David Paul Steenson

Dr. David Paul Steenson

orcid

Research Focus & Metrics

Academic Career Length

32Years (1995-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 November 2009 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
MSMuhammad Farhan Shafique
Muhammad Farhan Shafique
KSKashif Saeed
Kashif Saeed
DSDavid Paul Steenson
David Paul Steenson
IRIan D. Robertson
Ian D. Robertson
In this paper, a process for direct laser structuring of microwave circuits in low-temperature co-fired ceramic (LTCC) technology is reported. An efficient alternative to screen printing is proposed for prototyping circuits by laser patterning the conductors on the unfired tape. A line width and gap of 50 ¿m are achieved with laser machining. A range of samples has been studied using a scanning electron microscope in order to optimize the process parameters. The surface roughness of laser-treated samples is measured with a surface profiler and compared with the untreated samples. A method of creating microvias and trenches in thick LTCC substrate is also demonstrated. For 254 ¿m thick green tape, vias with a diameter and separation of 50 ¿ m are realized along with trenches having a width as small as 30 ¿m. The method of optimizing the laser machining process is described in detail. A band-stop mushroom resonator and a microstrip ring resonator filter are fabricated and their results compared against simulations.

10 July 1995 in Physical Review Letters
Verified
Journal Article
Closed access
PDF file
FOF. F. Ouali
F. F. Ouali
NZN. N. Zinov'EV
N. N. Zinov'EV
LCL. J. Challis
L. J. Challis
FSF. W. Sheard
F. W. Sheard
MHMohamed Henini
Mohamed Henini
KSK. R. Strickland
K. R. Strickland
We report the first observations of nonequilibrium phonon-assisted tunneling in a double barrier resonant tunneling device in GaAs. The change in tunnel current produced by the phonons occurs at a bias voltage, which depends on the phonon energy showing that the device has potential as a phonon spectrometer.

5 June 2018 in IEEE Transactions on Components, Packaging and Manufacturing Technology
Verified
Journal Article
Closed access
IOIsibor E. Obuh
Isibor E. Obuh
VDViktor Doychinov
Viktor Doychinov
DSDavid Paul Steenson
David Paul Steenson
PAPrayoot Akkaraekthalin
Prayoot Akkaraekthalin
IRIan D. Robertson
Ian D. Robertson
NSNutapong Somjit
Nutapong Somjit
This paper presents a low-cost microfabrication technique for manufacturing radio frequency microelectromechanical system (RF MEMS) switches and varactors without intensive clean-room environments. The fabrication process entails only laser microstructuring technique, non-clean-room microlithography, and standard wet-bench and hot-film emboss of SU-8 and ADEX polymers. MEMS movable structures were fabricated out of 14-μm-thick aluminum foils and suspended above coplanar-waveguide transmission lines, which were implemented on top of FR4 substrates via 5-μm-thick SU-8 dielectric anchors. Both MEMS structures and an FR4 substrate were integrated using micropatterned polymers, developed by using dry-film ADEX and SU-8 polymers, for a composite assembly. An average fabrication yield of higher than 60% was achieved, calculated from 10 fabrication attempts. The RF measurement results show that the RF MEMS devices fabricated by using the novel microfabrication process have good figures of merit, at much lower overall fabrication costs, as compared to the devices fabricated by conventional clean-room process, enabling it as a very good microfabrication process for cost-effective rapid prototyping of MEMS.

18 June 2025 in Sensors
Verified
Journal Article
Open access
PDF file
HAHarith Al-Safi
Harith Al-Safi
HIHarith Ibrahim
Harith Ibrahim
DSDavid Paul Steenson
David Paul Steenson
Large language models (LLMs) have revolutionized natural language processing (NLP), yet their potential in Internet of Things (IoT) and embedded systems (ESys) applications remains largely unexplored. Traditional IoT interfaces often require specialized knowledge, creating barriers for non-technical users. We present Vega, a modular system that leverages LLMs to enable intuitive, natural language control and interrogation of IoT devices, specifically, a Raspberry Pi (RPi) connected to various sensors, actuators, and devices. Our solution comprises three key components: a physical circuit with input and output devices used to showcase the LLM’s ability to interact with hardware, an RPi integrating a control server, and a web application integrating LLM logic. Users interact with the system through natural language, which the LLM interprets to remotely call appropriate commands for the RPi. The RPi executes these instructions on the physically connected circuit, with outcomes communicated back to the user via LLM-generated responses. The system’s performance is empirically evaluated using a range of task complexities and user scenarios, demonstrating its ability to handle complex and conditional logic without additional coding on the RPi, reducing the need for extensive programming on IoT devices. We showcase the system’s real-world applicability through physical circuit implementation while providing insights into its limitations and potential scalability. Our findings reveal that LLM-driven IoT control can effectively bridge the gap between complex device functionality and user-friendly interaction, and also opens new avenues for creative and intelligent IoT applications. This research offers insights into the design and implementation of LLM-integrated IoT interfaces.

7 May 2025 in Preprints.org
Verified
Preprint
Open access
PDF file
HAHarith Al-Safi
Harith Al-Safi
HIHarith Ibrahim
Harith Ibrahim
DSDavid Paul Steenson
David Paul Steenson
Large language models (LLMs) have revolutionized natural language processing (NLP), yet their potential in Internet of Things (IoT) and embedded systems (ESys) applications remains largely unexplored. Traditional IoT interfaces often require specialized knowledge, creating barriers for non-technical users. We present Vega a modular system that leverages LLMs to enable intuitive, natural language control and interrogation of IoT devices, specifically a Raspberry Pi (RPi) connected to various sensors, actuators and devices. Our solution comprises three key components: a physical circuit with input and output devices, an RPi integrating a control server, and a web application integrating LLM logic. Users interact with the system through natural language, which the LLM interprets to remotely call appropriate commands for the RPi. The RPi executes these instructions on the physically connected circuit, with outcomes communicated back to the user via LLM-generated responses. The system’s performance is empirically evaluated using a range of task complexities and user scenarios, demonstrating its ability to handle complex and conditional logic without additional coding on the RPi reducing the need for extensive programming on IoT devices. We showcase the system’s real-world applicability through physical circuit implementation, while providing insights into its limitations and potential scalability. Our findings reveal that LLM-driven IoT control can effectively bridge the gap between complex device functionality and user-friendly interaction, and also opens new avenues for creative and intelligent IoT applications. This research offers insights into the design and implementation of LLM-integrated IoT interfaces and is showcased in the following link https://youtu.be/CKV__A8G5Rk.

12 October 2018 in IEEE Journal of Selected Topics in Quantum Electronics
Verified
Journal Article
Open access
BRBilly D. O. Richards
Billy D. O. Richards
ABArtitsupa Boontan
Artitsupa Boontan
TMThomas Mann
Thomas Mann
EKEric Kumi-Barimah
Eric Kumi-Barimah
CRChristopher Russell
Christopher Russell
Gin JoseGin Jose
Gin Jose
Thin glass films have been produced by implanting $\rm Tm^{3+}$ doped and $\rm Tm^{3+}/Er^{3+}$ codoped tellurite glasses into silica substrates using ultrafast laser plasma doping for the first time. The resulting glass films had thicknesses of up to 2 μm, refractive indices of 1.5 - 1.65 and exhibited photoluminscence in the 1.5 - 2.1 μm wavelength region when excited with 808 nm and 976 nm laser diodes. The $\rm OH^-$ content of the silica glass substrate was also found to have an effect on the $\rm Tm^{3+}$ : $^3\rm F_4$ photoluminescence lifetime in the modified thin glass film layer, with the high $\rm OH^-$ containing substrate exhibiting a shorter lifetime. Through optimisation of the femtosecond laser ablation parameters, we have produced crack-free thin films of $\rm Tm^{3+}$ doped tellurite-modified silica glass layers with good thickness uniformities of ±10 nm, and the refractive index of the modified layer is up to 13% higher than the bare substrate material.