Sand screenout is a critical challenge in hydraulic fracturing, affecting both the construction process and operational safety. This paper proposes a sand screenout warning model that integrates a combinatorial neural network and physical approaches to enhance both the speed and accuracy of sand screenout warnings. Firstly, the combined neural network uses a Transformer to capture key features during fracturing construction from historical data, and the extracted features are input to the Gated Recurrent Unit (GRU) for temporal prediction and the Crested Porcupine Optimizer (CPO) to further optimise the GRU-Transformer hyperparameters of the model. Additionally, the physical model improves the conventional inverse slope method by incorporating a threshold and sliding module, which enhances slope calculation and warning accuracy. The results showed that for fracturing pressure prediction, the proposed CPO-GRU-Transformer model obtained an RMSE value of 0.842 MPa, MAE of 0.613 Mpa, and of 0.971, a smaller RMSE and MAE and a larger than the three pressure prediction models, namely LSTM, GRU, and CPO-GRU. The proposed sand screenout warning model has been applied in the field construction of the U shale gas area in the Sichuan Basin. The warning points of the model proposed in this study were advanced by 73.5 s on average compared with the manual warning points in the three validated fracturing segments, with a successful warning rate of 85.71%, which greatly avoids the possibility of sand screenout and provides a method of fast calculation speed and high prediction accuracy, providing an early warning of sand screenout.
Accurate prediction of fracturing pressure is critical for operational safety and fracturing efficiency in unconventional reservoirs. Traditional physics-based models and existing deep learning architectures often struggle to capture the intense fluctuations and complex temporal dependencies observed in actual fracturing operations. To address these challenges, this paper proposes a multi-source data-driven fracturing pressure prediction model, a model integrating TCN-BiLSTM-Attention Mechanism (Temporal Convolutional Network, Bidirectional Long Short-Term Memory, Attention Mechanism), and introduces a feature selection mechanism for fracture pressure prediction. This model employs TCN to extract multi-scale local fluctuation features, BiLSTM to capture long-term dependencies, and Attention to adaptively adjust feature weights. A two-stage feature selection strategy combining correlation analysis and ablation experiments effectively eliminates redundant features and enhances model robustness. Field data from the Sichuan Basin were used for model validation. Results demonstrate that our method significantly outperforms baseline models (LSTM, BiLSTM, and TCN-BiLSTM) in mean absolute error (MAE), root mean square error (RMSE), and coefficient of determination (R2), particularly under high-fluctuation conditions. When integrated with slope reversal analysis, it achieves sand blockage warnings up to 41 s in advance, offering substantial potential for real-time decision support in fracturing operations.
Lost Circulation (LC) is one of the most common and high-risk complex situations encountered during drilling operations, posing a serious threat to the safe extraction and economic viability of oil and gas resources. Traditional wellbore leakage detection methods based on human experience often suffer from delays and uncertainties, making it difficult to meet real-time warning requirements under complex geological conditions. This paper proposes an LC warning method that combines a physical model with a combination of neural networks (Crested Porcupine Optimizer (CPO)–Long Short-Term Memory (LSTM)–Random Forest (RF)). The physical model utilises changes in mud pit volume, inlet–outlet flow rate differences, and riser pressure to construct interpretable event labels, thereby enhancing the physical plausibility of prediction results. The deep learning component employs LSTM networks to extract temporal features and RF for non-linear discrimination and introduces the CPO algorithm for feature selection and hyperparameter optimisation, thereby enhancing the model’s stability and generalisation capability. Validation using actual field data from the western Bohai Bay oilfield demonstrates that the proposed method outperforms traditional models in accuracy, precision, recall, and F1-score. It also offers a significant improvement in early warning time, detecting potential leakage about 17 min before traditional methods. These results highlight the effectiveness of the approach in managing risks during drilling operations.
Point-the-bit rotary steerable systems (RSSs) achieve trajectory build-up through the coupled action of internal steering offset, bit attitude change, bottom hole assembly (BHA) flexure, and nonlinear wellbore interaction. Unlike conventional rigid or quasi-static BUR models, this study developed a 3D dynamic finite element model for point-the-bit RSS. The drill string was discretized using Euler–Bernoulli beam elements, with an equivalent “hinge-deflection angle” constraint introduced at the steering unit. Relative angle loading was imposed using the penalty function method, with nonlinear boundary conditions (bit–formation interaction and borehole friction) coupled into the model. Based on the established model, the effects of deflection angle, weight on bit (WOB), and rotary speed were systematically quantified. The results show that when the deflection angle increases from 0.5° to 1.5°, the average BUR rises from 1.452°/30 m to 4.251°/30 m; when the WOB increases from 60 kN to 100 kN, the average BUR increases from 2.281°/30 m to 2.814°/30 m. Within the range of 50–90 r/min, rotary speed has a limited effect on the average BUR, but it can alter the characteristics of transient fluctuations. This approach provides a robust theoretical basis for BUR evaluation, parameter optimization, and control strategy design for rotary steerable tools.
To accurately predict the rate of penetration (ROP) for steeply inclined coal seam blocks, this paper proposes a data-driven ROP prediction method incorporating feature processing. First, Savitzky–Golay (SG) filtering is applied to key continuous monitoring parameters to mitigate the impact of noise on model training. Subsequently, features are comprehensively screened across linear, monotonic, and nonlinear dependency dimensions using the Pearson correlation coefficient, Spearman correlation coefficient, and mutual information evaluation, identifying structural parameters significantly contributing to ROP. Based on this, a Time Convolution Network (TCN)-Bidirectional Long Short-Term Memory (BiLSTM)-Attention prediction model is constructed: TCN extracts local temporal patterns, BiLSTM captures forward and backward dependencies, and the attention mechanism adapts weight distribution for information across different time steps. This architecture significantly enhances the model’s ability to capture complex operational variations and improves prediction accuracy. Experimental results demonstrate that compared to benchmark models such as BiLSTM, TCN-BiLSTM, and BiLSTM-Attention, our method achieves superior performance across all evaluation metrics and exhibits strong generalization capabilities on diverse operational datasets.