Nickel-nanoparticle-containing polyimide composite films were prepared by liquid-phase reduction of Ni2+ ions with potassium borohydride (KBH4). This preparation method could be repeated to increase the number of the nanoparticles in the films.
21 November 2025 in Environmental Science & Technology
Bacteria reduce toxic selenium oxyanions, such as selenite, to elemental selenium (Se0), forming selenium nanoparticles (SeNPs) either intracellularly or extracellularly. However, the mechanism through which extracellular SeNPs (Ex-SeNPs) are exported remains unclear. In this study, we characterized Ex-SeNPs biosynthesized by Escherichia coli during the aerobic reduction of selenite. The SeNPs appeared within 2 h of exposure, remained extracellular, and displayed a consistent spherical morphology (∼100 nm). Purified Ex-SeNPs consisted of an Se0 core enveloped by a membrane-like layer containing lipids, proteins, carbohydrates, peptidoglycan, and lipopolysaccharides. Fluorescence microscopy and gas chromatography-mass spectrometry indicated that the encapsulated membrane originates from the E. coli cell membrane. Notably, mutants deficient in the outer membrane proteins OmpC or TolA failed to excrete SeNPs, resulting in intracellular accumulation despite efficient Se0 synthesis. Our findings suggest that E. coli forms SeNPs intracellularly and exports them via an envelope-dependent process, during which the particles may become encapsulated in membrane-like structures. These findings help clarify the mechanism underlying a membrane-dependent pathway for SeNP detoxification and export that had been suggested but not directly demonstrated.
Compton scattering imaging with intense, high-energy synchrotron X-rays allows us to visualize a light element substance in an operating electrochemical device. In this paper, we report the first experiment of Compton scattering imaging (CSI) on an operating polymer electrolyte fuel cell (PEFC). The novelty of the CSI technique is a non-destructive direct observation of cross-sectional images with a sensitivity to light elements and a capability of simultaneous measurements with fluorescent X-rays of heavy elements. Analyses of the observed images provide the cross-sectional distribution of generated liquid water and its current density dependency. The results show that the amount of generated water increases in the vicinity of the cathode catalyst layer at current densities ranging from 100 to 500 mA/cm2, while it remains constant or slightly decreases from 500 to 900 mA/cm2. In both the gas diffusion layer and the channel, liquid water is observed near the channel and rib interface above 500 mA/cm2, indicating the formation of a liquid water flow path. In addition, simultaneous measurements of fluorescent Pt-Ka X-rays reveal a significant correlation between the generated liquid water and Pt catalysts, using the Pearson correlation coefficient. The result shows that water is dispersed in the catalyst layer without any correlation with the amount of Pt catalysts at low current densities, but water tends to be distributed in the Pt-rich areas at high current densities. This study demonstrates that Compton scattering imaging is one of the unique techniques to characterize the behavior of generated liquid water in an operating PEFC.
8 November 2023 in JOURNAL OF CHEMICAL ENGINEERING OF JAPAN
The electrorheological (ER) properties of composite materials consisting of a nematic liquid crystal (LC) and gold nanoparticles (GNPs) coated with bistolane-based mesogenic groups were studied. The GNPs were coated by normal alkyl chains and the fluorescent LC compounds, of which the molecular structure was similar to that of the LC matrix. The dispersity of the GNPs in the nematic LC was investigated by polarizing optical microscopy (POM). In order to improve the ER effect of the composite, a simple strategy was investigated from the viewpoint of a material design in surface-modified GNPs by lateral substitution of the mesogenic groups. The presence of the GNPs in the nematic LC led to a slightly enhanced ER effect compared to that observed for only the nematic LC. This study demonstrates the potential of a hybrid system consisting of LCs and GNPs to yield a larger ER effect.
1 July 2020 in Journal of Nanoscience and Nanotechnology
Disk-shaped tungsten(VI) oxide (D-WO3) particles were synthesized according to a previously reported method consisting of pyrolysis, precipitation, and calcination, and the calcination temperature was changed (200–600 °C). The samples were characterized by field-emission scanning electron microscopy, transmission electron microscopy, powder X-ray diffraction, the Brunauer– Emmett–Teller single-point method, and diffuse reflectance spectroscopy. In addition, to evaluate the photocatalytic activities of the samples, the mineralization of acetic acid to carbon dioxide (CO2) was measured by loading Pt particles onto the surface of the samples by photodeposition and irradiating them in an aqueous suspension with a blue light-emitting diode. Increasing the calcination temperature was associated with several changes: the crystallites grew larger, increasing the crystallinity; the specific surface area decreased, decreasing the adsorption capacity; and the rate of the photocatalytic CO2 evolution reaction increased. Pt-loaded (0.1 wt%) D-WO3 calcined at 600 °C showed the highest activity with a CO2 evolution rate of 5.9 μmol h−1. These results indicated that improving the crystallinity of the D-WO3 samples was effective in increasing their photocatalytic activities.