The adoption of circularity indicators in the electrical and electronic sector is understood to play a critical role in organisational decision making during the transition from a linear to a circular economy. Yet, it is widely recognised that there is no standardised method of measuring circularity performance. Additionally, the extent of literature uncovers a range of shortcomings of existing cross-sector circularity indicators, including a predominant focus on end-of-life, limited coverage of social measurements, a lack of sector specificity and limited capture of product functionality, durability or sharing. Furthermore, the current electrical and electronic sector-specific circularity indicators focus greatly on repair and recycling, failing to acknowledge the significant impact on circularity of the design and manufacturing, distribution and use phases. Therefore, this research set out to answer how electrical and electronic manufacturers can measure the circular economy performance of their products by developing and testing multidimensional circularity indicators for all products’ life cycle stages. To achieve this, a two-fold qualitative approach was adopted. Firstly, a stakeholders’ workshop aiming to generate, categorise and rate novel circularity indicators was held. Secondly, a focus group piloted the resulting workshop’s circularity indicators. The findings highlight key factors that influence circularity indicators’ applicability to electrical and electronic products, including product function, service arrangement, and customer type. The research has implications for electrical and electronic organisations seeking pathways to the circular economy by understanding, assessing, and measuring the circularity of their products.

We re-examined the sensitivity and specificity of 31 PCR assays (including four commercially available and developed in-house methods) for the identification of Campylobacter species, with particul...

A survey of the toxicity of soils from the several industrial zones of the Spanish Basque Country was undertaken in order to identify the relationship between chemical contamination and toxicity. The measured effect in the solid and liquid‐phase Microtox toxicity test was correlated with the chemical parameters to determine the origin of the toxicity effect. Results indicate the higher sensitivity of solid‐phase bioassay. In a comparative study with the liquid‐phase assay it was found that due to different solubility of each contaminant in water the test on the extracts represents only a part of multiple contamination. Moreover water elutriation could underestimate the types and concentrations of organic contaminants present.

Alkyd resins are still one of the most important classes of binders for paint systems. They are outstanding in terms of their versatility of formulations and applications, cost-effectiveness, and durability. Traditionally, they are synthesized using phthalic anhydride, polyalcohols with three or four functional groups (pentaerythritol, glycerol, and trimethylolpropane), and fatty acids or oils. In this study, new bio-alkyd resins were synthesized with the objective of increasing the bio-based content by substituting phthalic anhydride, thereby also enhancing the biodegradability of coatings. The newly synthesized alkyd resins, formulated with azelaic acid, were used to develop coatings incorporating additives while avoiding cobalt-based driers. Additional agents such as leveling, wetting, and anti-skinning agents, were also included. Paints were applied to wood substrates and dried at room temperature. The resulting films were characterized by pendulum hardness, transparency, and color by colorimetry, cross-cut test, contact angle, and gloss. Thermal properties were analyzed by Differential Scanning Calorimetry (DSC), and Total Organic Carbon (TOC) content and aerobic biodegradation were also evaluated. The resulting coating films exhibited good mechanical performance, with hardness values ranging from 132 to 148 Persoz oscillations and strong adhesion to wood substrates (smooth cross-cut edges, Class 0). Significant biodegradability (70% in less than 90 days) was demonstrated under composting conditions, which was considerably higher than that of a commercial reference alkyd coating (34.7%) under the same conditions. These findings suggest that the developed bio-alkyd coatings formulated with azelaic acid and DCO-FA without cobalt-based driers represent a promising alternative to conventional phthalic acid-based alkyds. These novel coatings move closer to fully bio-based formulations and offer enhanced biodegradability, making them a more sustainable option for coating applications.