Wenshuai Liu

Dr. Wenshuai Liu


Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 March 2025 in Crystals
Verified
Journal Article
Open access
PDF file
MQM Qh
M Qh
WLWenshuai Liu
Wenshuai Liu
Yanchun ZhuYanchun Zhu
Yanchun Zhu
Ling QinLing Qin
Ling Qin
JZJingfeng Zou
Jingfeng Zou
In this study, the high-temperature thermal deformation behavior of the TA4 alloy was investigated by thermal compression experiments. The effects of deformation temperature and strain rate on the rheological stress are described by analyzing the variation of stress–strain curves with different parameters and establishing the constitutive equation based on the dynamic material theory model. Thermal processing diagrams were established and plotted to analyze the optimal processing zone and the destabilization zone under different strains. From the thermal machining diagram, it can be concluded that the optimum machining zone at a strain of 0.9 is 1040~1133 K/0.01~0.7 s−1. The optimum machining zone at a strain of 0.6 is 940~1000 K/0.01~0.04 s−1. The optimum machining zone at a strain of 0.3 is 940~1000 K/0.01~0.08 s−1. The effects of different deformation conditions on the thermal deformation mechanism were analyzed in conjunction with EBSD characterization. The results showed that dynamic recrystallization (DRX) was the main deformation softening mechanism when at low strain rate (≤0.1 s−1). At higher strain rates (>0.1 s−1) and lower temperatures (<1083 K and ≥933 K), the main deformation softening mechanism was DRV; at higher temperatures (≥1083 K and ≤1133 K), the main deformation softening mechanism was DRX.

24 February 2025 in Preprints.org
Verified
Preprint
Open access
PDF file
MQM Qh
M Qh
WLWenshuai Liu
Wenshuai Liu
Yanchun ZhuYanchun Zhu
Yanchun Zhu
Ling QinLing Qin
Ling Qin
JZJingfeng Zhou
Jingfeng Zhou
In this study, the high-temperature thermal deformation behavior of TA4 alloy was investigated through thermal compression experiments. The effects of deformation temperature and strain rate on rheological stress were analyzed by examining the variations in stress-strain curves under different conditions and establishing a constitutive equation based on the dynamic material theory model. The prediction accuracy of the developed constitutive model was evaluated, yielding a correlation coefficient of 0.9612 between predicted and experimental values, an average absolute percentage error of 8.7210%, and an average root mean square error of 11.0635 MPa. Thermal processing diagrams were established and plotted to analyze the optimal processing zone and the destabilization zone under different strains. The optimal processing zones at different strains are obtained from the thermal processing diagrams, which are 1040~1133K, 0.01~0.7s-1 at a strain of 0.9, 940~1000K, 0.01~0.04 s-1 at a strain of 0.6, 940~1000K, 0.01~0.08s-1 at a strain of 0.3, 940~1000K, 0.01~0.08s-1 at a strain of 0.3. Additionally, the thermal deformation mechanisms of TA4 alloy under varying deformation parameters were analyzed using EBSD characterization. The results indicate that the primary deformation softening mechanisms include dynamic recovery (DRV) at low temperatures and high strain rates, dynamic recrystallization (DRX) at high temperatures and high strain rates, and DRX at low strain rates.