Dredged silt, characterized by high moisture content, low shear strength, and poor permeability, presents significant challenges for direct engineering application, leading to excessive land occupation and unsustainable resource management. To address these issues, solidification-lightweight composite technology has emerged as a promising approach to transform dredged silt into sustainable geo-materials. This review systematically evaluates international research progress on silt solidification, focusing on (1) the chemical reaction mechanisms of varied solidification agents, (2) the quantitative effects of key factors (e.g., agent dosage, curing time, and organic content) on the mechanical properties (unconfined compressive strength and shear strength) of treated silt, and (3) a critical discussion on technological limitations and future research directions. The findings provide insights for optimizing treatment protocols and advancing large-scale applications.
The bandgap characteristics of locally resonant phononic crystals (LRPC) are a comprehensive manifestation of the design parameters (including structural and material parameters). In order to investigate the composite influence mechanism of the design parameters on the bandgap characteristics of LRPC, the response surface methodology (RSM) is performed to collectively analyze and multi-objectively optimize the bandgap characteristics (starting bandgap frequency, cutoff bandgap frequency, and bandgap width) of LRPC to achieve an effective coverage of the target frequency range. Firstly, the bandgap characteristics of the LRPC are comprehensively analyzed by the finite element method (FEM), and the key design parameters sensitive to the bandgap are identified. Then, with the help of Box-Behnken design technique in RSM, the response surface regression models adapted to the structural and material parameters that can be used to describe the bandgap characteristics of the LRPC are established, and the effects of the interactions between the design parameters on the bandgap characteristics of the LRPC are highlighted and recognized. Finally, the bandgap characteristics of LRPC are synthetically optimized by the multi-objective simultaneous nonlinear optimization technique, and the design parameters that satisfy the target frequency range are obtained. The results demonstrated that the structural parameters (lattice constant, scatterer radius and coating radius) and material parameters (scatterer density, elastic modulus and Poisson’s ratio of the coating, and matrix density) are the key design parameters affecting the bandgap characteristics of LRPC. The optimal structural parameters and optimal material parameters that can be used to effectively cover the target frequency range are obtained through the optimized design, respectively. The established response surface regression model features good accuracy and predictability, which provides an effective means for the efficient design of the bandgap characteristics of LRPC.
As an innovative inorganic cementitious material, geopolymer holds significant application potential in the field of road engineering. Based on the theoretical basis of industrial solid waste resource utilization and combined with geopolymerization technology, this study investigates the feasibility of applying lead–zinc-tailing-based geopolymer–stabilized aggregate (LZT-GSA) in road engineering through systematic mechanical property tests, durability assessment, and microstructural characterization. The study focuses on the influence of cementitious material admixture on the unconfined compressive strength, splitting tensile strength, compressive resilient modulus, drying shrinkage, and freeze–thaw cycle resistance of LZT-GSA. The experimental results demonstrated that LZT-GSA exhibited excellent properties in terms of mechanical performance and durability, which were remarkably better than those of conventional cement-stabilized aggregates (CSA). However, the incorporation of a small amount of lead–zinc tailing alone can weaken the mechanical properties of CSA. The drying shrinkage of LZT-GSA was slightly higher than that of CSA due to the difference in the intrinsic reaction mechanism between LZT-GSA and CSA. The effective cementing and wrapping effect of geopolymer gel on discrete aggregate dramatically improves the structural compactness of LZT-GSA. The leaching concentration of heavy metals in LZT-GSA is far below the requirements of environmental protection standards. These research results not only provide theoretical support for the resource utilization of lead–zinc tailings, but also lay a technical foundation for its practical application in road engineering.
15 July 2024 in International Journal of Structural Stability and Dynamics