Fang Fang

Fang Fang


Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 May 2022 in Scientific Reports
Verified
Journal Article
Open access
PDF file
FPFei Peng
Fei Peng
FFFang Fang
Fang Fang
RXRui Xiang
Rui Xiang
DLDan Liu
Dan Liu
Engineering properties are of great importance for Cassia tora L. seeds in aspects of harvesting, handling mechanical design and product processing. The effect of moisture content (7, 10, 13, 16 and 19%) (wet basis) on the properties: physical (length, width, bulk and true density, porosity, thousand seeds mass, coefficient of static friction and angle of repose), mechanical (hardness, fragmentation energy and failure deformations), and thermal (specific heat, thermal conductivity and thermal diffusivity), were systematically studied. As the moisture contents increase from 7 to 19%, the length (L) increased from 4.52 to 5.87 mm, the thickness (T) from 2.51 to 3.21 mm and the width (W) from 2.36 to 3.02 mm, respectively. The bulk and true density of Cassia tora L. seeds decreased from 775.83 to 654.17 kg/m3 and from 1295.21 to 1154.72 kg/m3, respectively, with the moisture content raised from 7 to 19%. The thermal conductivity of Cassia tora L. seeds meal was found to be 0.068–0.098 W m−1 K−1, 0.078–0.112 W m−1 K−1, 0.089–0.125 W m−1 K−1, 0.098–0.136 W m−1 K−1, 0.108–0.148 W m−1 K−1, 0.119–0.159 W m−1 K−1, respectively, at 25 °C, 45 °C, 65 °C, 85 °C, 105 °C and 125 °C in moisture ranges of 7–19%. The thermal diffusivity was found to decrease from 5.21 × 10–8 to 4.53 × 10–8 m2/s, from 5.75 × 10–8 to 4.91 × 10–8 m2/s, from 6.11 × 10–8 to 5.17 × 10–8 m2/s, from 6.52 × 10–8 to 5.36 × 10–8 m2/s, from 7.17 × 10–8 to 5.77 × 10–8 m2/s, from 7.36 × 10–8 to 5.84 × 10–8 m2/s, respectively, at 25 °C, 45 °C, 65 °C, 85 °C, 105 °C and 125 °C in moisture ranges of 7–19%. The results suggested that physical properties exhibited linear relationships with moisture content using the regression model, while mechanical properties showed a second-order polynomial relationship with moisture content. Furthermore, significant variation existed in thermal properties because of differentiate moisture content and temperature. These data and rules are also useful for high efficiency machines design and mechanisms development.

1 January 2020 in International Journal of Agricultural and Biological Engineering
Verified
Journal Article
Open access
PDF file
FPFei Peng
Fei Peng
ZHZhi-gang Huang
Zhi-gang Huang
FFFang Fang
Fang Fang
In order to explore the mechanical properties and breaking behavior of pellet feed during chewing, the experiments of texture mechanics, followed by the modeling and simulation of pellet feed based on the discrete element method were carried out in this research. Five wet basis moisture contents (8%, 10%, 12%, 14% and 16%, respectively), two kinds of loading directions (L and D direction, respectively) of pig pellet feed were selected as variables. First, mechanical parameters including hardness, elasticity, tackiness and chewiness were measured by a texture analyzer. The results of compression tests showed that the hardness of pig pellet feed was 5.44-32.43 N, the elastic index was 0.04-0.94 mm, the tackiness was 0.07- 6.63 N, the chewiness was 5.52-27.39 mJ. Moreover, the hardness, tackiness and chewiness of pig pellet feed decreased significantly with the increase of moisture content but the elasticity showed an adverse varying trend. The hardness, elasticity, tackiness and chewiness along D direction outweighed that of L direction in numerical data at the same moisture content. Then, the chewing and breaking processes of pellet feed were simulated based on the discrete element method (DEM) combined with bonding particle model, in which the whole pellet feed were considered as agglomerations of micro-particles and broke when the stress between micro-particles had exceeded the maximum limit. Multi-parameter optimization experiments were carried out using quadratic orthogonal rotation design, in which stiffness coefficient (X1), critical stress (X2) and bonding radius (X3) were the influencing factors, hardness (Y1), elasticity (Y2), tackiness (Y3) and chewiness (Y4) were evaluating indicators. Based on the regression analysis of the Design-Expert 8.0.6 software and response surface analysis method, the relationship between the three influencing factors and evaluating indicators was established. The similarity between experimental and simulated results in feed morphology and mechanical index proved that the modeling method for pellet feed based on DEM was effective and accurate. This work can provide a reference for the feed forming process and the optimization design of the related feed machinery. Meanwhile, the DEM model provided a new method for evaluating the texture and palatability of pellet feed. Keywords: discrete element method, pellet feed, texture mechanics, mechanical parameters, palatability DOI: 10.25165/j.ijabe.20201304.5721 Citation: Peng F, Huang Z G, Fang F. Modeling and experiments of chewing mechanical properties of pellet feed using discrete element method. Int J Agric & Biol Eng, 2020; 13(4): 37–44.

1 January 2022 in International Journal of Agricultural and Biological Engineering
Verified
Journal Article
Open access
PDF file
FPFei Peng
Fei Peng
RXRui Xiang
Rui Xiang
FFFang Fang
Fang Fang
DLDan Liu
Dan Liu
Pelleting is the most extensively used thermal processing method in feed industry. In this article, a single pellet press device was developed to investigate the pelleting processing of animal feed. Effects of moisture content (10%-18% w.b.), preheating temperature (60°C-100°C) and maximum compression force (0.2-0.6 kN) on feed pellet were determined and analyzed, as well as energy consumption. The results showed that unit density, pellet hardness and energy consumption were 0.87-2.92 g/cm3, 1.08-4.55 kg, and 3.27-12.66 J/g, respectively. Unit density was found to increase with the increase of preheating temperature and maximum compression force, but decrease with the increase of moisture content. Pellet hardness showed a first ascending then descending trend with the increase of moisture content, but exhibited a positive relationship with both preheating temperature and maximum compression force. Energy consumption increased with the increase of maximum compression force, but exhibited descending trends with the increase of moisture content and preheating temperature. Due to its features of low cost, high efficiency and easy control, the single pellet press device has a wide application prospect in feed processing. Keywords: feed, pelleting, energy consumption, preheating temperature, experiments DOI: 10.25165/j.ijabe.20221504.6155 Citation: Peng F, Xiang R, Fang F, Liu D. Analysis of feed pelleting characteristics based on a single pellet press device. Int J Agric & Biol Eng, 2022; 15(4): 65–70.

1 November 2020 in International Journal of Agricultural and Biological Engineering
Verified
Journal Article
Open access
PDF file
FPFei Peng
Fei Peng
FFFang Fang
Fang Fang
ZHZhi-gang Huang
Zhi-gang Huang
Pilot-scale pellet mill has many advantages and great potential application prospect. In this work, a structure of pilot-scale pellet mill was designed and the effects of moisture content (12%-20% w.b.), temperature (55 degrees C-95 degrees C) and ring die speed (160-320 r/min) on the production and physical properties (pellet durability, bulk density and hardness) of the produced feed pellets were determined and analyzed. The results showed that pellet durability ranged from 90.47% to 96.92%, bulk density 537.4 kg/m(3) to 62.2 kg/m(3), hardness 5.26 kg to 9.65 kg and production 26.51 kg/h to 42.81 kg/h. Pellet durability was found to increase with the increase of temperature and moisture content, but to decrease with the increase of ring die speed. Bulk density showed a monotonic increase with temperature and ring die speed. Hardness increased with the increase of temperature, but exhibited a first ascending and then descending trends with the increase of moisture content. It also indicted that high ring die speed favored production. Due to its fast and cheap production in a suitable scale, the designed pilot scale pellet mill prototype and the comprehensive research would contribute to the production of feed pellets in various processing conditions with different feed formulas, like additive selection and so on, in order to meet diversified demands.