Hongye Wang

Dr. Hongye Wang


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 December 2022 in Journal of Lightwave Technology
Verified
Journal Article
Closed access
SYShitai Yang
Shitai Yang
HWHongye Wang
Hongye Wang
LMLingzhi Meng
Lingzhi Meng
YCYijian Chen
Yijian Chen
BDBaoming Dong
Baoming Dong
LYLibo Yuan
Libo Yuan
A dual-FBG and F-P cavity compound optical fiber sensor based on a multi-core fiber (MCF) is proposed. A hollow core fiber (HCF) was fused between a single-mode fiber (SMF) and a MCF to form the F-P cavity. Two FBGs with different reflective wavelength were prepared on a side core (SC) and the central core (CC) of MCF respectively. An asymmetric 45° reflector was fabricated at the end of the MCF to make the optical path of the dual-FBG and the F-P cavity in series. The combination of the F-P cavity and the FBG on the CC can measure temperature and axial strain, simultaneously, while both of them are insensitive to bending. The FBG on the SC is sensitive to bending and can be used for curvature measurement, and the temperature and axial strain compensation can be achieved by the combination of the F-P cavity and FBG on the CC. Therefore, the curvature, axial strain and temperature can be measured simultaneously by the compound sensor on a single optical fiber.

17 June 2022 in Journal of Lightwave Technology
Verified
Journal Article
Closed access
SYShitai Yang
Shitai Yang
HWHongye Wang
Hongye Wang
TYTingting Yuan
Tingting Yuan
XZXiaotong Zhang
Xiaotong Zhang
LYLibo Yuan
Libo Yuan
A high-sensitivity bending sensor based on multi-core fiber Bragg gratings (MCFBGs) is presented and demonstrated. The bending sensor is based on FBGs fabricated on the symmetric distribution cores of seven-core fiber (SCF), where a 45-degree reflective cone frustum (RCF) is fabricated at the fiber end. The optical paths of two symmetric cores are connected by the 45-degree RCF. The wavelength drifts of the two FBGs on the symmetric cores caused by bending were similar in magnitude and opposite in direction, while the wavelength drifts of the two FBGs caused by temperature were similar in magnitude and direction. Therefore, the influence of temperature change on the curvature measurement can be automatically eliminated, and the bending sensitivity can be doubled by calculating the difference between the reflected wavelengths of the two FBGs. The sensor's spectral responses to the curvature at different bending directions are experimentally investigated. The maximum curvature sensitivity of the sensor is 225.9 pm/m −1 , within the curvature range from 0 to 6.9 m −1 .

13 July 2024 in Sensors
Verified
Journal Article
Open access
PDF file
XZXiaotong Zhang
Xiaotong Zhang
HWHongye Wang
Hongye Wang
TYTingting Yuan
Tingting Yuan
LYLibo Yuan
Libo Yuan
With the increase in the demand for large-capacity optical communication capacity, multi-core optical fiber (MCF) communication technology has developed, and both the types of MCFs and related devices have become increasingly mature. The application of MCFs in the field of sensing has also received more and more attention, among which MCF fiber Bragg grating (FBG) devices have received more and more attention and have been widely used in various fields. In this paper, the main writing methods of MCF FBGs and their sensing applications are reviewed. The future development of the MCF FBG is also prospected.

8 March 2024 in Sensors
Verified
Journal Article
Open access
PDF file
CFChengcheng Feng
Chengcheng Feng
HNHao Niu
Hao Niu
HWHongye Wang
Hongye Wang
DWDonghui Wang
Donghui Wang
LWLiuxia Wei
Liuxia Wei
LYLibo Yuan
Libo Yuan
In this article, we propose and demonstrate a probe-type multi-core fiber (MCF) sensor for the multi-parameter measurement of seawater. The sensor comprises an MCF and two capillary optical fibers (COFs) with distinct inner diameters, in which a 45° symmetric core reflection (SCR) structure and a step-like inner diameter capillary (SIDC) structure filled with polydimethylsiloxane (PDMS) are fabricated at the fiber end. The sensor is equipped with three channels for different measurements. The surface plasmon resonance (SPR) channel (CHSPR) based on the side-polished MCF is utilized for salinity measurement. The fiber end air cavity, forming the Fabry–Pérot interference (FPI) channel (CHFPI), is utilized for pressure and temperature measurement. Additionally, the fiber Bragg grating (FBG) channel (CHFBG), which is inscribed in the central core, serves as temperature compensation for the measurement results. By combining three sensing principles with space division multiplexing (SDM) technology, the sensor overcomes the common challenges faced by multi-parameter sensors, such as channel crosstalk and signal demodulation difficulties. The experimental results indicate that the sensor has sensitivities of 0.36 nm/‰, −10.62 nm/MPa, and −0.19 nm/°C for salinity, pressure, and temperature, respectively. As a highly integrated and easily demodulated probe-type optical fiber sensor, it can serve as a valuable reference for the development of multi-parameter fiber optic sensors.

18 February 2025 in Optics Express
Verified
Journal Article
Closed access
QXQI XIA
QI XIA
XZXiaotong Zhang
Xiaotong Zhang
KZKai Zhang
Kai Zhang
HWHongye Wang
Hongye Wang
LYLibo Yuan
Libo Yuan
TYTingting Yuan
Tingting Yuan
Optical fiber sensors have advantages such as small size and good biocompatibility, leading to widespread interest in the field of hand motion tracking. In this work, we designed a multi-core fiber Bragg grating Fabry-Perots (FBG-FPs) sensor based on FP interference theory. We inscribed short FBGs with different wavelengths in different fiber cores to form the FP, and then employed thermal diffusion technology for single-channel acquisition of the multi-core fiber FBG-FPs sensor. We also proposed a signal demodulation method for the FBG-FPs sensor based on the principal component analysis (PCA) algorithm and conducted experiments on strain, temperature, and bending sensing. The results indicate that the bending sensitivities of the three external cores exhibit strong dependence on bending, with a maximum sensitivity of 52.8 pm/m−1. The direction and curvature of bending can be reconstructed using the wavelength shifts obtained from the PCA algorithm. This sensor features a compact structure, flexible fabrication, and low cost, improving the adaptability to individual differences in optical fiber smart gloves and enhancing multiplexing sensing capabilities, thus providing broad prospects for the development of human-machine interfaces and medical health monitoring.

15 February 2023 in IEEE Sensors Journal
Verified
Journal Article
Closed access
HWHongye Wang
Hongye Wang
LMLingzhi Meng
Lingzhi Meng
QXQi Xia
Qi Xia
SYShitai Yang
Shitai Yang
TYTingting Yuan
Tingting Yuan
LYLibo Yuan
Libo Yuan
A bending sensor is proposed to demodulate the multi-channel bending signals of multi-core fiber (MCF) to single-channel signals by using the phase mask method combined with the thermal diffusion technology (TDT). A four-core fiber (FCF) bending sensor was fabricated. Each fiber core of the FCF had different resonant wavelengths through the method of core-by-core inscribed fiber Bragg gratings (FBGs) at the same axial position. The FCF was coupled with a single mode fiber (SMF) by the TDT method. Finally, the single-channel measurement of the three-dimensional (3-D) parallel FCF FBGs signals was realized. The FBGs on four cores of FCF were equivalent to the FBGs on two orthogonal cores by differential operation. The experimental results showed that the maximum bending sensitivities of the equivalent FBGs were 187.2 and -192.6 pm/m -1 , respectively. This sensor realized single-channel demodulation of MCF signals with elimination of the crosstalk caused by temperature and strain. The proposed sensor fabrication technology with high integration, high sensitivity, and reduced crosstalk, is expected to be applied in the field of three-dimensional shape measurement or wearable artificial electronics.