This study developed an interferometric fiber optic gyroscope (IFOG) with thin-film lithium niobate (TFLN) modulator chip. An integrable TFLN modulator with simple structure and polarizing capability was proposed. A ridge-type TFLN functional structure was designed, and an attractive polarization extinction ratio exceeding 32 dB was achieved. Simultaneously, excellent electrical properties were achieved, with modulation nonlinearity and residual intensity modulation of 8.1‰ and 1.5‰, respectively. Based on the TFLN modulator chip and a 450 m optical fiber coil, an IFOG was constructed, and a bias instability of 0.09°/h was obtained. This demonstrated its potential to match navigation-level applications. The results verified the practical application feasibility of TFLN modulators in optical gyroscopes. Moreover, they provide a path for the further realization of higher-integrated IFOG.
The miniaturization and integration of optical gyroscopes have urgent application demands in the field of inertial sensors. The key to achieving the miniaturization and integration of an integrated optical gyroscope (IOG) is to use waveguide-based interference ring instead of fiber loops, and their performance directly determines the detection sensitivity of the gyroscope. In this study, we successfully designed and fabricated an ultralow-aspect-ratio silicon nitride (Si 3 N 4 ) waveguide interference ring with bending radius of 17.5 mm, a length of 3.003 m, a propagation loss of 13.1 dB, a coupling loss of 1.5 dB, and a footprint of 9.6 cm 2 . Finally, an open-loop gyroscope test system was built using the Si 3 N 4 waveguide interference ring, and a long-term (3600s) bias instability of 11.8 °/h was successfully demonstrated. It is proved that the waveguide ring is feasible to replace the optical fiber ring. In conclusion, we believe that the successful fabrication of the Si 3 N 4 waveguide interference ring lays a solid foundation for the miniaturization and integration of IOG and paves the way for the wider application.
24 September 2024 in Journal of Lightwave Technology
A high-performance miniaturized fiber optic gyro (FOG) with optimized size, weight, and power is crucial for advanced inertial measuring units (IMUs). To partially replace bulky discrete passive optical components, an optical passive chip fabricated on an ultralow-loss silicon nitride photonic platform was developed. This chip boasts impressive performance characteristics, including full-temperature insertion loss (this refer to the insertion loss measured across various temperature ranges) of less than 11.2 dB, a polarization extinction ratio (PER) exceeding 28 dB, and an edge coupling loss of less than 1 dB/facet. Further tests of the IFOG based on the passive chip have demonstrated a bias instability of up to 0.009°/h, which is the best result of the same type IFOGs reported to date, to the best of our knowledge. The viability of passive chips in high accuracy, low cost, and compact IFOGs has been fully demonstrated.
This study presents a three-axis interferometric fiber optic gyro (TA-IFOG) that utilizes a silicon-based multi-channel integrated detector chip(MC-IDC) to enhance the system's performance and compactness. Advanced optical integration techniques enable the incorporation of couplers, polarization beam splitters, and photodetectors onto a single chip, thereby further streamlining the design. The test results indicate that the MC-IDC performs excellently. The power distribution across each channel is uniform, with an extinction ratio of 20 dB and a loss of approximately 18 dB. The chip's photoelectric conversion efficiency surpasses 0.9 A/W, and it maintains a dark current below 3.4 nA. Furthermore, testing of the TA-IFOG system confirms that its accuracy is better than 0.18°/h under normal temperature conditions. In comparison with traditional three-axis fiber optic gyros, the TA-IFOG system offers a simplified design that significantly reduces both cost and size, thereby increasing its potential for broader market adoption.
This study develops an integrated optical gyroscope that is based on a hybrid integrated optical transceiver module. An integrated optical module, on the same chip, simultaneously integrates the chip-level broad spectrum laser light source, photodetector, and coupler through a single mode fiber optic connection with the subsequent system. After packaging, the size of the entire module is 38.2 mm × 30 mm × 8 mm, the output light power is 0.693 mW, the polarization extinction ratio is 0.83 dB, and the responsiveness is 0.35 A/W. The module is connected to a 460 m-long optical fiber ring to form an Interferometric Fiber Optic Gyroscope (IFOG) system, and the overall accuracy can reach 0.039 °/h, thereby achieving navigation-grade precision. This work provides a scheme verification for the integration between optical chips of different materials, and carries out a deeper exploration for the development of hybrid integrated optical chips for optical sensing in the future, thereby achieving an important breakthrough for the improvement of the overall integration degree of IFOG.