30 March 2016 in PNRPU Mechanics Bulletin
15 March 2022 in Kompleksnoe Ispolzovanie Mineralnogo Syra = Complex Use of Mineral Resources
L"Limited Liability Partnership "
Limited Liability Partnership "
ICInternational Educational Corporation"
International Educational Corporation"
NUN.P. Ogarev Mordovian State University
N.P. Ogarev Mordovian State University
L"Limited Liability Partnership "SAVENERG
Limited Liability Partnership "SAVENERG
+4
The article discusses experimental studies of the size and shape of structured particles of microsilica small angle x-ray scattering method and a photophonon theoretical description of the heat transfer process in complex heterogeneous structures to assessment of the structural characteristics of granular systems for the properties of thermal insulating materials. The mechanism of heat transfer in granular, porous systems is quite complex, since heat exchange occurs in a material consisting of two phases (solid and gas) and at the phase boundary. Heat transfer in liquid thermal insulation coatings can be carried out from one solid particle to another. In this case, the thermal conductivity will depend on: the chemical and elemental composition of the material; particle granulometry; surface topology - the presence of inhomogeneities, defects on the surface; the number of touches and the contact area between the particles. The heat transfer of gas in the pores is carried out when gas molecules collide. Thermal conductivity will be determined by the ratio of the free path of molecules and linear pore sizes, temperature and dynamic viscosity of the gas phase, the nature of the interaction of gas molecules with the solid phase. Heat transfer by radiation depends on the nature of the particles, the dielectric, magnetic permeability and the degree of blackness of the particle surface. Based on the analysis of possible mechanisms of heat transfer in granular systems, it can be argued that the effective thermal conductivity of the system depends, all other things being equal, on the structure of the pore space of granular materials, topology and the number of particle touches. Considering idealized models of the structure of granular materials in the form of ordered folds of perfectly smooth balls, we can obtain several variants of structures: with tetrahedral; hexagonal; cubic packing of balls.
31 December 2018 in IOP Conference Series: Materials Science and Engineering
The present work offers formation principles of reinforced concrete structures design models that are used in the environment with joint influence of mechanical loads and chemically aggressive media. The model is proposed to be described with an equations system of mechanics and physics and chemical kinetics which includes: static equations (L. Navier); geometric equations (A. Cauchy); physical equations (R. Hooke, etc.); kinetic equations of aggressive medium transfer (A. Fick); kinetic equation of substances interaction (K. Guldberg – P. Waage); sorption equation (I. Langmuir). Practical methods for assessing the kinetics of estimated parameters change were developed. Methods for assessing a service life of reinforced concrete structures used in the joint conditions influence of mechanical loads and chemically aggressive media allowing predicting the service life of a structure at different stages - from design to physical wear - were developed.
19 November 2021 in Russian Journal of Building Construction and Architecture
15 December 2024 in Construction Materials
The paper provides the results of studying the dependence of elastic-strength properties of unfilled epoxy polymers on moisture content by example of 18 different compounds. It includes the analysis of possible effects associated with changes in free moisture content in the polymer matrix structure, including a change in nature of behavior under load from brittle to viscous with a multiple increase in relative deformations at rupture, as well as quasi-embrittlement, manifested in the elimination or reduction of forced highly elastic deformations on the deformation curve. In addition to the shape corresponding to the one close to linear dependence of the change in tensile strength and modulus of elasticity on moisture content with a maximum around W~0%, the study revealed other forms of interrelation of parameters under consideration: with a local maximum of values in the “optimal moisture content” area differing from W~0%; with “plateau” sections around both extreme humidity conditions. The similarity of the effects occurring around moisture content of W~0% for epoxy polymer samples both in the control state and after prolonged climatic aging is shown. A hypothesis was formulated regarding the existence of a pattern common to epoxy polymers of change in the nature of the dependence of mechanical strength on moisture content during field climatic aging. Based on a joint analysis of the dependence curves of elastic-strength parameters on moisture content, the most representative epoxy polymer compounds for field studies were selected to compile training datasets for a machine learning model predicting changes in the elastic-strength properties of polymer materials exposed to environmental factors.