Silicon physical unclonable function (PUF) implemented by static random access memory (SRAM) exists inherent demerit of unstable cells due to noise of environment and circuits, which significantly restricts its reproducibility. In this paper, a 16T SRAM cell with reset-delay circuit and a 2-stage voltage ramp up is fabricated and reported. Compared to conventional SRAM structure, each PUF cell adds a pair of pull-up PMOS (P-channel metal oxide semiconductor) and pull-down NMOS (N-channel metal oxide semiconductor) controlled by reset and delayed-reset signals respectively, resulting in two positive feedback stages with different amplification coefficients when the voltage is ramped up. PUF array consists of 4064 cells, 322 dummy cells and a group of 8 series-connected inverters with an area of 304 μm × 650 μm to match the digital post-processing module. PUF test chip was fabricated in HH-Grace 110 nm platform with total area 1140 × 1140 μm 2 . The average HDintra (intra-chip Hamming distance, also bit error rate, BER) and HDinter (inter-chip Hamming distance) values of the 50 PUF chips in SOP16 package measured at normal point (1.5 V /25°C) were 1.92% and 49.85%, respectively.
In order to meet the reliability requirements of communication for underwater resource exploration, this study develops an underwater wireless optical communication (UWOC) system utilizing a blue semiconductor laser as the light source. At the receiver, a fully digital automatic gain control (AGC) module, implemented on a field-programmable gate array (FPGA), is designed to mitigate signal fluctuations induced by underwater turbulence. Digital filtering techniques, including median filtering (MF) and bilateral edge detection filtering (BEDF), are also employed to improve signal demodulation reliability. An improved Reed–Solomon (RS) coding scheme is further adopted to significantly reduce the bit error rate (BER). The design of a highly reliable UWOC system was realized based on the above techniques. The system’s performance was evaluated across a range of signal-to-noise ratios (SNRs) and bubble intensities. The results show that the digital AGC module can provide a gain range from −3.2 dB to 16 dB, adapting to varying signal strengths, which greatly bolsters the system’s resilience against underwater turbulence. Filtering techniques and RS coding further enhance the system’s immunity to interference and reduce the system BER. Communication experiments were conducted over various distances under three distinct water quality conditions. The results demonstrate that, within the detection range of the avalanche photodiode (APD), the system consistently maintained a BER below 3.8 × 10−3 across all water types, thereby confirming its high reliability. In clear seawater, the system demonstrated reliable information transmission over a 10 m distance at a data rate of 10 Mbps, achieving a BER of 2 × 10−8. Theoretical calculations indicate that the maximum transmission distance in clear seawater can reach 111.35 m.