To characterize the nonlinear relationship between load and displacement and its dependency on temperature and time variations, the rate form of thermomechanical constitutive equations for shape memory polymers is newly derived. Experimental tests of the shape memory polymers are analyzed to acquire the parameters needed for the model. In order to generate a fast recovery rate and a higher recovery ratio, an asymmetric shape memory polymer composite reinforced with woven fabrics is developed and fabricated. Moreover, the efficiency of the asymmetric shape memory polymer composite is evaluated through shape recovery tests after bending. A numerical model of the shape memory polymer composite is newly established. In addition, the structural nonlinear behavior of the asymmetric shape memory polymer composite is analyzed with time and temperature dependence. A “ ”-shaped cross-sectional shape memory polymer composite boom is fabricated, and its deployment procedures are demonstrated for the application of self-deployable booms in gossamer space structures.
1 January 2014 in Mathematical Problems in Engineering
The loading‐rate dependency on the pseudoelastic behaviors of shape memory alloy (SMA) wires is experimentally and numerically investigated. The results are analyzed to estimate the parameters for a thermomechanical constitutive model of SMA wire with strain‐rate dependency of the hysteresis behavior. An analytical model of SMAs is developed by using nonconstant parameters during various strain rates. Numerical simulations are performed to demonstrate the accuracy of the improved model.
For a few decades, various methods of suppressing structural vibration have been proposed. The present study proposes and exploits an effective method of suppressing the vibration of cantilever plates similar to the solar panels of a satellite. Magnetically tuned mass dampers (mTMDs) are a tuned mass damper (TMD) with eddy current damping (ECD). We introduce the mTMD concept for the multimode vibration suppression of the cantilever plate. The design parameters of the mTMD are determined based on the parametric study of the theoretical four‐degree‐of‐freedom model, which was derived for a cantilever plate with TMDs. Two TMDs are optimized for the first bending mode and first torsion mode of the plate, and they are verified analytically and experimentally. To increase the damping performance of the TMDs, ECD is introduced. Its damping ratios are estimated analytically and verified experimentally.
14 November 2016 in Mechanics of Advanced Materials and Structures
This article investigates (experimentally and numerically) the time and temperature-dependent folding and unfolding behavior, including the structural nonlinearity, of thin-walled softenable composite structures. The composites are fabricated with woven fabric fibers and a heat softenable material of the shape memory polymer (SMP) resin. A numerical model is developed. The model is based on the elastic properties of the woven fabric fibers, their fabric geometry, and the thermo-viscoelastic properties of the SMP resin. A thin-walled cylindrical boom, which can be flexibly folded into an arbitrary configuration and be self-deployed, is fabricated using the heat softenable composite. The viscoelasticity and the shape memory behaviors are investigated during the folding and unfolding of the boom at elevated temperatures.
18 September 2019 in Journal of Intelligent Material Systems and Structures
A sandwiched morphing structure is developed using an Origami-inspired shape memory dual-matrix composite core and shape memory polymer composite skins. The geometric parameters of the morphing structure are designed to have a zero Poisson’s ratio. In addition, an analytical model is developed to analyze the three-dimensional morphing structure easily. The shape memory dual-matrix composites are fabricated with woven fabrics based on the shape memory polymers, and an epoxy matrix is used to ensure a flexible and shape-recoverable structure. The shape recoverability of the shape memory polymer composite skins is verified by measuring the shape recovery ratio at various temperatures. Based on the tensile tests for the shape memory polymer composite skins and shape memory polymer hinges, it is found that the morphing structure can be highly flexible depending on temperature. Finally, the bending and shape recovery behaviors of the morphing structure are demonstrated.
The failure of laminated composites under out-of-plane loadings is experimentally and numerically investigated. For flexure failure prediction, a modified failure criterion is proposed. A progressive failure algorithm is developed for numerical analyses. In experiments, quasi–isotropic and cross-ply laminated composites are fabricated by using unidirectional carbon fiber and glass fabric prepregs. Three-point bending test is performed and the accuracy of the failure algorithm is verified with experimental results. In addition, the flexure failure behaviors are compared with those of a commercial finite element analysis program using the other failure criteria such as maximum strain, maximum stress, and Tasi–Wu.