This study presents the development of predictive models for concrete performance, specifically targeting the compressive strength and slump value, utilizing the quantities of individual raw materials in the concrete mix design as input variables. Three distinct machine learning approaches—Backpropagation Neural Network (BPNN), Support Vector Machine (SVM), and Random Forest (RF)—were employed to establish the prediction models independently. In the model construction process, the Particle Swarm Optimization (PSO) algorithm was integrated with cross-validation to fine-tune the hyperparameters of each model, ensuring optimal performance. Following the completion of training and modeling, a comprehensive comparison of the predictive accuracy among the three models was conducted, with the aim of selecting the most suitable model for incorporation into an optimized objective function. The findings reveal that among the chosen machine learning techniques, BPNN exhibited superior predictive capabilities for the compressive strength of concrete. Specifically, in the validation set, BPNN achieved a high correlation coefficient (R) of 0.9531 between the predicted and actual outputs, accompanied by a low Root Mean Square Error (RMSE) of 4.2568 and a Mean Absolute Error (MAE) of 2.6627, indicating a precise and reliable prediction. Conversely, for the prediction of the concrete slump value, RF outperformed the other two models, demonstrating a correlation coefficient (R) of 0.8986, an RMSE of 9.4906, and an MAE of 5.5034 in the validation set. This underscores the effectiveness of RF in capturing the complexity and variability inherent in slump behavior. Overall, this research highlights the potential of integrating advanced machine learning algorithms with optimization techniques for enhancing the accuracy and efficiency of concrete performance predictions. The identified optimal models, BPNN for compressive strength and RF for slump, can serve as valuable tools for engineers and researchers in the field of construction materials, facilitating the design of concrete mixes tailored to specific performance requirements.
The current research endeavors to explore the mechanical properties of recycled concrete cubic specimens, predominantly concentrating on macroscopic attributes such as compressive strength and splitting tensile strength. However, at the mesoscopic scale, the internal structure of recycled concrete becomes increasingly intricate due to the adherence of substantial mortar on the surface of recycled coarse aggregates, ultimately influencing its macroscopic mechanical behavior and crack propagation trajectories. To address this complexity, Digital Image Correlation (DIC) technology is harnessed to quantitatively analyze crack tip displacement fields and crack propagation behavior in recycled concrete, considering variations in aggregate replacement ratios and particle sizes. This analysis encompasses quantitative assessments of pre-cracking damage, post-cracking crack morphology characteristics, and size. Utilizing the advanced 3D-DIC algorithmic technique, this study delves into the evolution of crack propagation patterns in recycled concrete during the loading process, evaluating the impact of both aggregate replacement ratios and particle sizes on crack propagation behavior. Ultimately, fractal theory is employed to provide a quantitative analysis of the crack morphology on the surface of recycled concrete.
Calcium Carbonate (CC) exhibits broad application prospects and significant market demand due to its diverse polymorphs, each with distinct potential for application in various fields. Consequently, the preparation of CC with specific polymorphs has emerged as a research hotspot. This paper commences with an overview of the structure of CC, followed by an analysis of the advantages and disadvantages, as well as the mechanisms, of common preparation methods such as physical methods, chemical carbonation processes, and double displacement reactions. Special emphasis is placed on elucidating the influence of polymorph control agents (including inorganic ions, sugars, alcohols, and acids), process conditions (temperature, stirring rate, pH, and solution mixing rate), and reactor configurations (rotating packed beds and high-gravity reactors) on the polymorph regulation of CC. This paper points out how these factors alter the crystal formation process. Furthermore, it introduces the nucleation and growth control of CC crystallization, analyzing the mechanisms underlying these two processes. Research indicates that the carbonation process is currently a relatively mature preparation technique, with multiple factors synergistically influencing the polymorph and particle size of CC. Future efforts should focus on further improving production processes, exploring novel polymorph control agents, and delving deeper into the intrinsic mechanisms of polymorph control to achieve efficient preparation of diverse CC types.
This study investigated the sulfate resistance of modified recycled aggregate concrete (RAC) by applying carbonation and nano-silica soaking methodologies. Recycled concrete aggregates (RCA) derived from concretes of C30 and C60 strength grades were subjected to these modification techniques and subsequently utilized in the fabrication of RAC specimens. The results show notable porosity and crack density within the interfacial transition zone (ITZ) interfacing recycled aggregate and cement paste in recycled aggregate concrete (RAC). Specifically, the porosity within the ITZ of RAC is observed to be up to 30% higher than that of virgin aggregate concrete. These pathways facilitate the penetration of sulfate ions, subsequently inducing deterioration and resulting in a compression strength reduction of up to 40%. While carbonation treatment exhibits a moderate enhancement in sulfate resistance, decreasing the sulfate penetration depth by 15%, the incorporation of 2% nano-silica by weight of cement proves significantly more effective. This addition reduces the sulfate penetration depth by over 30% and lowers the sulfate concentration by 25%. Furthermore, the compressive strength of RAC modified with nano-silica increases by 15% following 28 days of sulfate exposure. Additionally, a 30% reduction in the sulfate ion mass equilibrium depth is observed in nano-silica-modified RAC, accompanied by a markedly lower sulfate concentration in the pore solution. After 56 days of sulfate attack, the compressive strength of nano-silica-modified RAC retains 85% of its initial value, whereas unmodified RAC decreases to 70%. Notably, the quality of recycled aggregate significantly impacts sulfate resistance, with high-strength RCA (exceeding 40 MPa) demonstrating superior resistance compared to low-strength RCA (below 20 MPa). Consequently, RAC produced with high-strength RCA experiences only a 20% loss in compressive strength under sulfate attack, whereas RAC containing low-strength RCA suffers a 40% loss. The novelty of this study is the effective use of nano-silica soaking and carbonation to enhance the sulfate resistance and compressive strength of recycled aggregate concrete originated from both normal and high-strength reference concrete.
Herein, the study explores a composite modification approach to enhance the use of recycled concrete aggregate (RCA) in sustainable construction by combining accelerated carbonation (AC) and nano-silica immersion (NS). RCA, a major source of construction waste, faces challenges in achieving comparable properties to virgin aggregates. Nano-silica, a potent pozzolan, is added to fill micro-cracks and voids in RCA, improving its bonding and strength. AC pretreatment accelerates RCA’s natural carbonation, forming calcium carbonate that strengthens the aggregate and reduces porosity. Due to the complexity of the original RCA, a laboratory-simulated RCA (LS-RCA) is used in this study for the mechanism analysis. Experimental trials employing the composite methodology have exhibited noteworthy enhancements, with the crushing index diminishing by approximately 23% and water absorption rates decreasing by up to 30%. Notably, the modification efficacy is more pronounced when applied to RCA derived from common-strength concrete (w/c of 0.5) as compared to high-strength concrete (w/c of 0.35). This disparity stems from the inherently looser structural framework and greater abundance of detrimental crystal structures in the former, which impede strength. Through a synergistic interaction, the calcium carbonate content undergoes a substantial increase, nearly doubling, while the proportion of calcium hydrate undergoes a concurrent reduction of approximately 30%. Furthermore, the combined modification effect leads to a 15% reduction in total porosity and a constriction of the average pore diameter by roughly 20%, ultimately resulting in pore refinement that equates the performance of samples with a water-to-cement ratio of 0.5 to those with a ratio of 0.35. This remarkable transformation underscores the profound modification potential of the combination approach. This study underscores the efficacy of harnessing accelerated carbonation in conjunction with nano-silica as a strategic approach to optimizing the utilization of RCA in concrete mixes, thereby bolstering their performance metrics and enhancing sustainability.
Fly ash aggregates (FAAs) were synthesized via a hydrothermal process, involving the reaction of fly ash and cement at 180 °C under saturated steam conditions. A thorough examination was carried out to evaluate the impact of cement content on the physico-mechanical properties of the resulting FAAs. A comprehensive exploration was undertaken to decipher the mechanisms by which cement modulates the cylinder compressive strength of FAAs, encompassing mineralogical composition, microstructure, insoluble residue content, and loss on ignition. As the cement proportion increased, a concomitant rise in the amount of hydration products was observed, leading to an enhanced filling effect. This, subsequently, resulted in reduced water absorption and increased apparent density of the FAAs. The augmented filling effect of hydration products contributed to a gradual elevation in the cylinder compressive strength of FAAs as cement content escalated from 5 to 35 wt%. However, a significant transition occurred when cement content surpassed 35%, reaching 35–45 wt%. Within this range, the micro-aggregate effect was diminished, causing a decrease in cylinder compressive strength. The optimal equilibrium between the filling effect and micro-aggregate effect was attained at 35 wt% cement content, where the cylinder compressive strength of FAAs reached its peak value of 18.5 MPa. This research is expected to provide a feasible approach for solid waste reduction, with a particular emphasis on the utilization of fly ash.