In this article, a dual-mode, dual-polarized antenna designed using characteristic mode analysis (CMA) is described. An elliptical-shaped patch radiator is chosen with double slits on its minor axis. This design is based on mode separation from the circular patch into the elliptical patch. The suggested antenna geometry has a footprint of 60 mm × 60 mm × 1.6 mm. To design and fabricate the antenna, an FR-4 substrate with a relative permittivity of 4.3 is used, along with copper sheets 0.035 mm thick for the ground plane and the radiating plane. The circular patch has the resonating mode at 1.8 GHz, whereas the elliptical radiator gives different resonant modes at 1.8 GHz and 3.5 GHz. An orthogonal mode is excited with a 50-Ω coaxial feed line at 3.5 GHz by applying a full-wave approach. The antenna gives a −10dB bandwidth of 51 MHz (1.77–1.82 GHz) centered at 1.8 GHz and a bandwidth of 210 MHz (3.37–3.58 GHz) centered at 3.5 GHz. The working principle is explained through modal analysis and characteristic angles. This dual-band antenna covers a 1.8 GHz GSM band with horizontal polarization and a 3.5 GHz 5G service with vertical polarization. Peak gain attained with these bands is 5.9 dBi and 7.1 dBi, respectively. A CST full-wave simulator is used for the simulations. As a result of the antenna, radiation is stable and enhanced. Compared to measured results, simulation results are close to reality. The characteristic mode analysis (CMA) provides an in-depth look into different operating modes on the antenna in contrast with the conventional method, which relies on the simulated current distribution to verify functionality.
Industrial wireless sensor networks (IWSNs) have to continuously monitor process and transmit signals from the industrial environment with strict energy limitations. The impact of energy depletion–induced signal interruptions is significant on the reliability of tasks and the real‐time industrial operation. To overcome this challenge, a signal‐aware reliant task scheduling scheme (RTSS) for rechargeable IWSNs with energy harvesting mechanisms is proposed in this paper. The RTSS is based on a research gap–driven principle: For every researched limitation, a corresponding innovation is developed: a real‐time signal–energy coupling model that continuously monitors signal traffic density and node energy levels during periods of active signal processing; a knowledge‐learning mechanism that dynamically classifies nodes as available, idle, or low‐energy, allowing for proactive task allocation decisions without reliance on static energy assumptions; a dynamic task reallocation strategy that seamlessly transfers tasks from energy‐degraded nodes to available alternate processing nodes before signal interruptions; and an embedded energy harvesting module that recharges low‐energy nodes during idle processing periods to ensure long‐term network operability. The RTSS continuously updates its knowledge base over a scheduling interval, thereby enhancing the accuracy of the scheduling over time and continuity of its signal. The evaluation through simulation with a real‐world computer numerical control (CNC) machine dataset of 200 tasks and 60 sensor nodes verifies the superiority of the proposed RTSS over the state‐of‐the‐art RTSS baselines: joint power function–network‐in‐box (JPF‐NIB), low‐complexity channel resource allocation algorithm (LCCRAA), and enhanced energy optimization model (EEOM), in all critical performance metrics. In particular, the RTSS yields improvements of 10.48%, 10.87%, and 10.38% in the signal awareness task scheduling rate, successful signal delivery ratio, and energy harvesting rate, respectively, and reduces the average energy consumption by 8.63% and signal interruptions by 13.66% compared with the best performing baseline. The findings demonstrate the adaptability, scalability, and reliability of the RTSS for handling energy constraints in industrial applications with the requirement of uninterrupted signal processing and task execution.