floats has high water transfer speed in Phase I due to its loosened structure with more macropores.

1 May 2012 in Textile Research Journal
Verified
Journal Article
Closed access
WLWenyu Li
Wenyu Li
WXWenliang Xue
Wenliang Xue
LCLongdi Cheng
Longdi Cheng
For the purpose of realizing fast and effective detection of defects of yarn-dyed fabric via computer vision, and in consideration of the inherent characteristics of texture, that is, color and structure, an applicable approach for intelligent defect detection is proposed in this paper. The image of yarn-dyed fabric enhanced by fractional differentials is first converted from RGB true color space to L*a*b* color space, and energy-based feature images are acquired after the Log-Gabor filter filters chromatic and brightness channels. Then the paper defines the relations between energy and the local binary pattern as a new concept called energy-based local binary patterns (ELBPs). Finally defects can be detected, using ELBPs rather than grayscale-based local binary patterns. The proposed method can detect chromatic and structural defects. Experimental results for the defect detection from several collections of yarn-dyed fabrics indicate that a detection success rate of more than 94.09% is achieved for the proposed method, and the speed of test is also fast.

22 August 2013 in The Journal of the Textile Institute
Verified
Journal Article
Closed access
WLWenyu Li
Wenyu Li
LCLongdi Cheng
Longdi Cheng
In this paper, we present a novel defect evaluation method that uses combined features and modified support vector machine (SVM) classifiers to characterize and classify the defects of yarn-dyed fabrics. Yarn-dyed fabric images are preprocessed, and nine parameters are defined in the combined feature extractors. Based on binary and textural energy images for defect regions, yarn-dyed fabric defect features can be described, such as weft length, warp length, weft length to warp length ratio, perimeter, area, roundness, coarseness, contrast, and directionality. These parameters are also used as the inputs of optimized SVM classifiers to obtain overall defect classes in accordance with the Chinese National Standard of Yarn-dyed Pattern Fabrics (GB/T 22851 – 2009). The effectiveness of this evaluation method is tested by 180 selected defect images of yarn-dyed fabrics that have different patterns. The cross-validation tests on the yarn-dyed fabric defect classifications indicate that the defect categories of more than 91% of these diversified samples can be recognized correctly by using the SVM classification scheme. Furthermore, the extracted defect parameters provide useful information for textile and clothing manufacturing to grade yarn-dyed fabrics.

24 June 2009 in Textile Research Journal
Verified
Journal Article
Closed access
ZZZhuanyong Zou
Zhuanyong Zou
JYJianyong Yu
Jianyong Yu
WXWenliang Xue
Wenliang Xue
YZYunde Zhu
Yunde Zhu
JWJianming Wu
Jianming Wu
LCLongdi Cheng
Longdi Cheng
The principle and the process of yarn formation determine fiber migration and twist radial distribution in a yarn. Usually tracer fiber technology is introduced to discuss fiber configuration in the yarn body. There are few studies on fiber spatial configuration based on the principle and the process of yarn formation. In this paper, we discuss fiber spatial trajectory in vortex spun yarn from the viewpoint of the principle and the process of yarn formation. Based on the fiber movement rule, the parameter equations of fiber spatial trajectory in vortex spun yarn were established. The fiber spatial configuration and its influenced factors were analyzed. The research results showed that the fiber spatial configuration in vortex spun yarn consisted of the core fiber and the migration wrapper fiber as well as the regular wrapper fiber. The fiber spatial configuration in vortex spun yarn was affected by the following factors: delivery speed, distance from the front roller nip point to the hollow spindle, mean angular velocity for the open-end trailing fiber, fiber length, and vortex spun yarn diameter.

2 December 2020 in The Journal of the Textile Institute
Verified
Journal Article
Closed access
JQJing Quan
Jing Quan
LCLongdi Cheng
Longdi Cheng
WXWenliang Xue
Wenliang Xue
RZRuiyun Zhang
Ruiyun Zhang
Controlling the acceleration points of floating fibers has a profound influence on yarn properties. To analyze the mechanism of a novel drafting device in ring spinning machine on the fiber movement, this paper comparatively analyzes the acceleration point distributions and corresponding yarn properties between the novel drafting devices and the traditional roller drafting device by means of the simulation and experiments. Both results of simulation and experiments prove that the novel drafting device of A-2 can significantly reduce the dispersion of the acceleration points due to its improved and extended friction filed. Besides, the experimental results show that the novel drafting system of A-2 obtains improved yarn evenness and breaking strength, which achieves the advanced level of Uster statistics. This lays the foundation for the research and the development of the novel drafting systems.