Natural fibers have become increasingly popular owing to their affordability, environmental friendliness, and renewability. Owing to their abundance and low density, they have gained attention in their use as reinforcements in polymer composites. However, untreated natural fiber composites have several disadvantages, including higher water absorption, low-to-moderate mechanical properties, and challenges with fiber-to-matrix adhesion. To address these drawbacks, various approaches have been employed, such as the chemical treatment of natural fibers, fiber hybridization, and the incorporation of nanoparticles/fillers. Chemical treatment enhances the interfacial bonding with the polymer matrix by different mechanisms. Hybridization enhances the mechanical properties of composites by leveraging the advantages of individual fibers. The incorporation of nanoparticles enhances the mechanical properties and various other properties due to a significant increase in interfacial interaction, which is a result of the increased surface area of nanoparticles.
This research paper presents comparative analysis of morphological, physical, tensile and thermal properties of raw and NaOH treated natural fiber extracted from the stems of Tinospora cordifolia herbaceous vine. Diameter & density measurements, X-ray Diffraction (XRD) analysis, Scanning Electron Microscopy (SEM), Fourier Transform Infrared (FTIR) spectroscopy, single fiber tensile tests and Thermogravimetric analysis (TGA) were carried out. The diameter reduced and density increased post treatment. SEM images revealed the removal of non-cellulosic contents, finer fibrillation, more clear hexagonal structure and formation of pores & voids post treatment. The Crystalline Index (C.I) and Crystallite Size (C.S) obtained from the XRD spectra enhanced after treatment which is evident from the absence of amorphous shoulders/bumps. FTIR analysis have revealed the removal of constituents such as hemicellulose, lignin and wax. The tensile strength enhanced, Young’s modulus and percent elongation at break reduced post treatment. The thermal stability enhanced; however, the maximum degradation showed a slight reduction.
Epoxy resins are prone to serious moisture absorption inspite of their inherent advantages, which can be mitigated by the incorporation of montmorillonite nanoclay that provide tortuous path to flow of moisture. Moisture absorption studies of epoxy clay nanocomposites is carried out, to analyse the effect of nanoclay content, immersion media and immersion temperature. Nanocomposites prepared in 0.5, 1 and 1.5 wt% using magnetic stirring and ultrasonication and neat epoxy specimen were immersed in distilled water and artificial seawater maintained at 28 and 38 °C till saturation. Fick’s and Langmuir’s models were applied to calculate the kinetic parameters from the water absorption graphs. Atomic force microscopy (AFM), X-ray diffraction spectroscopy (XRD), Fourier transform infrared spectroscopy (FTIR) and scanning electron microscope with energy dispersive X-ray (SEM–EDX) characterizations were performed. Diffusivity is least for nanocomposite containing 0.5 wt% nanoclay at both temperatures in both medium. However, it is least when the medium is distilled water. As the temperature of immersion medium increases, the diffusivity also increases. Saturation moisture uptake increased with increase in nanoclay content, because of the residual hydrophilic nature of nanoclay. AFM and XRD analysis revealed better dispersion and exfoliated structure of nanoclay respectively at 0.5 wt% loading. FTIR spectroscopy was applied to identify the chemical bonds that helped in proposing the reaction mechanism of the nanocomposite synthesis. Spectra comparison of dry and wet specimens complimented the moisture absorption data by showing lower infrared transmittance in wet specimens. With Increase in nanoclay content, the transmittance decreased corresponding to increase in saturation moisture uptake for distilled water immersed specimens. SEM–EDX analysis distinguished between the cations entered from the artificial seawater and cations that were still present in the nanoclay.
Surface modified montmorillonite nanoclay created tortuous path to flow of moisture and enhanced bonding of PALF with epoxy, which resulted in lower diffusion coefficient and reduced impact of moisture diffusion in epoxy PALF nanoclay composites.