The rational configuration of electronic band structures through deep-seated structural disorder remains a formidable challenge in sustainable solar-to-fuel conversion. Herein, we report a transformative kinetic strategy to “freeze” an extraordinary density of non-equilibrium structural defects within an integrated Cu4MgO5/ZnO nanocomposite. Synthesized via a chitosan-assisted coordination-combustion route followed by rapid thermal quenching, the material preserves a record crystallographic dislocation density of 1.09 × 1015 m−2 and significant lattice microstrain (1.04 × 10−3). This engineered structural disorder induces a profound reconfiguration of the electronic landscape, generating a continuous manifold of sub-bandgap “tail states” that narrow the optical bandgap to a remarkable 1.34 eV. Consequently, the defect-rich architecture facilitates unprecedented dual-channel photocatalytic performance under simulated solar irradiation in an aqueous solution containing 5 vol% triethanolamine (TEOA) as a sacrificial electron donor; the catalyst achieved a hydrogen evolution rate of 17,700.0 µmol g−1 h−1 and a methane production rate of 172.50 µmol g−1 h−1—representing a 36.3-fold and 43.1-fold enhancement over commercial ZnO, respectively. With an apparent quantum yield of 8.42% at 420 nm and robust photostability—maintaining 95.3% of its activity over five consecutive cycles (25 h total)—this noble-metal-free ternary system bypasses the limitations of traditional heterojunctions. Our findings establish a new benchmark for defect-engineered catalysts, providing a scalable blueprint for high-efficiency carbon neutrality and solar fuel production.
19 February 2026 in The Canadian Journal of Chemical Engineering
Rising volumes of agri-food waste highlight the need for innovative valorization strategies that simultaneously reduce environmental burdens and support sustainable agriculture. In this study, eggshell powder (ESP), spirulina powder (SP), and tannic acid (TA)—three low-cost amendments derived from food waste and algal biomass—were combined for the first time to evaluate their effects on the germination of durum wheat (Triticum durum Desf., cv. Vitron ORD). A Box–Behnken design coupled with response surface methodology (RSM) was employed to optimize the formulation across 17 experimental runs, using SP (0.2–1.0 g), ESP (0.4–1.2 g), and TA (0.005–0.015 g) as independent variables. An untreated distilled-water control and an artificial neural network (ANN) model were used for comparison and prediction assessment. Germination percentage varied substantially among treatments, ranging from 10.67% to 82.67%, compared with 48.00% in the untreated control. Formulations containing low SP, moderate-to-high ESP, and low TA mass exceeded the control, whereas high SP mass generally exerted inhibitory effects. The quadratic RSM model showed an excellent fit to the experimental data (R2 = 0.9905; adjusted R2 = 0.9783). Desirability-function optimization identified an optimal formulation consisting of 0.200 g SP, 0.766 g ESP, and 0.00534 g TA, with a predicted germination rate of 82.68%. The ANN model showed slightly superior predictive performance compared with RSM (R2 = 0.99452; MAE = 0.470). Overall, the optimized low-dose SP–ESP formulation with minimal TA substantially enhanced germination relative to the untreated control, demonstrating the potential of combining algal biomass and food-waste-derived materials as a low-cost and environmentally sound strategy for seed priming and agricultural waste valorization.