As an important transportation equipment, belt conveyor plays an important role in underground coal mine production and is an indispensable component. In this article, taking the intermediate drive belt conveyor of Shanxi Tongmei Group Tongxin Mine as an example, the continuous dynamic method is adopted to comprehensively consider the non-uniform load distribution of the belt conveyor, and mathematical modeling of the intermediate drive belt conveyor is performed. The dynamic characteristics of the conveyor belt are analyzed. The MATLAB software is used to analyze the change of the conveyor belt tension under different starting accelerations. Based on the analysis results, the starting acceleration is optimized, and the new combined parabolic acceleration curve presented here is more suitable for the actual working condition of the belt conveyor. In this article, the startup timing of the head and middle motors of the belt conveyor is also discussed in depth. The start timing design of the belt conveyor is described, which provides a reference for the design of the belt conveyor with an intermediate drive.
Based on the sealing mechanism of the reciprocating seal, the inverse-hydrodynamic-lubrication (IHL) method was adopted in this study to solve the Reynolds equation, and a multi-field coupled reciprocating seal mixed lubrication numerical model was established. Considering seals used for aircraft actuators as an example, we obtained sealing performance parameters such as leakage and friction at different oil pressures, reciprocating speeds, and temperatures. According to the actual situation, the influence of different working condition parameters on the sealing performance of the reciprocating seal system were analyzed. A reciprocating seal test bench was designed and built, and the friction data for the reciprocating seal system under different working conditions were experimentally obtained. Through a comparative analysis of experimental data and theoretical numerical results, the numerical model and calculation results for reciprocating seal mixed lubrication were verified.
As a basic mechanical component, the sealing ring is widely used in industrial, aerospatial, and other fields. In this study, an elastic metal C-shaped sealing ring with a wave structure was taken as an example, and its performance was analyzed theoretically and measured experimentally. First, an experimental study was performed on the C-ring seal. The proposed method for experimental measurement of the contact stress of the C-ring seal involved innovative use of a universal electronic testing machine and pressure sensitive paper, in conjunction with the hue–saturation–brightness (HSB) method. Based on the discoloration of the pressure sensitive paper after contact stress, computer software was used for analysis, the discoloration was digitized, and the contact stress was established. Second, a theoretical calculation model of the C-ring seal was established using ANSYS software, and a finite element theoretical calculation of the mechanical properties of the sealing ring was established. Finally, the contact stress results were compared with the model calculation results of the C-ring seal. The error between the two was small (4.8%), which proved the validity of the calculation model and the scientificity of the experimental method.
Magnetic fluid sealing is a novel sealing technology wherein magnetic fluids play a pivotal role in the sealing process. The yield stress of the magnetic fluid directly affectsits sealing performance and is governed by multiple interdependent factors. Conventional approaches that evaluate the effect of a single parameter while keeping other parameters constant are insufficient to fully characterize the relative contributions of each parameter to the yield stress. In this study, we investigate the preparation factors affecting the yield stress of kerosene-based magnetic fluids and propose a parameter sensitivity analysis method based on orthogonal experimental design to determine the optimal combination of factor levels within the studied range. The sensitivity of key preparation factors affecting the yield stress of kerosene-based magnetic fluids was determined via range and variance analyses of the orthogonal experimental data. The factors, ranked in descending order of sensitivity, were surfactant (C18H34O2) dosage, precipitant (NH3·H2O) dosage, and deionized water (H2O) volume. Moreover, the effects of different levels of the same factor were analyzed using multiple approaches. These findings provide a theoretical foundation for optimizing the preparation of magnetic fluids and enhancing their sealing performance.
1 October 2018 in IOP Conference Series: Materials Science and Engineering
The development of forward design of contact dynamic seals is an inevitable way to realize the independent development of core key components based on the research results of existing rubber and plastic seals. This paper proposes a multi-index comprehensive evaluation system for sealing performance. Based on the requirements of multiple performance indexes of dynamic sealing systems, a comprehensive evaluation of multiple index functions is constructed to provide a comprehensive evaluation of the performance of rubber and plastic seals. Based on the specific design examples of air contact seals, the design process of a certain seal is explored. Finally, the article elaborates on the future work of the forward design method and its development direction.
1 October 2019 in IOP Conference Series: Materials Science and Engineering
The wave-shaped metal sealing ring is widely used in the aerospace field, whose failure will directly affect the flight safety and even cause major personal accidents and economic losses. The performance optimization problem of the wave-shaped seal is a multi-objective optimization problem, and the multiple targets are affected by the geometric design factors, and are not completely independent of each other. In this paper, for the sealing problem under the severe conditions of aero-engine, the corrugated metal sealing ring is taken as the research object. The W-shaped metal sealing ring is selected as an example, and the finite element model is established by using ANSYS software. Sealing, stability and resilience are chosen as indicators to evaluate the sealing performance. The multi-objective optimization problem is transformed into a single-objective optimization problem by hierarchical solution method, and the sealing structure is parameterized. The optimization results of the geometric parameters of the sealing ring are highly consistent with the product manual of the sealing ring. The correctness and feasibility of the optimization design method based on the analysis of three aspects of performance and the hierarchical solution for dimension reduction are verified.