The reasonable determination of wall pressure is critical for the design of silo structures. In this study, the primary objective is to present four novel wall pressure coefficients based on four true triaxial strength criteria in the quasiplane strain state. These four strength criteria are the Drucker‐Prager (D‐P) criterion, the Matsuoka‐Nakai (M‐N) criterion, the Lade‐Duncan (L‐D) criterion, and the unified strength theory (UST), and they all consider the effect of the intermediate stress yet to different extent. These coefficients have a wide application range and are readily used to predict the distribution of wall pressure for deep and squat silos. Comprehensive comparisons are made between the predictions from the wall pressure coefficients described herein and experimental data reported in the literature as well as the results from the European, American, and Chinese silo standards or the Rankine and the modified Coulomb theories. It is found that the effect of the intermediate stress on the wall pressure is very significant for both deep and squat silos; the wall pressure of the D‐P criterion is underestimated, whereas that of the Mohr‐Coulomb (M‐C) criterion is overestimated; the L‐D criterion is recommended to be adopted to calculate the soil wall pressure.
Boundary Effect and Dynamic Response Study for the Penetration of Rigid Projectiles into Thick, Finite-Radius, Metallic Targets: This study uses the unified strength theory to analyse the elastoplastic stage and plastic stage of a linear strain-hardening target material while considering the effects of the intermediate principal stress and the free lateral boundaries of the target. In this investigation, analytical solutions of the radial stress in the cavity wall are obtained, and a unified penetration model of the target material is built. On this basis, penetration resistance formulas and penetration depth formulas for rigid projectiles with various nose shapes penetrating into thick, finite-radius, metallic targets are deduced, the solutions of which are obtained by utilizing the Simpson method. Accordingly, the proposed method offers a broader scope of application and higher accuracy than previous methods. Through this method, a series of analytical solutions based on different criteria can be obtained, and the penetration depth ranges of targets under different striking velocities can be effectively predicted. Moreover, penetration processes under different conditions are numerically simulated using the software ANSYS/LS-DYNA to study the motion law of the projectiles and the dynamic response of the targets. From the theoretical and numerical approaches, a list of influencing factors for terminal ballistic effects are analysed, including the strength criterion differences, the strength parameter b, the striking velocity , the projectile nose shape, and the target radius-to-projectile radius ratio rt/a. The results indicate that, as b changes from 1 to 0, the penetration depth Dmax increases by 22.45%. Additionally, Dmax increases by 40.76% when rt/a changes from 16 to 4; hence, it cannot be calculated as an unlimited-size target anymore when rt/a ≤ 16. In weapons field tests, the radius of the metallic target can be conservatively designed to be greater than 28 times the projectile radius to ignore the effect from the free lateral boundaries of the target.
Accurate prediction of the bearing capacity of foundations near slopes remains challenging when soils exhibit heterogeneity and anisotropy. Although numerical simulations can account for these effects with high precision, they are computationally demanding and provide limited physical insight. Analytical solutions that can explicitly incorporate spatial variability, directional dependence, and the influence of intermediate principal stress are still lacking. This study addresses this gap by developing an analytical solution for the ultimate bearing capacity of strip foundations near slopes based on the Unified Strength Theory (UST). The method assumes a uniformly distributed surface load and a single-sided failure mode, while introducing heterogeneity and anisotropy coefficients to represent the depth dependent and directional variation of cohesion. Validation against published theoretical, numerical, and experimental results demonstrates strong agreement, with a maximum deviation of 6.2%. Parametric sensitivity analysis indicates that increasing the heterogeneity coefficient from 0 to 1 enhances bearing capacity by 67.9–83.4%, while increasing the anisotropy coefficient from 0.6 to 1.4 reduces it by 20.8–22.3% for different base roughness. Neglecting the intermediate principal stress results in a 64.5–67.9% underestimation of the ultimate bearing capacity with different anisotropy coefficients and base roughness. The proposed analytical model based on the UST provides improved quantitative accuracy and theoretical generality, enabling safer and more economical design of foundations near slopes under heterogeneous and anisotropic soil conditions.
Through axial compression tests, the influence of three stirrup indexes (space, form, and strength) on the confining performance of multi-spiral composite stirrups in square reinforced concrete (RC) columns were analyzed, and the square RC columns with traditional well-shaped composite stirrups were used as the reference group. The results show that the multi-spiral composite stirrups had a positive contribution to the important indexes (bearing capacity and ductility) of the square RC columns due to its multiple restraint mechanism on core concrete. In terms of constraint effect, the five-spiral composite stirrup is the best, followed by the four-spiral composite stirrup, and the last is the traditional well-shaped composite stirrup. The section of the concrete square column is divided into highly constrained, partially constrained and unconstrained regions and the constraint mechanism of multi-spiral composite stirrups is discussed. The formulas for calculating the peak stress, peak strain, and ultimate compressive strain of the constrained column are presented, and the relative error between the theoretical values and the tested values is small. The constitutive model of concrete constrained by multi-spiral composite stirrups is established and compared with other constitutive models. The results show that the proposed model fits well with the experimental curves.
In order to solve the problem of inadequate confinement provided by traditional rectangular stirrups in concrete square columns under stringent seismic fortification requirements, a spiral stirrup with a better constraint effect was used in the square columns in this study. Through a comprehensive analysis of test results, numerical simulations, and theoretical derivations, the seismic performance and shear capacity calculation methods of concrete square columns confined with five-spiral composite stirrups were investigated. This study provides pertinent technical data to facilitate the engineering application of such columns. The existing low-cycle repeated loading tests of 13 concrete square columns confined with five-spiral composite stirrups were collected and analyzed; some of these specimens were selected for finite element numerical simulation, and the simulation results were compared with the test results. The results indicate that the hysteresis curves and skeleton curves obtained from the numerical simulation agree well with the experimental curves, which verifies the rationality of the numerical simulation model proposed in this paper; post-peak load behavior reveals a pronounced compound confinement effect attributable to the five-spiral stirrups; during mid-to-late loading stages, the tensile stress in small spiral stirrups at intersections with larger spirals escalates rapidly, resulting in maximum transverse confinement within these areas. Based on the validated numerical simulation approach, a comprehensive analysis was performed to investigate the effects of axial compression ratio, shear-span ratio, spacing of small spiral stirrups, and diameter ratio of large-to-small spiral stirrups on the seismic performance of the specimens. The results demonstrate that when the spacing of large and small spiral stirrups is kept consistent, the specimens yield optimal strength and ductility. With the diameter of the central large-spiral stirrup fixed, either an increase or a decrease in the diameter of small spiral stirrups will induce varying degrees of reduction in both strength and ductility of the specimens. Furthermore, the five-spiral reinforced columns achieve the best overall seismic performance when the diameter of the central large spiral stirrup reaches the maximum allowable value for the cross-section, and the diameter of small spiral stirrups is set to one-third that of the large spiral stirrup. Finally, the shear mechanism and influencing factors of the shear capacity of the concrete square columns confined with five-spiral composite stirrups were discussed, and a practical formula for calculating the shear capacity of such columns was proposed.