Growing global demand and utilization of fossil fuels has elevated wealth creation, increased adverse impacts of climate change from greenhouse gases (GHGs) emissions, and endangered public health. In most developing countries, biomass wastes, which include but are not limited to agricultural residues, are produced in large quantities annually. They are either inefficiently used or disposed of indiscriminately, which threatens the environment. It is possible to convert these wastes, through densification, into high-density and energy-efficient briquettes. Densification of biomass into briquettes presents a renewable energy option as an alternative to fossil fuels. This paper reviews biomass briquetting with reference to biomass resources, feedstock pre-processing, briquetting process parameters, briquetting technology, and briquettes quality evaluation parameters. The review also includes the economic aspect of briquetting relating to costs and feasibility.

In the last few decades, microplastics (MPs) have been among the emerging environmental pollutants that have received serious attention from scientists and the general population due to their wide range of potentially harmful effects on living organisms. MPs may originate from primary sources (micro-sized plastics manufactured on purpose) and secondary sources (breakdown of large plastic items through physical, chemical, and biological processes). Consequently, serious concerns are escalating because MPs can be easily disseminated and contaminate environments, including terrestrial, air, groundwater, marine, and freshwater systems. Furthermore, an exposure to even low doses of MPs during the early developmental stage may induce long-term health effects, even later in life. Accordingly, this study aims to gather the current evidence regarding the effects of MPs exposure on vital body systems, including the digestive, reproductive, central nervous, immune, and circulatory systems, during the early developmental stage. In addition, this study provides essential information about the possible emergence of various diseases later in life (i.e., adulthood).

The objective of this research was to investigate the quality of hybrid briquettes developed from corncobs (CC) and oil palm trunk bark (OPTB) under a low-pressure densification technique. The materials were combined in varying ratios of CC to OPTB (100:0, 75:25, 50:50, 25:75, 0:100) and wastepaper pulp (10% by weight) was added to each mixture as a binder. The briquettes were produced using a manually operated 20-tonne hydraulic piston press at 28 °C temperature and ≤7 MPa compaction pressure. The mechanical strength of the briquettes was determined by the drop test and compression test methods, while a bomb calorimeter was used to determine the calorific values. The results showed that the physical properties of hybrid briquettes ranged from 9.24–10.00% moisture content, 0.38–0.40 g/cm³ density, and 87.60%–92.00% water resistance. Mechanical strength showed a 98.28%–99.08% shatter index and 18.47–21.75 MPa compressive strength, while calorific values ranged from 16.54–16.91 MJ/kg. The hybrid briquettes fared better than the CC briquettes. The significance of this study lies in the production of briquettes with suitable physical, mechanical and thermal properties by utilizing OPTB which have hitherto not been used, mixed with corncobs. This could bring substantial environmental and socio-economic benefits to rural communities of the developing countries.

The outbreak of a neurological disorder was first discovered as a new coronavirus (2019-nCoV) in Wuhan, China. The infection spread rapidly in China and throughout the world, including Malaysia. Malaysia recorded its initial case on 25 January 2020 with intensifying numbers since March 2020. Due to this uncertain circumstance, Malaysia has introduced the Movement Control Order (MCO) with the main aim of isolating the source of the COVID-19 outbreak, which was effective from 18 March 2020. The restriction has observed fewer vehicles on the road with industrial and commercial activities being suspended. The objective of the study is to quantify the effects of MCO to food waste generation in town and district areas of Klang Valley, Malaysia. Food waste generation data was derived from the Project Delivery Department, KDEB Waste Management on a daily basis before (19 February–17 March 2020) and during the MCO (18 March–14 April 2020) at 12 local authorities in Selangor, Malaysia. The data was obtained with the limitation of assumption that there is no waste compositional analysis to be conducted in 2020. Despite the stay-at-home order, food waste data showed a descriptive reduction of up to 15.1% during the MCO. Statistical analysis of food waste generation from one-way variance has shown that municipal and district local authorities recorded a significant reduction (p < 0.50) during the MCO. The food waste reduction during the MCO will deliver as the evidence-based results to push the need for policies in Malaysia as per the goals outlined in Sustainable Development Goals of global food loss and waste.

The global waste generation keeps increasing over the years and it requires innovative solutions to minimize its impacts on environmental quality and public health. A strategic plan must be ascertained to overcome the future challenges of Municipal solid waste (MSW) locally and globally. Universiti Putra Malaysia (UPM) coined an initiative to demonstrate a showcase pilot plant for green energy production from MSW. The data was obtained from the survey and actual sampling within the UPM compound shows that UPM has generated 5.0–7.0 t/d of MSW generated consist of 30–35% organic fraction. Restaurants are the main source of the organic fraction. Upon separation, the organic fractions were digested into biogas. At a maximum conversion of the organic fraction, 715 kWh of electricity might be generated from the 2.2 t/d of organic waste generated in UPM. In this study, organic components from UPM were proposed to be subsequently used as a substrate via anaerobic digestion to produce green energy in the form of electricity or flammable fuels.

Improper handling of household solid waste causes problems that affect public health and the environment, as well as the aesthetic nature of cities. This paper aims to determine if the theory of planned behavior (TPB), and its extended version can be used to predict household recycling intention (RI), and whether perceived lack of facilitating conditions have a moderating role on households’ RI in Nigeria. Data from a sample of 393 households from Kano metropolis Nigeria were analyzed using structural equation modeling. The result reveals that the TPB Model predicts households RI in Nigeria and explains 42% of the variance in RI. Attitude is the most important predictor of RI in the TPB model (β = 0.593, p = 0.000). However, after personal norm (PN) was added into the model, the variance in RI increases to 58% and PN becomes the most important predictor of RI in the extended TPB model (β = 0.496, p = 0.000). Perceived lack of facilitating condition was found to have a significant moderating effect on households’ RI. Finally, our findings show that providing households with recycling facilities and local collections holds great promise for improving households’ intention to recycle.