With continuous improvements in the superconducting performance and technical maturity, High Temperature Superconductors (HTS) are believed to meet the challenges of future fusion magnets. The Institute of Plasma Physics Chinese Academy of Sciences (ASIPP) has been designing several types of high current REBCO Conductor On Round Core (CORC) Cable-In-Conduit Conductors (CICCs) for use in Central Solenoid (CS) magnet of a next-generation tokamak device. One preferred structure of CICC consists of six CORC sub-cables embedded in the spiral grooves of a copper structural part. This CICC, rated for 45 kA at 4.2 K and 20 T, is subjected to great electromagnetic forces. Compared with stainless steel, copper has better thermal conductivity but poorer mechanical performance. Therefore, the mechanical robustness of conductor in low temperature and electromagnetic environment needs to be evaluated. In this paper, the mechanical analyses of this conductor is performed by Finite Element Method (FEM), and the effect of pitch on conductor stress is analyzed. These results will provide mechanical information for selecting the relatively suitable conductor scheme.
Multi-phase flow hydrodynamics is an essential theoretical foundation for modernizing engineering and is important in guiding and developing modernizing engineering. In the realm of superconducting power technology, it is imperative to submerge and cool high-field superconducting magnets and superconducting cables, constructed from superconducting materials, in cryogenic fluids in order to maintain a superconducting state. Even minor thermal disturbances can induce boiling of the cryogenic fluid, leading to a two-phase flow regime. In the case of high-field superconducting magnets, the presence of liquid helium as the cooling medium gives rise to a diamagnetic effect. Consequently, the formation of a bubble resulting from boiling is confined in close proximity to the central aperture of the magnet owing to the influence of the magnetic field force. This confinement adversely affects the heat transmission properties of the magnet. This work presents a comprehensive analysis of the flow state during the boiling process of liquid helium, using the finite element approach and the mixture model. The heat transfer in a two-phase flow is analyzed by treating the system as a single pseudo-fluid. The model is consistent with empirical formulations of liquid helium boiling in large vessels and is also suitable for modeling the effect of heating surface orientation on the critical heat flux. Consequently, the analysis of the retention of helium bubbles generated by boiling in a high-field magnet has been further examined, using this particular model. The results of numerical hydrodynamic studies show that the width of the helium bubble stagnation zone is larger compared to the results of hydrostatic calculations. This poses a major challenge for superconducting magnets operating at high magnetic fields and high temperatures. The paper further analyses the effect of supercooled liquid helium on helium bubble stagnation, thus providing valuable insight into the construction of superconducting magnets with high magnetic fields.
10 February 2023 in IEEE Transactions on Applied Superconductivity
State of the art MgB 2 is reviewed as a potential material for the poloidal field (PF) coils of the future fusion reactor due to its high critical temperature and low material cost. The heat treatment process is a crucial step in the development of MgB 2 magnets. The temperature lag in heat treatment of large magnets can lead to insufficient thermal reaction time. It may be infeasible to control the temperature of a magnet according to the heat treatment scheme recommended for the MgB 2 wire. Hence, the heat treatment process of a large magnet needs to be evaluated. Therefore, the dynamic temperature distribution of a MgB 2 PF coil is obtained by simulating the heat transfer in heat treatment process. A suitable heat treatment schedule for a large magnet is proposed and the experimental results of a sub-size Cable-In-Conduit Conductor manufactured with MgB 2 strand confirmed the feasibility of the newly proposed heat treatment process. The results provide a reference for the heat treatment method of a future larger MgB 2 coil.
Institute of Plasma Physics, Chinese Academy of Sciences (ASIPP) has been focusing on high-field all-superconducting user magnet for many years. The 19 T all superconducting magnet for material testing facility consists of a 14 T/ Φ150 mm low temperature superconductor (LTS) background magnet and a 5 T insert coil made by double pancake (DP) coils wound with insulated rare-earth-barium-copper-oxide (REBCO) coated conductor. Currently, it has been found that the inductance of REBCO magnet evolves with current. As an important parameter, the inductance is related to the energy storage and the quench analysis. This study analyzes the equivalent relative permeability μr(H) , which is brought into analyzing the magnetic field distribution to get inductance . Additionally, we developed a tested magnet and a pulsed discharge experimental platform. The results are in consistent with theoretical analysis, which shows a positive correlation between inductance and current.
The Institute of Plasma Physics Chinese Academy of Sciences (ASIPP) is currently engaged in the design of a compact fusion device with a fusion power gain (Q) exceeding one. Due to space limitation for the device, the conductor jacket of the central solenoid (CS) magnet experiences significant electromagnetic stress. Therefore, a higher strength stainless steel known as modified N50 (CHSN01) is utilized for manufacturing the jacket. To effectively heat the plasma, the CS magnet within the device requires operation with alternating current. It is crucial to monitor fatigue crack growth caused by stress cycles in the CS jacket and assess its severity in order to ensure the safety and reliability of the fusion device. In this study, a finite element method is applied to establish a functional relationship between the stress intensity factor range ∆K and the jacket defect depth a precisely based on actual cyclic loads experienced by CS magnet operation. Experimental investigations are conducted to determine fatigue crack growth rates (FCGRs) at 4.2 Kelvin (K) for the CHSN01 jacket. The maximum likelihood estimation method is employed to calculate the probability equations of FCGRs with a random variable description. Consequently, it is possible to determine the maximum allowable initial defect size for a jacket to withstand 60,000 plasma pulses, which will serve as an input parameter for non-destructive testing of jackets.