Plate heat exchangers (PHEs) have significant potential to improve energy efficiency in the process industries. However, realizing their full potential to achieve such energy savings requires a systematic approach to screen the many options available. Thus, this work presents a generalized novel approach for the optimal design of both gasket and welded plate heat exchangers, with different plate geometries and flow configurations. A new design method coupled with an optimization framework is proposed to obtain the optimal solution with minimum total transfer area by setting up a series of relations between temperatures among each single-pass block with known inlet and outlet temperatures of process streams. An MINLP mathematical model is developed to select the best combination of the flow pass configuration and available commercial plate geometries within practical design constraints. The differences between the design methodology of gasket and welded PHEs are highlighted. Two case studies are used to demonstrate the proposed method for both gasket and welded PHEs. Results show that better design with reduced heat transfer area by 10.71% and design time by 83.3% is obtained compared with previously proposed approaches.
The accurate prediction of hydrocracking product yields is crucial for optimizing resource allocation and improving production efficiency. However, the prediction of product flowrates in hydrocracking units often faces challenges due to insufficient data and weak correlations between input and output variables. This study proposes a hybrid framework combining a Convolutional Neural Network–Long Short-Term Memory (CNN-LSTM) model, mechanism modeling, and Particle Swarm Optimization (PSO) to address these issues. The CNN-LSTM captures spatiotemporal dependencies in operational data, while the mechanism model incorporates domain-specific physical constraints. The hybrid model is structured in both series and parallel configurations, with PSO optimizing key hyperparameters to enhance its predictive performance. The results demonstrate significant improvements in prediction accuracy, with determination coefficients (R2s) reaching 0.896 (kerosene), 0.879 (residue), 0.899 (heavy naphtha), and 0.78 (light naphtha). Shapley Additive Explanations (SHAP) and Mutual Information Coefficient (MIC) analyses highlight the mechanism model’s role in improving feature interpretability. This study underscores the efficacy of integrating kinetics modeling, deep learning, and metaheuristic optimization for complex industrial processes under data constraints, offering a robust approach to enhance hydrocracking yield prediction.
Improving the energy efficiency in heat exchanger networks (HENs) remains a significant industrial problem, specifically in energy-intensive operations. A particular method for such an objective is the modification of HENs at the equipment-use level, where structural changes take place and units within the network are moved, replaced and/or removed. This practice is usually known as retrofit. The objective of a retrofit is to maximize the heat recovery using the minimum modifications possible and minimum retrofit cost. Traditional retrofit techniques would normally consider one type of heat exchanger (based on the original network) with no additional design features (i.e., heat transfer enhancement technologies). The expansion of such alternatives is limited by practical use and availability of theoretical methods. In this context, the inclusion of high-performance heat exchangers such as plate heat exchangers (PHEs) has not been widely explored, even when their design and operational advantages are known. In this work, a new step-by-step automated HENs retrofit approach based on Pinch Analysis is proposed. The approach is possible to identify the best modification, its location within the network, and its cost simultaneously. Moreover, to increase energy savings, this work presents a strategy that seeks to utilize high efficiency heat exchangers such as plate heat exchangers for retrofit. A distinctive feature of this new method is the ability to handle different minimum approach temperatures, given the different types of exchangers, within the optimization of HENs. Three cases are studied using this methodology to quantify the potential benefits of including PHEs in HEN retrofits, via the analysis of the retrofit cost. Results are compared with a baseline consisting in the same network, where only Shell-and-Tube-Heat-Exchangers (STHXs) are used. In addition, the results demonstrate that this methodology is flexible enough to be applied in a wide range of retrofit problems.
25 September 2024 in Reaction Kinetics, Mechanisms and Catalysis