Charaf Eddine BEN SACI

Prof. Charaf Eddine BEN SACI


Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 August 2020 in Journal of Solar Energy Engineering
Verified
Journal Article
Closed access
PDF file
BABenarfaoui Arfaoui
Benarfaoui Arfaoui
MBMohamed taher Bouzaher
Mohamed taher Bouzaher
BGBelhi Guerira
Belhi Guerira
CSCharaf Eddine BEN SACI
Charaf Eddine BEN SACI
This study investigates the energy extraction mechanism by means of swing arm turbine. The swing arm turbines have a particular motion pattern. The pure translation motion in the conventional flapping turbine changes based on the swing arm rotation. The laminar flow around a NACA0015 is resolved using computational fluid dynamics (CFD) method. The turbine blades are equipped with an oscillating gurney flap for trying to boost the system efficiency. The connected gurney flap oscillates with a given pitching angle. A user-defined function and the sliding dynamic mesh technique available in ansys fluent version 15 are used to adjust both the blade and the flap positions during the turbine flapping cycle. The effects of the swing factor and the flap length on the system performance are provided. It is shown that the suggested strategy of control is able to alter the pressure distribution during both the up stroke and down stroke phases, which changes the blade aerodynamic forces during all the flapping cycle portions and therefore improving the turbine efficiency.

15 October 2019 in Journal of Thermal Science and Engineering Applications
Verified
Journal Article
Closed access
PDF file
MBMohamed Taher Bouzaher
Mohamed Taher Bouzaher
BNBELGHAR Nourredine
BELGHAR Nourredine
CSCharaf Eddine BEN SACI
Charaf Eddine BEN SACI
NBNora Bouchahm
Nora Bouchahm
BGBelhi Guerira
Belhi Guerira
In this work, a computational analysis of a spherical solar hot water storage tank during the discharging process is carried out by using the commercial code ansys-fluent.15. The study investigates a new type of spherical heat storage tank. A hinged baffle is fixed at the tank vertical axis to increase the discharge flow rate without a thermocline layer. The dynamic mesh LAYERING technique is used to update the computational domain during the movement of the hinged baffle. The passive pitching of the submerged baffle is due to the fluid-dynamic loads. This model limits the mixture between hot and cold water regardless of the inlet flow rate. A comparative study between tanks with typical diffusers and the hinged baffle model is considered. The comparison of the computational fluid dynamics results with available experimental data showed a good agreement. Examinations of the temperature contours indicate that for the typical models, the interaction between the incoming cold water and the stored hot water gives rise to a thick thermocline layer where its temperature and thickness are related to the intensity of the mixing process. The suggested model shows high stratification efficiency along the discharging process.

19 April 2025 in Fluids
Verified
Journal Article
Open access
PDF file
ACAbdelbasset CHEBANA
Abdelbasset CHEBANA
GLGhelani Laala
Ghelani Laala
MBMohamed taher Bouzaher
Mohamed taher Bouzaher
CSCharaf Eddine BEN SACI
Charaf Eddine BEN SACI
AZAlaeddine ZEREG
Alaeddine ZEREG
MAMounir AKSAS
Mounir AKSAS
The Gurney flap (GF) is a simple flat plate frequently mounted at the airfoil rear. Several investigations have been devoted to studying the effect of a rigid or even movable GF on the aerodynamic behavior of several devices such as flapping airfoils and vertical or horizontal axis turbines. The present paper proposes a new concept of a deformable Gurney flap (DGF) to improve the output power of a flapping airfoil in vertical mode. The advantage of this model is the full control of the effect on the GF during the flapping movement. The DGF is expandable and contractible which allows for monitoring and adjusting the pressure distribution at the appropriate time and position. By using a 2D transient simulation with a specific dynamic mesh design, an extended numerical analysis has been provided. It was found that this model is able to increase the output power by 19.5%. Furthermore, the concept of the DGF is applied on flapping turbines in hybrid modes such as swing arm mode and D-shaped mode. These modes are investigated to clarify the studied model’s advantage and to demonstrate the possibility of applying this strategy to control the different flapping movements.


31 October 2026 in Journal of the Brazilian Society of Mechanical Sciences and Engineering
Verified
Journal Article
Closed access
PDF file
MBMohamed taher Bouzaher
Mohamed taher Bouzaher
CSCharaf Eddine BEN SACI
Charaf Eddine BEN SACI
AZAmmar Zeghloul
Ammar Zeghloul
KIKhaoula Ikhlef
Khaoula Ikhlef
ABAbdelhamid Bouhelal
Abdelhamid Bouhelal
Fran SanchezFran Sanchez
Fran Sanchez

19 December 2025 in Applications in Engineering Science
Verified
Journal Article
Open access
CSCharaf Eddine BEN SACI
Charaf Eddine BEN SACI
MBMohamed Taher Bouzaher
Mohamed Taher Bouzaher
KIKhaoula Ikhlef
Khaoula Ikhlef
AZAmmar Zeghloul
Ammar Zeghloul
ABAbdelhamid Bouhelal
Abdelhamid Bouhelal