In the air and ground transportation sectors, new environmental regulations and societal concerns have triggered a search for new products and processes that complement resources and the environment. To address these issues, this article reports on current R&D efforts to develop bio-sourced materials by an international joint project. Novel bio-sourced epoxies and biocomposites were developed, characterized, modified and evaluated in terms of the mechanical property levels. Quasi-structural composite parts were finally trial-manufactured and demonstrated.
A high temperature epoxy resin was formulated by using a rosin-sourced anhydride-type curing agent, i.e., maleopimaric acid (RAM), and a two-component epoxy consisting of an E51-type epoxy and a solid phenolic epoxy to form a bio-sourced green matrix resin. The glass transition temperature of the final resin was 238 °C Carbon fiber composite prepreg and was manufactured and laminated into composite specimens. Interleaving Toughening Technology (ITT) was applied to the laminates by using Polyamide interleaf veils. The interlaminar fracture toughness and compression after impact (CAI) strength were investigated and showed that the opening Mode I interlaminar fracture toughness GIC and the Mode II interlaminar fracture toughness GIIC of the specimens with interleaves were significantly improved from 227.51 J/m2 to 509.22 J/m2 and 1064.3 J/m2 to 1510.8 J/m2, respectively. Correspondingly, the drop-weight impact test shows that the interleaves reduced the impact damage area from 20.9% to 11.3% of the total area, and the CAI residual strength was increased from 144 MPa to 191 MPa. Meanwhile, mechanical tests showed that the in-plane properties of the interleaved laminates were slightly reduced due to carbon fiber volume fraction reduction. In conclusion, the high glass transition temperature, fracture toughness and CAI behaviour make the green resin matrix composite a potential candidate for aerospace applications.
A multi-functional modifier, which could improve the mechanical and thermal performance simultaneously, is significant in composites production. Herein, inspired by the chemistry of mussel, an interfacial modifier named FPD was designed and synthesized through one simple step, which was attached by three functional groups (including catechol, N-H bond, and DOPO). Due to the innate properties of each functional group, FPD played multiple roles: adhere to the ramie fibers from catechol and cure with the epoxy resin from -NH-, an antiflaming property from DOPO, and the compatibilizer between ramie fibers and epoxy resin was also improved by changing the polarity of ramie fiber. All of the above functions can be proved by means of water contact angle (WCA), atomic force microscope (AFM), and scanning electron microscopy (SEM), etc. After solidification, the ramie fiber/epoxy composites demonstrated superior performances in terms of good mechanical properties and excellent flame retardant property. With the addition of 30 wt.% FPD, the tensile strength and modulus of the ramie/epoxy composite showed an improvement of 37.1% and 60.9%, and flexural strength and modulus of the composite were improved by 8.9% and 19.3% comparing with no addition composite. Moreover, the composite could achieve the goal for V-0 rating in the UL-94 test and LOI value was 34.6% when the addition of FPD reached 30 wt.%. This work provided us with an efficient method for fabricating nature fiber/epoxy composites with good properties.
14 August 2025 in Journal of Materials Chemistry A
Epoxy resins with covalent bond cross-linked networks have high strength and are widely used in many fields, but how to endow epoxy resins with recyclability and multifunctionality while achieving balanced integration of high strength and toughness will be a significant challenge. In this work, through molecular engineering, a VA hardener with a hydrogen-bonding site and a VM hardener without a hydrogen-bonding site were synthesized by the reaction of 4-imidazolecarboxaldehyde with two diamines, respectively. The two hardeners were mixed according to a certain ratio and then reacted with flexible epoxy monomers, and a new supramolecular epoxy network composed of dynamic covalent bonds (imine bonds) and adjustable dynamic noncovalent bonds (hydrogen bonds and metal-coordination bonds) was built by the addition of Zn2+. This unique dynamic network achieves a strength-toughness trade-off, including a tensile strength of 54 MPa, an elongation at break of 22.3%, and a toughness of 8.96 MJ m−3, with a shape-memory function triggered by temperature. Surprisingly, all specimens exhibit clustering-triggered emission (CTE), displaying fluorescence under ultraviolet (UV) light, with the mechanism being illustrated using density functional theory (DFT). Finally, the integration of dynamic imine bonds enables closed-loop recycling and reprocessing of the specimen. This study develops a multifunctional supramolecular epoxy system that harmonizes mechanical robustness, stimuli-responsiveness (shape memory/fluorescence), and circular lifecycle capabilities, contributing to the advancement of sustainable polymer design paradigms.
In this concept-proof study, a preform-based RTM (Resin Transfer Molding) process is presented that is characterized by first pre-loading the solid curing agent onto the preform, and then injecting the liquid nonreactive resin with an intrinsically low viscosity into the mold to infiltrate and wet the pre-loaded preform. The separation of resin and hardener helped to process inherently high viscosity resins in a convenient way. Rosin-sourced, anhydrite-cured epoxies that would normally be regarded as unsuited to liquid composite molding, were thus processed. Rheological tests revealed that by separating the anhydrite curing agent from a formulated RTM resin system, the remaining epoxy liquid had its flowtime extended. C-scan and glass transition temperature tests showed that the preform pre-loaded with anhydrite was fully infiltrated and wetted by the liquid epoxy, and the two components were diffused and dissolved with each other, and finally, well reacted and cured. Composite laminates made via this approach exhibited roughly comparable quality and mechanical properties with prepreg controls via autoclave or compression molding, respectively. These findings were verified for both carbon and ramie fiber composites.
1 January 2024 in Science and Engineering of Composite Materials
Fiber reinforced polymer (FRP) have the advantages of high strength, corrosion resistance, and low density, which are widely used to serve as tray products in bolt support systems. As a key component, the low mechanical load-bearing capacity of trays significantly limits their widespread application. Besides, there is no corresponding theoretical calculations and strength analysis methods for the structural design. The aim of this study is to optimize the tray structure and improve its load-bearing capacity. Through theoretical calculations and finite element numerical analysis, the effect of inner surface taper and stiffener height on the load-bearing capacity of the tray under the application of constant axial force is investigated. The results show that first of all, the larger the inner surface taper is, the better the load capacity of the tray. Second, the special-shaped truncated cone type displayed better load capacity than the stiffener tray. Third, the higher the design height of the stiffener is, the smaller the deformation and shear stress on the top of the inner surface of the tray, and better load capacity is achieved. We believe that this study provides theoretical guidance for the structural design of high-performance FRP trays.