In the paper, a hybrid magnetic fluid is prepared by adding carbon nanotubes to pure ferrofluid to improve its thermal conductivity. Furthermore, an electromagnet is used as magnetic source equipment, and the magnetic field strength in the air gap of the electromagnet is analyzed in theory, simulations, and experiments. A thermal conductivity measurement apparatus for magnetic fluid is established according to the transient hot-wire method. The effects of weight fraction and the length of carbon nanotubes, the external magnetic field strength, and the magnetic field duration time on the thermal conductivity of hybrid magnetic fluid are experimentally investigated. The results show that the thermal conductivity of the hybrid magnetic fluid is significantly improved by adding long carbon nanotubes (10–30 μm), and the thermal conductivity could be enhanced by 23.39% when its weight fraction is 1%. The magnetic field strength (41, 81, 122, 162 mT) and magnetic field duration time have little influence on the thermal conductivity of the hybrid magnetic fluid. The thermal conductivity of the hybrid magnetic fluid has good stability.
Magnetic fluid sealing is a novel sealing technology wherein magnetic fluids play a pivotal role in the sealing process. The yield stress of the magnetic fluid directly affectsits sealing performance and is governed by multiple interdependent factors. Conventional approaches that evaluate the effect of a single parameter while keeping other parameters constant are insufficient to fully characterize the relative contributions of each parameter to the yield stress. In this study, we investigate the preparation factors affecting the yield stress of kerosene-based magnetic fluids and propose a parameter sensitivity analysis method based on orthogonal experimental design to determine the optimal combination of factor levels within the studied range. The sensitivity of key preparation factors affecting the yield stress of kerosene-based magnetic fluids was determined via range and variance analyses of the orthogonal experimental data. The factors, ranked in descending order of sensitivity, were surfactant (C18H34O2) dosage, precipitant (NH3·H2O) dosage, and deionized water (H2O) volume. Moreover, the effects of different levels of the same factor were analyzed using multiple approaches. These findings provide a theoretical foundation for optimizing the preparation of magnetic fluids and enhancing their sealing performance.
1 November 2019 in Journal of Petroleum Science and Engineering