Establishing stable and efficient Pt-free counter electrodes (CEs) is an important challenge for dye-sensitized solar cells (DSSCs). Ti3C2Tx MXene, with its high catalytic activity and conductivity, has gained attention as a CE in DSSCs. The focus of this paper is on the preparation of Ti3C2Tx decorated carbon nanotubes (CNTs) composite electrode materials (CNTs/Ti3C2Tx), and testing their performance as CEs in DSSCs. Through a series of electrochemical tests, a CNTs/Ti3C2Tx CE exhibits good electrocatalytic activity toward iodine-based electrolytes with low charge transfer resistance, which is close to the performance of a Pt CE. The photoelectric conversion efficiency (PCE) of the CNTs/Ti3C2Tx (1.0 wt%) CE-based DSSCs reaches 5.83%, which is much higher than that of the CNTs CE (3.70%), and approximates that of the Pt CE (6.61%). We attribute the improved performance to the synergistic effect of the excellent conductivity and unique two-dimensional chemical structure of Ti3C2Tx MXene. Moreover, the photostability test of continuous light exposure shows that the CNTs/Ti3C2Tx-1.0 wt% (C/T-1.0 wt%) CE exhibits good stability to the electrolyte. Therefore, CNTs/Ti3C2Tx composites can be used as an efficient Pt-free CE for DSSCs in the future.
20 October 2023 in Journal of Colloid and Interface Science
Hole transport layer (HTL) plays a critical role in perovskite solar cells (PSCs). We focus on the improvement of PSCs performance with MoS 2 nanosheets as the anode buffer layer in the inverted photovoltaic structure. PSC with single MoS 2 buffer layer shows poor performance in power conversion efficiency (PCE) and the long-term stability. By combination of MoS 2 and Poly[bis(4-phenyl) (2,4,6-trimethylphenyl) amine] (PTAA) as double-layer HTL, the PCE is improved to 18.47%, while the control device with PTAA alone shows a PCE of 14.48%. The same phenomenon is also found in 2D PSCs. For double-layer HTL devices, the PCE reaches 13.19%, and the corresponding PCE of the control group using PTAA alone is 10.13%. This significant improvement is attributed to the reduced interface resistance and improved hole extraction ability as shown by the electric impedance spectroscopy and fluorescence spectroscopy. In addition, the improved device exhibits better stability because the PCE still maintains 66% of the initial value after 500 h of storage, which is higher than the 47% of the remaining PCE from device based on single PTAA or MoS 2 . Our results demonstrate the potential of polymer/inorganic nanomaterial as a double-layer buffer material for PSCs.
A novel nanozyme (urea@Cu-NF) was synthesized by self-assembly of urea and copper phosphate with urea as plasticizer. Urea@Cu-NF exhibited excellent peroxidase-like activity with the ability to oxidize TMB in the presence of H2O2. However, its peroxidase-like activity could be inhibited by resveratrol, leading to an absorption decrease in the intensity of oxTMB. Based on this phenomenon, a colorimetric method was designed for resveratrol detection. The colorimetric reaction could be completed within 20 min with a linear range of 1–120 μM. The limit of detection (LOD) of resveratrol is 0.43 μM. Our experimental results demonstrate that urea@Cu-NF has enormous potential to function as a cheap and accurate quality detection tool.