Fei Peng

Dr. Fei Peng


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 June 2023 in Scientific Reports
Verified
Journal Article
Open access
PDF file
FPFei Peng
Fei Peng
LZLimei Zhang
Limei Zhang
ZLZhiqiang Li
Zhiqiang Li
陈C陈建明、李倩 Chen
陈建明、李倩 Chen
In order to improve the accuracy of the parameters needed in the discrete element method (DEM) simulation process of wet-sticky feed raw materials, the JKR contact model in DEM was used to calibrate and verify the physical parameters of wet-sticky feed raw materials. Firstly, the parameters that have a significant effect on the angle of repose were screened using a Plackett–Burman design, and the screened parameters were: MM rolling friction coefficient, MM static friction coefficient, and JKR surface energy. Then, the three screened parameters were selected as the influencing factors and the accumulation angle of repose was selected as evaluating indicator; thus, the performance optimization experiments were carried out with the quadratic orthogonal rotation design. Taking the experimentally measured angle of repose value of 54.25°as the target value, the significance parameters were optimized, and the optimal combination was obtained : MM rolling friction factor was 0.21, MM static friction factor was 0.51, and JKR surface energy was 0.65. Finally, the angle of repose and SPP tests were compared under the calibrated parameters. The results showed that the relative error of experimental and simulated tests in angle of repose was 0.57%, and the compression displacement and compression ratio of the experimental and simulated tests in SPP were 1.01% and 0.95%, respectively, which improved the reliability of the simulated results. The research findings provide a reference basis for simulation study and optimal design of related equipment for feed raw materials.

23 May 2022 in Scientific Reports
Verified
Journal Article
Open access
PDF file
FPFei Peng
Fei Peng
FFFang Fang
Fang Fang
RXRui Xiang
Rui Xiang
DLDan Liu
Dan Liu
Engineering properties are of great importance for Cassia tora L. seeds in aspects of harvesting, handling mechanical design and product processing. The effect of moisture content (7, 10, 13, 16 and 19%) (wet basis) on the properties: physical (length, width, bulk and true density, porosity, thousand seeds mass, coefficient of static friction and angle of repose), mechanical (hardness, fragmentation energy and failure deformations), and thermal (specific heat, thermal conductivity and thermal diffusivity), were systematically studied. As the moisture contents increase from 7 to 19%, the length (L) increased from 4.52 to 5.87 mm, the thickness (T) from 2.51 to 3.21 mm and the width (W) from 2.36 to 3.02 mm, respectively. The bulk and true density of Cassia tora L. seeds decreased from 775.83 to 654.17 kg/m3 and from 1295.21 to 1154.72 kg/m3, respectively, with the moisture content raised from 7 to 19%. The thermal conductivity of Cassia tora L. seeds meal was found to be 0.068–0.098 W m−1 K−1, 0.078–0.112 W m−1 K−1, 0.089–0.125 W m−1 K−1, 0.098–0.136 W m−1 K−1, 0.108–0.148 W m−1 K−1, 0.119–0.159 W m−1 K−1, respectively, at 25 °C, 45 °C, 65 °C, 85 °C, 105 °C and 125 °C in moisture ranges of 7–19%. The thermal diffusivity was found to decrease from 5.21 × 10–8 to 4.53 × 10–8 m2/s, from 5.75 × 10–8 to 4.91 × 10–8 m2/s, from 6.11 × 10–8 to 5.17 × 10–8 m2/s, from 6.52 × 10–8 to 5.36 × 10–8 m2/s, from 7.17 × 10–8 to 5.77 × 10–8 m2/s, from 7.36 × 10–8 to 5.84 × 10–8 m2/s, respectively, at 25 °C, 45 °C, 65 °C, 85 °C, 105 °C and 125 °C in moisture ranges of 7–19%. The results suggested that physical properties exhibited linear relationships with moisture content using the regression model, while mechanical properties showed a second-order polynomial relationship with moisture content. Furthermore, significant variation existed in thermal properties because of differentiate moisture content and temperature. These data and rules are also useful for high efficiency machines design and mechanisms development.

28 February 2022 in Research Square
Verified
Preprint
Open access
PDF file
FPFei Peng
Fei Peng
FFFang Fang
Fang Fang
RXRui Xiang
Rui Xiang
Engineering properties are of great importance for Cassia tora seeds in aspects of harvesting, handling mechanical design and product processing. The effect of moisture content on the physical, mechanical and thermal properties of Cassia seeds was systematically investigated in this study. Specifically, physical properties (length, width, bulk and true density, porosity, thousand seeds mass, coefficient of static friction and angle of repose), mechanical properties (hardness, fragmentation energy and failure deformations), as well as thermal properties(specific heat, thermal conductivity and thermal diffusivity), were systematically studied under five levels of moisture content (7 %, 10 %, 13 %, 16 % and 19 %) (wet basis). As the moisture contents increase from 7 % to 19 % (w.b.), the length (L) increased from 4.52 to 5.87 mm, the thickness (T) from 2.51 to 3.51 mm and the width (W) from 2.36 to 3.02 mm, respectively. The bulk density and true density of Cassia tora seeds decreased from 775.83 to 654.17 kg/m3 and from 1295.21 to 1154.72 kg/m3, respectively, with the moisture content raised from 7% to 19% (w.b.). The thermal conductivity of Cassia tora seeds meal was found to be 0.068- 0.098 W·m-1·K-1, 0.078- 0.112 W·m-1·K-1, 0.089- 0.125 W·m-1·K-1, 0.098- 0.136 W·m-1·K-1, 0.108- 0.148 W·m-1·K-1, 0.119- 0.159 W·m-1·K-1, respectively, at 25 °C, 45 °C, 65 °C, 85 °C, 105 °C and 125 °C in moisture ranges of 7 %- 19 %. The thermal diffusivity was found to decrease from 5.21×10-8 to 4.53×10-8 m2/s, from 5.75×10-8 to 4.91×10-8 m2/s, from 6.11×10-8 to 5.17×10-8 m2/s, from 6.52×10-8 to 5.36×10-8 m2/s, from 7.17×10-8 to 5.77×10-8 m2/s, from 7.36×10-8 to 5.84×10-8 m2/s, respectively, at 25 °C, 45 °C, 65 °C, 85 °C, 105 °C and 125 °C in moisture ranges of 7 %- 19 %. The results suggested that physical properties exhibited linear relationships with moisture content using the regression model, while mechanical properties showed a second-order polynomial relationship with moisture content. Furthermore, significant variation existed in thermal properties because of differentiate moisture content and temperature. These data and rules are also useful for high efficiency machines design and mechanisms development.

11 November 2026 in Scientific Reports
Verified
Journal Article
Open access
PDF file
FPFei Peng
Fei Peng
LHLijun Huang
Lijun Huang
RXRui Xiang
Rui Xiang
HWHaoming Wu
Haoming Wu
Limei ZhangLimei Zhang
Limei Zhang
Starch is the major energy source and natural binder in pelleted feed, and its botanical origin-dependent properties strongly affect feed processing quality. This study aimed to clarify how starch physicochemical properties govern pellet forming performance and to establish machine learning (ML)-based prediction models linking starch characteristics to pellet quality. Eight starch sources (wheat, common corn, waxy corn, potato, sweet potato, manioc, pea, and mung bean) were analyzed for chemical composition, granule morphology, gelatinization, rheological, and thermal properties. Amylose content ranged from 1.05% to 41.27%, and the amylopectin/amylose ratio varied from 0.94 to 74.90. Average particle sizes were 12.92–38.71 μm, and gelatinization temperatures ranged from 69.43 to 89.58 °C. Based on significant differences in gelatinization temperature (a critical processing-related index), four representative starches (wheat, common corn, manioc, and pea) were selected for pelleting trials. Within 10–20% starch addition, pellet density and hardness were 1.32–1.86 g/cm³ and 3.18–3.96 kg, respectively. Higher starch addition significantly increased pellet density and hardness. Low gelatinization temperature facilitated densification, while high amylose favored gel network formation. Five ML algorithms (GBDT, KNN, PLS, RF, and SVR) were evaluated. GBDT performed best for density (R² = 0.93), whereas PLS performed best for hardness (R² = 0.94) and powder content rate (R² = 0.98). SHAP analysis indicated that starch addition was the dominant factor, positively contributing to density and hardness but negatively to powder content rate. This work provides predictive tools for starch source selection and formula optimization in pelleted feed.