Sviatoslav Yutskevych

Prof. Sviatoslav Yutskevych

orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 March 2025 in Coatings
Verified
Journal Article
Open access
PDF file
VZVadim Zakiev
Vadim Zakiev
VNVolodymyr Nadtoka
Volodymyr Nadtoka
IZIslam Zakiev
Islam Zakiev
BMBohdan N. Mordyuk
Bohdan N. Mordyuk
OYOleksandr Yakushenko
Oleksandr Yakushenko
SYSviatoslav Yutskevych
Sviatoslav Yutskevych
The aim of the study is a comparative analysis of micromechanical and microtribological properties of the cathodic arc-deposited Mo, Cr, and Ta coatings using nanoindentation and scratch test techniques as well as a microtribological dry sliding test with wear tracks post-examination and worn volume determination using interference profilometry. A new scratch test technique based on the statistical processing of registered sclerograms during a multi-pass scratch test well adopted for the scratch resistance assessment of rough surfaces is suggested. New approaches to microtribological testing based on the indentation tester equipped with an additional precision rotational stage are proposed, which could fill the gap between macro- and nano-scale. X-ray diffraction analysis reveals the structure of the studied coatings and phase compositions of the coating-substrate interface.

1 August 2017 in International Journal of Fatigue
Verified
Journal Article
Closed access
SIS. Ignatovich
S. Ignatovich
MKM. Karuskevich
M. Karuskevich
SYSviatoslav Yutskevych
Sviatoslav Yutskevych

1 September 2020
Verified
Conference Paper
Closed access
OKOlena Kozhokhina
Olena Kozhokhina
SYSviatoslav Yutskevych
Sviatoslav Yutskevych
OROleksandr Radchenko
Oleksandr Radchenko
VGViktor Gribov
Viktor Gribov
OCOleksii Chuzha
Oleksii Chuzha
Prevention of degradation processes and prediction of lifetime of aircraft structure is essential for keeping high-reliability level and aviation safety. Research has shown that it is necessary to have significant statistics of the tested specimens to describe such a complicated process as metal fatigue. This paper aims to process statistical data for two-stage fatigue tests. Based on a review of the literature and experimental statistics, analytical models of the rate of degradation processes were highlighted. On this basis, it is recommended to study the evolutionary process of fatigue behaviour. Two-stage fatigue tests of technically pure copper were carried out in the statistical aspect. Above 200 specimens were tested to obtain an nl-n2 diagram. Oscillation of physical-mechanical characteristics the metal has occurred that it leads to the data significant scattering. Probability density functions f(n1, n2) for experiment results was obtained. Further research is needed for probability distribution fitting and more accurate selection of bivariate distribution.

8 December 2021 in Fatigue & Fracture of Engineering Materials & Structures
Verified
Journal Article
Closed access
PDF file
IGIevgen Gavrylov
Ievgen Gavrylov
MKMikhail Karuskevich
Mikhail Karuskevich
SISergey Ignatovich
Sergey Ignatovich
SYSviatoslav Yutskevych
Sviatoslav Yutskevych
TMTetiana Maslak
Tetiana Maslak

26 August 2026 in Aerospace technic and technology
Verified
Journal Article
Open access
PDF file
SISergii Ignatovych
Sergii Ignatovych
IDIryna Dzhavadova
Iryna Dzhavadova
SYSviatoslav Yutskevych
Sviatoslav Yutskevych
This paper reviews the primary approaches to assessing the plastic zone formed in the vicinity of a fatigue crack tip, and analyses how this is considered in fatigue life calculations for aircraft structures. This topic is relevant because most airframe components experience high-cycle, variable-amplitude loading, and the presence of cracks or stress concentrators can induce local plastic deformation even at relatively low nominal stress levels. Within the framework of linear elastic fracture mechanics (LEFM), stresses exhibit a singularity at the crack tip; that is, they increase infinitely as the crack tip is approached. In real structural materials, however, such an increase is limited by reaching the yield strength, resulting in the formation of a plastic zone. The size and shape of this zone affect the validity of applying LEFM parameters. The paper analyzes the stress state near the crack tip, the role of the stress intensity factor (SIF), and the conditions for the onset of plastic deformation according to the Mises and Tresca criteria. It also considers the differences between plane stress and plane strain states. Particular focus is given to the classical analytical models of Irwin, Leonov–Panasyuk–Dugdale and their modifications. The analysis includes experimental and numerical methods for refining the plastic zone, such as microhardness measurements, metallographic etching, digital image correlation (DIC), and the finite element method (FEM). The influence of the plastic zone on fatigue crack growth is considered, including the distinction between monotonic and cyclic plastic zones, plasticity-induced crack closure, and the effects of overload, underload, and load interaction in a loading spectrum. Approaches that account for the effects of local plastic deformation both at the crack tip and in the crack wake are critically evaluated, including the Wheeler, Willenborg, Generalized Willenborg, Modified Generalized Willenborg, Hsu, FASTRAN and strip-yield models. The inclusion of the plastic zone in regulatory and reference documents is also discussed. It is demonstrated that the Irwin plastic zone correction method is the most widely used approach in engineering practice for accounting for the plastic zone. It is also established that plastic zone assessment is an important component of analysing the fatigue life and residual strength of aircraft structures. This makes it possible to determine the limits of LEFM applicability, justify the selection of appropriate calculation model, account for the influence of load history and improve the reliability of durability prediction for cracked structural elements.

29 August 2024 in Aerospace technic and technology
Verified
Journal Article
Open access
PDF file
IGIevgen Gavrylov
Ievgen Gavrylov
YVYurii Vlasenko
Yurii Vlasenko
SYSviatoslav Yutskevych
Sviatoslav Yutskevych
OYOleksandr Yakobchuk
Oleksandr Yakobchuk
OKOleg Karuskevych
Oleg Karuskevych
This article presents the results of a study on the factors determining the effect of film-forming anticorrosive compounds on the fatigue of riveted joints. Anti-corrosion compounds recommended for protecting the structure of transport category aircraft, based on the experience of their use by well-known developers of aviation equipment, were studied. Two treatment variants with film-forming anticorrosive compounds were considered, defined as: a) "excessive amount of compound" and b) "limited amount of compound". An excessive amount of compound in the joint gap caused a negative effect on fatigue life. The relationship between the viscosity of the studied compounds and the number of loading cycles to failure under the "excessive" processing mode was experimentally revealed, which can be explained by the penetration of compounds into joint gaps. Using an original device for studying the friction forces between joint elements in the presence of anticorrosive compounds, the static friction coefficient was determined using several anticorrosive materials. The results of determining the coefficients of static friction indicate that anticorrosive materials have a significant effect on the forces of static friction (friction at rest) and the necessity to select them based on a set of characteristics. It has been established that the thickness of the compound layer does not affect the value of static friction. The primary factor in determining the effect of compounds on friction and the corresponding decrease in cyclic durability is the fraction of the surface covered with a lubricating layer, which determines one of the possible friction modes: boundary, dry, or mixed. It has been experimentally established that the resting friction force increases with the duration of the interval between the application of anticorrosive compounds and testing. The effect of compressive forces on friction in the joints was also investigated. Finite-element modeling of the formation of a riveted joint was carried out, considering the plastic deformation of the rivet material. Based on the obtained results, a conclusion was drawn about the local nature of the contact interaction between the plates, which was concentrated exclusively in the hole zone. The finite element analysis and numerical experiments led to an important conclusion: the local stresses in the hole zone that determine the durability significantly depend on the coefficient of static friction between the skin sheets.