Helun Song

Helun Song


Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 July 2024 in IEEE Sensors Journal
Verified
Journal Article
Closed access
ZWZhengguang Wang
Zhengguang Wang
NLNan Liu
Nan Liu
PDPeng Ding
Peng Ding
YJYafei Ji
Yafei Ji
ZRZhanqiang Ru
Zhanqiang Ru
HSHelun Song
Helun Song
To maintain the functionality of the NMR gyroscope, extracting the precession phase and compensating for the transverse driving field is essential. The digital lock-in amplifier (DLIA) effectively captures amplitude and phase information from weak signals. The performance of the low-pass filter (LPF) within the DLIA is significant. To achieve high precision, the finite impulse response (FIR) filter requires an extremely low cut-off frequency, which results in higher order, complex operations, and significant resource consumption. The moving average filter (MAF) has high attenuation at specific frequencies and low attenuation at others. Meanwhile, lengthy windows result in increased resource consumption, higher latency, and the inability to capture rapidly changing signals. To address these challenges, a cascade filter structure is proposed, where a low-order FIR filter is cascaded with a small window MAF. This structure utilizes the FIR filter for high stopband attenuation, while the MAF further attenuates at specified frequencies and narrows the transition band. Consequently, this improvement effectively reduces the FIR filter order and MAF window length, preventing the attenuation of swiftly changing signals caused by extended window lengths. To minimize resource consumption, a dual FIR filters resource optimization method is introduced based on time-division multiplexing (TDM) and parallel distributed algorithms (PDA), allowing two FIR filters to share one coefficient table. Subsequently, the performance of the proposed DLIA is evaluated under various conditions and implemented in a field programmable gate array (FPGA). The results indicate that the proposed DLIA exhibits superior performance, low computational complexity, and low resource utilization.

4 November 2024 in Applied Physics Letters
Verified
Journal Article
Closed access
PDF file
YYYuhao Yin
Yuhao Yin
HZHaiyang Zhao
Haiyang Zhao
RLRong Liu
Rong Liu
SFShizhao Fan
Shizhao Fan
JSJiandong Sun
Jiandong Sun
HYHui Yang
Hui Yang
Sc-alloyed AlN epilayers were grown on commercial GaN/sapphire templates by molecular beam epitaxy (MBE) to validate the Sc composition of 18% and in-plane lattice matching with GaN. As-grown Sc0.18Al0.82N/GaN heterostructure exhibits a two-dimensional electron gas (2DEG) density of 3.58 × 1013 (2.96 × 1013) cm−2 and a mobility of 241 (295) cm2⋅V−1⋅s−1 at 300 (77) K, demonstrating the feasibility of employing its high spontaneous polarization toward high 2DEG density and highlighting detrimental impurity scattering due to the regrowth interface. Implementation of AlN impurity blocking layers boosts 2DEG mobility to 1290 (8730) cm2 V−1⋅s−1at 300 (77) K. In addition, we have engineered a surface-treatment strategy to selectively decompose the 2.5-nm-thick GaN cap layer of commercial GaN(2.5 nm)/Al0.20Ga0.80N(22 nm)/GaN heterostructure epi-wafers at high temperature prior to MBE regrowth of Sc0.18Al0.82N to eliminate impurity incorporation at the regrowth interface. Regrowth of a Sc0.18Al0.82N layer on the pristine Al0.20Ga0.80N surface increases 2DEG density from 7.89 × 1012 to 9.57 × 1012 cm−2, together with a slight reduction in mobility from 2160 to 1970 cm2⋅V−1⋅s−1 at 300 K, reducing the sheet resistance by 10%. Our calculation implies that it is practical to boost 2DEG density to over 2.0 × 1013 cm−2 by thinning Al0.20Ga0.80N down to 4 nm.

1 March 2024 in Chinese Journal of Electronics
Verified
Journal Article
Closed access
MSMinte Song
Minte Song
NLNan Liu
Nan Liu
SZShuaiyang Zhou
Shuaiyang Zhou
ZWZhengguang Wang
Zhengguang Wang
RZRu Zhanqiang
Ru Zhanqiang
HSHelun Song
Helun Song
Silicon physical unclonable function (PUF) implemented by static random access memory (SRAM) exists inherent demerit of unstable cells due to noise of environment and circuits, which significantly restricts its reproducibility. In this paper, a 16T SRAM cell with reset-delay circuit and a 2-stage voltage ramp up is fabricated and reported. Compared to conventional SRAM structure, each PUF cell adds a pair of pull-up PMOS (P-channel metal oxide semiconductor) and pull-down NMOS (N-channel metal oxide semiconductor) controlled by reset and delayed-reset signals respectively, resulting in two positive feedback stages with different amplification coefficients when the voltage is ramped up. PUF array consists of 4064 cells, 322 dummy cells and a group of 8 series-connected inverters with an area of 304 μm × 650 μm to match the digital post-processing module. PUF test chip was fabricated in HH-Grace 110 nm platform with total area 1140 × 1140 μm 2 . The average HDintra (intra-chip Hamming distance, also bit error rate, BER) and HDinter (inter-chip Hamming distance) values of the 50 PUF chips in SOP16 package measured at normal point (1.5 V /25°C) were 1.92% and 49.85%, respectively.

24 March 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
THTengfei Han
Tengfei Han
PDPeng Ding
Peng Ding
NLNan Liu
Nan Liu
ZWZhengguang Wang
Zhengguang Wang
ZLZhenyao Li
Zhenyao Li
ZYZhizhen Yin
Zhizhen Yin
In order to meet the reliability requirements of communication for underwater resource exploration, this study develops an underwater wireless optical communication (UWOC) system utilizing a blue semiconductor laser as the light source. At the receiver, a fully digital automatic gain control (AGC) module, implemented on a field-programmable gate array (FPGA), is designed to mitigate signal fluctuations induced by underwater turbulence. Digital filtering techniques, including median filtering (MF) and bilateral edge detection filtering (BEDF), are also employed to improve signal demodulation reliability. An improved Reed–Solomon (RS) coding scheme is further adopted to significantly reduce the bit error rate (BER). The design of a highly reliable UWOC system was realized based on the above techniques. The system’s performance was evaluated across a range of signal-to-noise ratios (SNRs) and bubble intensities. The results show that the digital AGC module can provide a gain range from −3.2 dB to 16 dB, adapting to varying signal strengths, which greatly bolsters the system’s resilience against underwater turbulence. Filtering techniques and RS coding further enhance the system’s immunity to interference and reduce the system BER. Communication experiments were conducted over various distances under three distinct water quality conditions. The results demonstrate that, within the detection range of the avalanche photodiode (APD), the system consistently maintained a BER below 3.8 × 10−3 across all water types, thereby confirming its high reliability. In clear seawater, the system demonstrated reliable information transmission over a 10 m distance at a data rate of 10 Mbps, achieving a BER of 2 × 10−8. Theoretical calculations indicate that the maximum transmission distance in clear seawater can reach 111.35 m.

13 March 2025 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
ZWZhengguang Wang
Zhengguang Wang
NLNan Liu
Nan Liu
RZRu Zhanqiang
Ru Zhanqiang
PDPeng Ding
Peng Ding
SCSuzhen Cheng
Suzhen Cheng
HSHelun Song
Helun Song
The output of a single-phase lock-in amplifier (LIA) is sensitive to the phase difference between the input and reference signals, which can significantly reduce detection sensitivity. This paper proposes a simple, field-programmable gate array (FPGA)-based, phase self-correcting lock-in amplifier (PSC-LIA) to address this issue. The PSC-LIA employs a phase segment estimation (PSE) function to determine the phase difference and a proportional-integral (PI) controller to generate a corrective phase control signal. A phase-adjustable square wave generator (P-A SWG), offering a phase adjustment range of -π to π, provides the reference signal. To simplify the design of the low-pass filter (LPF), a dedicated low-order high-pass filter (HPF) preprocesses the input signal. Simulations and experimental results validate the effectiveness of the proposed PSC-LIA. Furthermore, its efficacy in extracting error signals is evaluated by integrating it into a laser frequency stabilization system. The results demonstrate that the PSC-LIA exhibits excellent performance, a fast response time, and adaptability to a variety of applications.

9 May 2025 in IEEE Access
Verified
Journal Article
Open access
HHHongYan Han
HongYan Han
ZWZhengGuang Wang
ZhengGuang Wang
PDPeng Ding
Peng Ding
NLNan Liu
Nan Liu
ZLZhenYao Li
ZhenYao Li
HSHelun Song
Helun Song
To address the challenges of incomplete feature representation and insufficient localization accuracy in multimodal fault diagnosis of electrical equipment, this paper proposes a dual-modal feature co-registration algorithm termed Contour Angle Orientation -Speeded Up Robust Features (CAO-SURF). The methodology establishes a three-stage progressive feature enhancement framework through feature space fusion and adaptive registration mechanisms for multimodal sensing data. First, a Modal Perception-Based Canny Edge Detection Strategy (MP-Canny) is developed to resolve feature sparsity in low-contrast infrared images and noise interference in visible-light images. Subsequently, a contour angle orientation (CAO) and a Null-Value Area Compensation Strategy (NVACS)-based gradient field reconstruction model are developed to achieve rotation-invariant feature representation. Finally, an improved SURF descriptor integrated with bidirectional geometric constraint matching significantly enhances feature robustness. Systematic ablation experiments demonstrate the proposed method outperforms state-of-the-art approaches in core metrics including registration accuracy and recall rate. The innovatively developed feature space collaboration mechanism establishes a novel multimodal information fusion paradigm for electrical equipment condition monitoring.