Indira Tashmukhanbetova

Dr. Indira Tashmukhanbetova

School of Architecture, International Educational Corporation, Almaty, Kazakhstan
orcid
Open to research collaboration and peer reviewing.

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 April 2025 in Ceramics
Verified
Journal Article
Open access
PDF file
AKAidana Kuanyshbay
Aidana Kuanyshbay
SNSAYAT NIYETBAY
SAYAT NIYETBAY
Indira TashmukhanbetovaIndira Tashmukhanbetova
Indira Tashmukhanbetova
RSRuslanzhan Sadyrov
Ruslanzhan Sadyrov
NANurgul Amangeldi
Nurgul Amangeldi
AYAssel Yesbolat
Assel Yesbolat
This study explores the optimization of foam ceramic materials through experimental research and mathematical modeling. The goal was to enhance mechanical strength, thermal insulation, porosity, water absorption, and density by adjusting composition and firing conditions. Regression analysis and response surface methodology were used to assess the effects of loam, fly ash content, and the firing temperature. The optimal composition of 60–65% loam, 10% fly ash, and a firing temperature of 950–1000 °C yielded foam ceramics with a bulk density of 680–700 kg/m3, a compressive strength of 3.5–4 MPa, and a thermal conductivity of 0.135–0.140 W/(m·K). Controlled porosity (70–72%) enhanced insulation while maintaining structural integrity. X-ray diffraction confirmed mullite, quartz, and cristobalite phases, with mullite improving mechanical properties. This research demonstrates the potential of optimized foam ceramics for energy-efficient construction. Mathematical modeling and experimental validation provide a pathway for developing lightweight, high-performance ceramic materials. Future work should refine sintering processes, explore new additives, and evaluate the long-term performance.

15 March 2022 in Kompleksnoe Ispolzovanie Mineralnogo Syra = Complex Use of Mineral Resources
Verified
Journal Article
Closed access
L"Limited Liability Partnership "
Limited Liability Partnership "
Indira TashmukhanbetovaIndira Tashmukhanbetova
Indira Tashmukhanbetova
ICInternational Educational Corporation"
International Educational Corporation"
VSV. Selyaev
V. Selyaev
NUN.P. Ogarev Mordovian State University
N.P. Ogarev Mordovian State University
L"Limited Liability Partnership "SAVENERG
Limited Liability Partnership "SAVENERG
The article discusses experimental studies of the size and shape of structured particles of microsilica small angle x-ray scattering method and a photophonon theoretical description of the heat transfer process in complex heterogeneous structures to assessment of the structural characteristics of granular systems for the properties of thermal insulating materials. The mechanism of heat transfer in granular, porous systems is quite complex, since heat exchange occurs in a material consisting of two phases (solid and gas) and at the phase boundary. Heat transfer in liquid thermal insulation coatings can be carried out from one solid particle to another. In this case, the thermal conductivity will depend on: the chemical and elemental composition of the material; particle granulometry; surface topology - the presence of inhomogeneities, defects on the surface; the number of touches and the contact area between the particles. The heat transfer of gas in the pores is carried out when gas molecules collide. Thermal conductivity will be determined by the ratio of the free path of molecules and linear pore sizes, temperature and dynamic viscosity of the gas phase, the nature of the interaction of gas molecules with the solid phase. Heat transfer by radiation depends on the nature of the particles, the dielectric, magnetic permeability and the degree of blackness of the particle surface. Based on the analysis of possible mechanisms of heat transfer in granular systems, it can be argued that the effective thermal conductivity of the system depends, all other things being equal, on the structure of the pore space of granular materials, topology and the number of particle touches. Considering idealized models of the structure of granular materials in the form of ordered folds of perfectly smooth balls, we can obtain several variants of structures: with tetrahedral; hexagonal; cubic packing of balls.

5 November 2025 in Processes
Verified
Journal Article
Open access
PDF file
ASAigul Shongalova
Aigul Shongalova
AKAinagul Kemelbekova
Ainagul Kemelbekova
AUArman Umirzakov
Arman Umirzakov
Indira TashmukhanbetovaIndira Tashmukhanbetova
Indira Tashmukhanbetova
YDYelena Dmitriyeva
Yelena Dmitriyeva
Antimony oxychloride compounds represent a distinct class of inorganic materials that combine structural features characteristic of both oxides and halides. Their compositional flexibility and anisotropic properties make them promising candidates for use in photocatalytic systems, optoelectronic devices, flame-retardant coatings, and energy storage technologies. This review provides an overview of the structural characteristics and synthesis strategies associated with key members of the SbxOyClz family, including SbOCl, Sb4O5Cl2, and Sb8O11Cl2. Emphasis is placed on how synthesis parameters—such as temperature, pH, and precursor composition—govern phase formation, morphology, and resulting properties. Recent advances in composite engineering, controlled doping, and surface modification are discussed as effective routes to overcome limitations such as low conductivity and chemical instability. The broader significance of antimony as a strategic element is also addressed in the context of global resource availability and its role in sustainable technologies. Overall, these materials provide a versatile platform for the design of multifunctional systems tailored to meet future demands in materials science and applied engineering.

11 November 2024 in Journal of Multidisciplinary Applied Natural Science
Verified
Journal Article
Open access
LMLaura Mustafa
Laura Mustafa
MIMarat Ismailov
Marat Ismailov
Indira TashmukhanbetovaIndira Tashmukhanbetova
Indira Tashmukhanbetova
IAIlyas Ablakatov
Ilyas Ablakatov
VZVenera Zhumakanova
Venera Zhumakanova
This study utilized epoxy resin, three types of fabric (carbon fiber, glass fiber, and Kevlar), and two plasticizers – tricresyl phosphate (TCP) and oleic acid (OA) – to enhance the impact toughness of carbon fiber-reinforced plastics (CFRP). The polymer matrix used in the experiments was a hot-cured epoxy compound "Etal Inject-T" consisting of two components: A – epoxy resin and B – hardener, in a mass ratio of 100:49.9. For the fabrication of CFRP plates, both manual and vacuum molding techniques were employed. Combined reinforcement of carbon fiber was achieved using one of two types of fabrics: Ortex 360 glass fiber or Kevlar. Accordingly, two compositions were prepared for the experiments: carbon fiber/glass fiber and carbon fiber/Kevlar. Layer stacking in each composition was performed at ratios of 10:10 and 14:6, consisting of 20 layers in total. The greatest strengthening effect for CFRP in the case of carbon fiber/glass fiber was observed with a layer ratio of 14:6 and matrix modification using 10% TCP plasticizer. The strength of the CFRP increased from 425 to 451 MPa, and the impact toughness (α) improved from 192 to 280 kJ/m². A key feature of this technology is the achievement of high-performance dual-purpose CFRP. This enables the reduction of CFRP structures in aerospace applications by 3 to 5 times, while simultaneously enhancing resistance to impact loads.

30 September 2025 in Mechanics and Technologies
Verified
Journal Article
Open access
PDF file
АУАлматы Қ. Қ.и. Сәтбаев Атындағы Қазақ Ұлттық Техникалық Зерттеу Университеті
Алматы Қ. Қ.и. Сәтбаев Атындағы Қазақ Ұлттық Техникалық Зерттеу Университеті
МСМ.қ. Сағынтай
М.қ. Сағынтай
ААА.а. Адиева
А.а. Адиева
ҚКҚазақ Бас Сәулет-Құрылыс Академиясы Халықаралық Білім Беру Корпорациясы
Қазақ Бас Сәулет-Құрылыс Академиясы Халықаралық Білім Беру Корпорациясы
Indira TashmukhanbetovaIndira Tashmukhanbetova
Indira Tashmukhanbetova
ЕНЕ.з. Нұғман
Е.з. Нұғман
Құрылыстағы аддитивті технологияның қазіргі кездегі өзекті мәселелерінің бірі –3D баспаланған бетонды арматуралау болып тұр. Бұл мақалада 3D баспаланған бетонды арматуралау үрдісін автоматтандыруға ерекше назар аудара отырып, арматуралау әдістеріне жан-жақты шолу жасалған. Арматураның әртүрлі түрлерінің функционалдығы қысқаша қарастырылғанымен, оның технологиялық аспектілеріне назар аударылады. Бұл шолу мақаласында негізгі фокус автоматтандыру тұрғысынан қарастырылғандықтан, автоматтандырылуы мүмкін емес кейбір әдістер қарастырылмады. Шолу мақаласында әр әдіс қарастырылған соң оның автоматтандыру мүмкіндігі бағаланып, және оның қасиеттері дәстүрлі темірбетонмен салыстырылды.

30 June 2026 in Bulletin of Kazakh Leading Academy of Architecture and Construction
Verified
Journal Article
Closed access
YOY.S. Orynbekov
Y.S. Orynbekov
ZAZ.N. Altayeva
Z.N. Altayeva
AYA.S. Yestemessova
A.S. Yestemessova
RNRuslan E. E. Nurlybayev
Ruslan E. E. Nurlybayev
VSV.P. Selyaev
V.P. Selyaev
AMA.A. Murzagulova
A.A. Murzagulova
The aim of this study is to develop a technology for producing a water-dispersion thermal insulation composition based on limestone shell rock mining waste and an acrylate dispersion containing hollow microspheres, as well as to investigate the influence of filled binders on the physical, mechanical, and thermophysical properties of thermal insulation coatings incorporating limestone shell rock from the Zhetybay deposit, Karakiya District, Mangystau Region, Kazakhstan. The microstructure of shell limestone was investigated using scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS) with a JEOL JSM-7000F scanning electron microscope. The determination of the weight and atomic percentages of the major elements confirmed the carbonate nature of the studied raw material and its consistency with the mineral composition of shell limestone mining waste (wt.%/at.%: O – 50.25/59.34; Ca – 34.14/16.09; C – 15.61/24.56). It was established that, to obtain a water-dispersion composition with low density, it is advisable to use finely dispersed fillers in the form of powder, as well as hollow glass and aluminosilicate microspheres. The particle size of shell limestone powder was 5.67 × 10⁻⁶ m, while the contents of calcium carbonate (CaCO₃) and silica (SiO₂) were 71.0 wt.% and 22.5 wt.%, respectively. A relationship between the proportion and content of shell limestone and microspheres in the filled binder system was identified, demonstrating a significant variation in thermal conductivity within the range of 0.010–0.015 W/(m·°C), as well as changes in the density and adhesive strength of the thermal-insulating coating, reaching ρ₍dry₎ = 0.410–0.415 g/cm³ and σ₍adh₎ ≥ 2.05–2.08 MPa, respectively. The optimal composition of the water-dispersion thermal-insulating coating was determined. The content of the main components is as follows (wt.%): styrene–acrylic or acrylic dispersion, 20–25; shell limestone, 20–25; glass microspheres, 3–9; and aluminosilicate microspheres, 20–30