Sediment-laden water significantly exacerbates cavitation damage in hydraulic machinery compared to clear water, underscoring the importance of investigating the effects of sediment on cavitation. This study examines cavitation in sediment-laden water using a Venturi flow channel and a high-speed camera system is utilized to capture the morphology and evolution of cavitation clouds. Natural river sand samples with a median diameter of 0.05, 0.07, and 0.09 mm are selected, and sediment-laden water with a concentration of 10, 30, and 50 g/L is prepared for the study. The results indicate that increasing sediment concentration or reducing sediment size intensifies cavitation, shortens the evolution cycle of cavitation clouds, and elevates the frequency of cavitation cloud shedding. Meanwhile, numerical simulation is conducted based on a gas-liquid-solid phase mixing model. The findings indicate that a higher sediment concentration corresponds to a greater shear effect near the wall, which raises the drag on the attached sheet-like cavitation clouds and enhances the re-entrant jet which can intensify the shedding of cavitation clouds. Furthermore, sediment particles contribute to more vortex: they enhance the impact on smooth, wall-adjacent sheet-like vortex, while simultaneously consuming more energy during the vortex return process, resulting in the creation of additional small-scale vortices.
30 July 2026 in Flow Measurement and Instrumentation
Pelton turbines are increasingly widely applied in hydropower development in highhead, sedimentladen rivers in Southwest China. However, the hydraulic loss mechanisms in their fixed flow passage components (distributor and injector) under sedimentladen flow conditions remain unclear, and traditional methods are inadequate to precisely locate loss sources and quantify sediment impacts. To address this issue, this paper takes a sixnozzle Pelton turbine with four deflectors as the research object, establishes a gasliquidsolid threephase numerical simulation method based on the VOF multiphase model, the SST kω turbulence model, and the DPM discrete phase model, and introduces the entropy production theory to quantitatively evaluate and spatially resolve the energy losses in the distributor and injector under both clearwater and sedimentladen conditions.The results indicate that sediment-laden flow increases the indirect entropy production in the entire flow passage by approximately 20% compared with clear-water conditions, with the increments concentrated at the trailing edge of the deflectors, the needle tail, and the distributor bifurcations. The inertial perturbation of sediment particles expands the region of direct entropy production and exacerbates turbulent dissipation through particlevortex coupling, leading to a significant deterioration of jet stability at the nozzle outlet. The inlet flow fields of different nozzles exhibit notable differences due to the transport of secondary flow from the distributor. Although the deflectors can effectively rectify the flow, the Kármán vortex street at their trailing edge induces additional losses. Moreover, extending the trailingedge length of the deflector (560 mm scheme) can smooth the adverse pressure gradient, delay boundary layer separation, and effectively reduce the energy dissipation in the shear layer. This study quantitatively reveals the enhancement mechanism of sediment on hydraulic losses in fixed flow passage components and the regulating effect of deflector geometry, providing a theoretical basis for efficiency improvement and antierosion optimization design of Pelton turbines in high sedimentladen regions.
12 October 2026 in Flow Measurement and Instrumentation