The subject of study in the article is the algorithms for radio monitoring of the Earth in a wide field of view from aerospace transport. The goal is to design a structural diagram of a radio complex that can operate simultaneously in two modes: modified synthetic aperture (SAR) and aperture synthesis (ASR), in accordance with algorithms synthesized by the maximum likelihood method. The modified SAR mode allows obtaining high-resolution radio images in the observation angle range ±(20°...50°) from the direction to the nadir. A method of combining a modified SAR algorithm is used, which differs from the classical imaging algorithm by the possibility of obtaining a higher spatial resolution, the payment for this is the complication of the signal processing algorithm associated with the implementation of decorrelating filters that expand the spectrum of received signals in each receiving path, and the ASR mode, which allows imaging using passive or active radar principles. The passive ASR mode provides for the imaging in the observation angle range of ±20° from the nadir based on the results of processing signals of its own broadband radio-thermal radiation, and the active mode – in the same observation angle range, but using the broadband noise signal of the backlight. An important result in the formation of a radio image in the specified viewing area when using the active mode of the ASR is that the images are close in physical content, namely, proportional to the specific effective reflection surface of the underlying surface. In addition, a distinctive feature of the synthesized algorithms is the use of wideband probing signals and, accordingly, the same input paths of receivers, which makes it possible to increase the signal-to-noise ratio of the output effect. Conclusions. The scientific novelty of the results obtained is as follows: a structural diagram of the radio complex was developed on the basis of algorithms synthesized by the maximum likelihood method. For the formation of a radio image in the radio complex, a combination of SAR and ASR (with two modes of operation) is implemented. This implementation is important, since it allows obtaining high-resolution images in the observation angle range of ±50° from the direction to the nadir. It is advisable to place the complex on airplanes, helicopters and spacecraft (preferably those that move in low orbits).
This manuscript focuses on the process of measuring the angular positions of radio sources using radio engineering systems. This study aims to improve the accuracy of measuring the angular positions of sources that radiate functionally determined signals and to expand the range of the unambiguous operation angles for multi-antenna radio direction finders. To achieve this goal, the following tasks were addressed: (1) defining the models of signals, noise, and their statistical characteristics, (2) developing the theoretical foundations of statistical optimization methods for measuring the angular positions of radio sources in multi-antenna radio direction finders, (3) optimizing the structures of radio direction finders with different configurations, (4) analyzing the accuracy and range of the unambiguous measurement angles in the developed methods, and (5) conducting experimental measurements to confirm the main results. The methods used are based on the statistical theory of optimization for remote sensing and radar systems. For the specified type of signals, given by functionally deterministic models, a likelihood function was constructed, and its maxima were determined for different multi-antenna direction finder configurations. The results of statistical synthesis were verified through simulation modeling and experiments. The primary approach to improving measurement accuracy and expanding the range of unambiguous angles involves combining antennas with different spatial characteristics and optimally integrating classical radio direction-finding methods. The following results were obtained: (1) theoretical studies and simulation modeling confirmed the existence of a contradiction between high resolution and the width of the range of the unambiguous measurements in two-antenna radio direction finders, (2) an improved signal processing method was developed for a four-antenna radio direction finder with a pair of high-gain and a pair of low-gain antennas, and (3) to achieve maximum direction-finding accuracy within the unambiguous measurement range, a new signal processing method was synthesized for a six-element radio receiver, combining processing in two amplitude direction finders and one phase direction finder. This work provides a foundation for further theoretical studies, highlights the specifics of combining engineering measurements in direction-finding systems, and offers examples of rapid verification of new methods through computer modeling and experimental measurements.
An optimal method of combining the results of parameter measurements in multichannel radiometric receivers for detecting unmanned aerial vehicles (UAVs) of different sizes in the contrast between the sky and an object for three different wavelengths is proposed. The developed theoretical bases of construction of radiometric complexes will allow to create samples of radio engineering systems that will satisfy contradictory requirements to radio engineering measurements - high spatial resolution, high fluctuation sensitivity and all-weather.
The optimal design and efficient operation of unmanned aerial vehicle (UAV) detection systems require the ability to adequately predict the expected contrast values of target types of interest and their weather stability in different wavebands. This work is devoted to the experimental and theoretical study of the contrasts of various types of small UAV in the CM and MM wavelength ranges (WR) in relation to systems operating in the passive radiothermal location mode.
28 August 2024 in RADIOELECTRONIC AND COMPUTER SYSTEMS
The subject of this article is the design of a cheap, simple, and highly accurate on-board radar system for determining the angular position of radio-signal emission stations, which can be used to guide UAVs to a specified area of space. The aim of this study is to develop high-precision functioning algorithms, practical recommendations for implementation, and experimental measurements of the main parameters of the onboard radio direction finders of radio radiation sources placed on winged UAVs. Objectives of the research: 1) analysis of the statistical theory of optimization of signal processing algorithms in radar systems; 2) synthesis of direction-finding algorithms for radio measurement sources capable of performing measurements with high accuracy and in a wide range of unambiguous measurement angles; 3) synthesis of the radio direction finder structural scheme and its simulation modelling; 4) design of radio direction finder receiving antennas capable of operating separately and in a complex; 5) justification of the choice of components for the input paths of receivers, parameters of ADC and microcomputers that make up the main components of the radar complex; 6) manufacturing of a working model of the radar complex; 7) experimental measurements in the laboratory. The methods for solving the tasks are based on the statistical theory of optimization of radio engineering systems for remote sensing and radar, existing software tools for simulation modelling, and the theory of radio measurements. The main idea behind creating a cheap, simple, and highly accurate on-board radar system for radio emitter direction finding is to combine the results of angular position measurements from several amplitude and phase meters. This approach allows us to create an easy-to-implement radio system with the advantages of different measuring instruments. The following results were obtained: 1) theoretical studies and simulation modelling confirmed that by combining measurements from a two-antenna amplitude direction finder with narrow diagrams, a two-antenna direction finder with wide diagrams, and a two-antenna phase finder, it is possible to achieve both high accuracy and a wide range of unambiguous measurements; 2) a radar system based on a cheap and commonly available element base was developed; 3) antennas were developed that can be easily installed under the wings of UAVs; 4) experimental studies confirmed the performance of complex signal processing in an on-board six-antenna radio direction finder. The material of this work forms the basis for further experimental development of radio-direction finders for various purposes, opens up opportunities for overcoming the contradiction between accuracy and range of unambiguous measurements, and highlights an additional direction for increasing the autonomy of winged UAVs.
29 August 2020 in Aerospace technic and technology
The task of synthesizing optimal signal processing in synthetic aperture radars equipped with a selection mode of power lines was solved by the maximum likelihood method. The distinguishing features of power lines from the earth's surface selected polarization and Doppler differences. The useful signal at the output of the coherent receiver specified in an analytical form with a complex envelope and high-frequency harmonic oscillations. The background radiation of the underlying surface is presented in a stochastic form and is completely determined by the matrix of correlation functions. The internal noise of a multichannel receiver is described by a delta-correlated random Gaussian process with the same power spectral density in different observation channels. Since the background radiation of the earth's surface is correlated in time and at different polarizations functional likelihood recorded with the inverse matrix inverse correlation functions. The obtained optimal algorithm consists of suppression of passive interference in decor-leveling filters, optimal coherent accumulation of trajectory signals for synthesizing the on-board antenna aperture, and their optimal filtering in filters matched with the reference signal. Simultaneous use of Doppler and polarization differences between wanted signals and passive interference allows you to effectively allocate power lines against the background of reflections from the ground in multichannel synthetic aperture radars. The proposed sequence of operations on the received oscillations can be a functional addition to the operating modes of aerospace-based cognitive radars, adapting by the covariance scattering matrix of the underlying surface known in advance or measured during remote sensing. The block diagram of a multichannel onboard polarization radar with a synthesized antenna aperture is synthesized based on the obtained results. The development of such a radar is relevant for a collision warning system for helicopter pilots, especially in bad weather conditions at any time of the year, day and night.