Fine-grained composites with high impact resistance (intentionally armor plates) were prepared from inexpensive raw materials by forced SHS compaction in the Ti-B-N-Cu (I) and Ti-B-N-C-Cu (II) systems ([Cu] = 0–10 wt %). The materials synthesized under optimized conditions were practically pore-free compacts with the following parameters: porosity 0.4–1.2%; hardness 91.5–92.5 and 92.3–93.3 HRA; density 4.3–4,4 and 4.5–4.7 g/cm3, for systems I and II respectively. The materials were found to withstand impacts with an energy of 18000–20000 J (for materials with d = 6.8–6.5 g/cm2).
1 January 2016 in International Journal of Global Warming
Georgia could serve as a unique natural testing ground for the development of green industry using advanced technologies for industrial processing of hazardous waste. The goal of the reported work was to improve on the current methods of reprocessing waste by using a combination of a microwave enhanced method of processing used tyres and plastic residues with the microwave enhanced processing of manganese bearing waste and low-grade ores into manganese oxide concentrate. The manganese concentrate could be processed into high-grade manganese alloys (metallic manganese, low-carbon ferromanganese, and composite manganese alloys). Microwave heating required lower energy and resulted in a two-fold increase in yield.
The development of high-strength cast irons with multiphase metal matrix structures is one of the new areas of modern materials science and mechanical engineering. This is so because of the high dissipative properties of such materials, which, in turn, ensure an improvement in their functional characteristics. It is known that one of the effective methods for obtaining alloys with a heterogeneous structure is a multi-stage heat treatment. Therefore, this study aimed to enhance the corrosion and friction properties of high-strength cast irons by combining different processing methods to create a bainite-martensitic matrix. High-strength cast irons with high ductility micro-alloyed with boron were chosen as the object for research. The experiments studied the effect of various types of multi-stage heat treatment on the structural features, tribological properties, hardness and corrosion resistance. The cast irons were quenched in water or liquid nitrogen after a controlled duration of isothermal exposure at different temperatures. It was established that cooling of isothermally hardened samples in liquid nitrogen makes it possible to effectively engineer the morphology and amount of the formed martensitic phase. It was observed that the high-strength cast irons with 10–15% lower bainite, residual austenite and martensite have the best frictional characteristics. This innovative method allowed the quenching of cast iron directly into liquid nitrogen without violent cracking.
1 January 2015 in International Journal of Self-Propagating High-Temperature Synthesis
Suggested is a process, combination of thermal explosion (TE) with forced compaction (FC) termed TE-FC process, for synthesis of single-phase fine-grained pore-free compacts in the Ti-Al system. The TE-FC technique can be readily recommended for practical implementation.