Traces of potential contact from a perpetrator for evidence are one of the most frequently secured groups of evidence during the examination of the crime scene and during the examination of material in forensic laboratories. By far the most common way to secure the above-mentioned traces is the use of swabs. The literature reports indicate promising results from the use of adhesive materials for securing contact marks. The products currently on the market are not dedicated to forensic genetics or cause problems with the recovery of protected DNA at the stage of DNA isolation in the laboratory. The aim of this study was to determine the effect of conditions from an accelerated aging process carried out under simulated laboratory conditions (with aging factors as follows: UV radiation, temperature, and humidity level) on the physico-mechanical properties and chemical resistance of adhesive films made of polyethylene (PE) and polypropylene (PP). As part of the research, the influence of storage conditions on the physico-mechanical properties and chemical resistance of developed foil materials used to secure forensic traces was developed and verified. The research was carried out in conditions similar to the real ones, conducting tests of accelerated aging with the following factors: temperature, humidity, and UV radiation.

The increasing environmental issue related to textile waste, especially synthetic fibers treated with acrylic resins, demands the creation of sustainable recycling techniques. Biotechnological methods, such as microbial degradation, present a viable solution for the elimination of these coatings and the recovery of important fibers. This study investigates the potential of a biotechnological approach for the removal of acrylic resins from coated woven textile wastes. The biodegradation process of coated woven fabric after the pretreatment at a high temperature (121 °C) or 6% H₂O₂ was performed using the hydrocarbon-degrading bacterial strain Gordonia alkanivorans S7. Over a 72 h biodegradation period, an increase in emulsifying and esterase activities was observed. A reduction mass of the coated textile waste by up to 7 wt% was achieved, and the elimination of acrylic resin was confirmed through FTIR analysis. The findings indicate the usefulness of the biotechnological method in eliminating acrylic resin from textile waste, presenting a viable strategy for polyester fiber recovery and substantially mitigating its environmental impact.

This study aimed to evaluate the impact of sterilization of low-adhesive films with ethylene oxide (EO) or accelerated electrons (radiation sterilization) on their performance in the context of their use to protect forensic traces. It was hypothesized that the implementation of the sterilization process made it possible to obtain functional tools for securing traces. The analysis showed that changes in surface density, density, tensile strength, and adhesion strength do not significantly affect the functional performance of the tapes. Additionally, no alterations in chemical resistance were observed following either sterilization method. The results confirm that both sterilization techniques are suitable for obtaining sterile tapes for forensic applications.