17 June 2024 in IEEE Sensors Journal
The miniaturization and integration of optical gyroscopes have urgent application demands in the field of inertial sensors. The key to achieving the miniaturization and integration of an integrated optical gyroscope (IOG) is to use waveguide-based interference ring instead of fiber loops, and their performance directly determines the detection sensitivity of the gyroscope. In this study, we successfully designed and fabricated an ultralow-aspect-ratio silicon nitride (Si 3 N 4 ) waveguide interference ring with bending radius of 17.5 mm, a length of 3.003 m, a propagation loss of 13.1 dB, a coupling loss of 1.5 dB, and a footprint of 9.6 cm 2 . Finally, an open-loop gyroscope test system was built using the Si 3 N 4 waveguide interference ring, and a long-term (3600s) bias instability of 11.8 °/h was successfully demonstrated. It is proved that the waveguide ring is feasible to replace the optical fiber ring. In conclusion, we believe that the successful fabrication of the Si 3 N 4 waveguide interference ring lays a solid foundation for the miniaturization and integration of IOG and paves the way for the wider application.
10 October 2022 in IEEE Sensors Journal
A novel resonant optical voltage sensing scheme based on Pockels effect with less optical elements is proposed to pave the way for the miniaturization of voltage sensors in high voltage power grid, which can improve the voltage detection accuracy by using the multiple propagation of light in the resonator composed of BGO crystal and reflector. Based on the multiple beam interference theory, the optical sensing model is analyzed to explore the influence of the key parameters such as the propagation loss and the resonator reflectivity on the performance of resonant optical voltage sensor. Considering the propagation loss and reflectivity, a resonator is designed to promote the limit sensitivity of the resonant optical voltage sensor. And, based on the theoretical analysis results, we obtained that the design parameters (propagation loss μ and reflectivity r ) of the resonator are respectively μ≤0.5 and r ≥0.83. Finally, the experimental equipment of the novel resonant optical voltage sensor is built, and the measured resonator finesse shows that the limit sensitivity of the resonant optical voltage sensor can achieve 3.689×10 -5 V. Furthermore, the experimental results of the resonant optical voltage sensor demonstrate that the resonant frequency of the resonator is linear with the applied voltage. The proposed resonant sensing scheme has the potential to lay the foundation for the miniaturization of high-precision optical voltage sensors in the future.
24 November 2020 in Journal of Lightwave Technology
In this paper, a closed-loop signal detection method is proposed to improve the dynamic performance of the resonant integrated optical gyroscope. We firstly establish a closed-loop error model of the angular velocity tracking system with optical nonlinearity and parameter uncertainty based on triangular phase modulation technology. Then, we optimize the loop gains of the signal processing to improve the signal-to-noise ratio of the closed-loop error signal about angular velocity tracking. Secondly, we design a timing sequence control method to effectively eliminate the time-delay of signal processing for optimizing the dynamic performance of the angular velocity tracking system. Finally, a control algorithm is designed to suppress the influence of the optical nonlinearity and parameter uncertainty for improving the dynamic tracking performance of resonant integrated optical gyroscopes. The experimental results demonstrate that the resonant integrated optical gyroscope has a rise time less than 36us, a high frequency response with the bandwidth 13.1kHz and a low scale factor nonlinearity less than 269.2ppm, which verifies the effectiveness of the proposed closed-loop signal detection method for the resonant integrated optical gyroscope.
20 February 2025 in IEEE Sensors Journal
As an important component in inertial navigation system, the fiber optic gyroscope (FOG) is developing towards integration and miniaturization. In this paper, an integrated photonic chip comprised of a light source, three photodiodes, and four 3-dB couplers for three-axis FOG based on silica waveguide is proposed. The interferometric fiber optic gyroscope (IFOG) assembly process is simplified, the cost is reduced and production efficiency is improved. The overall size of the three-axis IFOG is reduced significantly to only 50 mm × 50 mm × 30 mm, a bias stability is better than 0.5°/h for a sensing coil with a diameter of 26 mm, and can satisfy the requirements of tactical-grade compact inertial navigation systems. To the best of our knowledge, this is the first reported to date for the three-axis silica integrated optical chip-based IFOG.
10 November 2021 in Journal of Lightwave Technology
With on-chip integration enabled, resonant integrated optical gyroscope (RIOG) is a promising choice of rotation rate sensor in the novel micro inertial navigation systems. However, various optical errors, especially the backward-light-related errors including backscattering error and back-reflection error caused by the manufacturing process and heterogeneous materials in the optical elements, limit the performance of RIOG. Here, we propose the frequency spectrum separation method to suppress the backward-light-related errors for improving the detection precision of RIOG. The method can separate the angular velocity signal from the backward-light-related errors in the frequency domain. And, we investigate the optimal strategy of modulation frequencies to obtain maximum spectrum gaps of clockwise and counter-clockwise light for suppressing the backward-light-related errors, and simultaneously maintain maximum demodulation gain and minimum nonlinearity of optical effect for improving detection sensitivity. With the frequency spectrum separation method, the long-term bias stability of RIOG achieves 0.3°/h based on Allan deviation, which is the best reported result to the best of our knowledge. The proposed method of backward-light-related errors suppression can significantly improve the detection precision of RIOG based on a photonic chip, which contributes to the application of RIOG in the novel micro inertial navigation field such as cluster unmanned aerial vehicles and micro-nano satellites.
24 August 2021 in IEEE Sensors Journal
The temperature-dependent polarization induced bias drift is a major factor affecting the long-term zero-bias stability of integrated optic gyro (RIOG). The silicon nitride (Si 3 N 4 ) with high-aspect-ratio core geometry allows high polarization extinction ratio and ultra-low propagation loss. We start from suppressing the polarization noise of the RIOG and design a single polarization Si 3 N 4 waveguide ring resonator (WRR) with a radius of 17.5 mm. We established the polarization model of the WRR. It is found through simulation that when the polarization-dependent loss of the Si 3 N 4 waveguide reaches 800 dB/m, it can maintain the single-polarization performance, thereby suppressing the polarization noise of the gyroscope. And the relationship between the coupling coefficient of the coupler and the limit sensitivity, finesse and transmittance was determined. The cross-sectional size of the Si 3 N 4 WRR is determined to be $4\,\,\mu \text{m}\,\,\times 40$ nm simultaneously by simulation. Finally, through its processing and testing, a single-polarization WRR with a finesse of 127, the quality factor is $1.31\times 10 ^{7}$ , a transmission loss of 2.5 dB/m, and a polarization-dependent loss of 810 dB/m is obtained. Meanwhile, we prove its single-polarization performance at different temperature. The successful design and fabrication of the WRR is expected to achieve high precision RIOG.