As they are the core components of the drive motor in electric vehicles, the accurate fault diagnosis of rolling bearings is the key to ensuring the safe operation of electric vehicles. At present, intelligent diagnostic methods based on current signals (CSs) are widely used owing to the advantages of the easy collection, low cost, and non-invasiveness of CSs. However, in practical applications, the fault characteristics of the CS are weak, resulting in diagnostic performance that fails to meet the expected standards. In this paper, a diagnosis method is proposed to address this problem and enhance the diagnosis accuracy. Firstly, CSs from two phases are processed by periodic resampling to enhance data features, which are then fused through splicing operations. Subsequently, a feature enhancement module is constructed using multi-scale feature fusion for decomposing the input. Finally, a diagnosis model is constructed by using an improved channel attention module (CAM) for enhancing the diagnosis performance. The results from experiments containing two different types of bearing datasets show that the proposed method can extract high-quality fault features and improve the diagnosis accuracy, presenting great potential in intelligent fault diagnosis and the maintenance of electric vehicles.
Since permanent magnets and rotors are core components of electric vehicle drive motors, accurate diagnosis of demagnetization and eccentricity faults is crucial for ensuring the safe operation of electric vehicles. Currently, intelligent diagnostic methods based on three-phase current signals have been widely adopted due to their advantages of easy acquisition, low cost, and non-invasiveness. However, in practical applications, the fault characteristics in current signals are relatively weak, leading to diagnostic performance that falls short of expected standards. To address this issue and improve diagnostic accuracy, this paper proposes a novel diagnostic method. First, branch current is utilized as the data source for diagnosis to enhance the fault characteristics of the diagnostic signal. Next, a dual-modal feature extraction module is constructed, employing Variational Mode Decomposition (VMD) and Fast Fourier Transform (FFT) to concatenate the input branch current along the feature dimension in both the time and frequency domains, achieving nonlinear coupling of time–frequency features. Finally, to further improve diagnostic accuracy, a cascaded convolutional neural network based on dilated convolutional layers and multi-scale convolutional layers is designed as the diagnostic model. Experimental results show that the method proposed in this paper achieves a diagnostic accuracy of 98.6%, with a misjudgment rate of only about 2% and no overlapping feature results. Compared with existing methods, the method proposed in this paper can extract higher-quality fault features, has better diagnostic accuracy, a lower misjudgment rate, and more excellent feature separation ability, demonstrating great potential in intelligent fault diagnosis and maintenance of electric vehicles.