Flexible wearable devices and solar flexible units often use thermally sensitive organic materials as substrates, which are prone to thermal damage during the bonding process in 3D packaging, leading to chip deformation or failure. Multicomponent solders, with well-designed multicomponent metallic elements, exhibit unique low-melting-point characteristics. The application of low-temperature multicomponent solders in electronic packaging can significantly reduce bonding temperatures and minimize thermal damage to chips. This paper reviews the wettability and preparation methods of low-temperature multicomponent solders, and concludes the effect of different metallic elements on the solders. Additionally, this paper discusses the research on interfacial reactions, mechanical properties of low-temperature multicomponent solder joints, providing valuable insights for future research and development in this field.

Advances in carbon capture and storage (CCS) technologies are being increasingly pursued as a means of diminishing the impact of anthropogenic CO₂ emissions. Mineral carbonation (MC) offers a promising approach to CO₂ mitigation by converting CO₂ into stable carbonates using natural minerals like basalt. This study investigates the feasibility of carbonation of Segamat basalt, focusing on the transition from gas-solid to aqueous phase under low reaction conditions. A comprehensive experimental approach evaluated the impact of particle size, temperature, reaction duration, liquid-to-solid ratio, and salinity on the carbonation efficiency of each metal oxide and overall CO₂ uptake. The results indicated that significant carbonation up to 71% for calcium can still be achieved with larger particle sizes, low temperatures, and low mechanical activation in the presence of adequate saline water. This finding implies the feasibility of industrial-scale MC with reduced energy consumption. By utilizing basalt feedstock as a plenteous and reachable natural resource, this research provides valuable insights into optimizing ex-situ MC processes and contributes to sustainable CO₂ sequestration strategies.

Friction stir welding of a low carbon thin steel plate was performed with preheating the base material to increase the joining performance. The rotational speed of the tool was set from 1500 to 2000 rpm with a constant travel speed of 15 mm/min and preheating temperature of 50 to 150 °C. The tensile strength of 340 MPa was achieved for the preheated specimen compared with 310 MPa for the non-preheating specimen at the welding speed of 15 mm/min. Electron microscopic images of the preheated joint revealed a remarkable plasticized material flow and dynamic recrystallization, which resulted in the grain refinement that had increased the joining strength. The weld thinning issue was almost eliminated in the preheated welded specimen. However, by increasing the preheat temperature further, the tensile strength decreases due to the formation of defects from excessive heat. The preheated sample fractured at the base metal, revealing a ductile fracture mode.

In the market, there are many types and shapes of syringes. One of the groupings of syringe types is based on barrel volume. The shape of the product design affects performance and user perception. The aim of this study is to investigate the effect of barrel volume on its performance and user perception. We performed analysis following international organization for standardization 7886 procedures on syringe with 1 mL, 3 mL, 5 mL, and 10 mL volume. In addition, a user perception test was conducted on 29 respondents using a questionnaire with the Likert chart method. This study indicates that the bigger the syringe volume, the larger the dead space and the force to operate the piston are. A larger syringe volume also raises the volume that changes due to the plunger position increase. Meanwhile, the barrel volume does not affect water and water leakage, as we did not observe any leak during the syringe tests in our experiment. In addition, the user perception test shows that the barrel’s length influences the ease of device control during the injection. The volume of the barrel negatively correlated with its effect to the environment. The safety features of all syringes are similar except for the 3 mL syringe, which has a value of 0.1 points difference to other syringes.