Perovskite solar cells (PSCs) have been intensively investigated over the last several years. Unprecedented progress has been made in improving their power conversion efficiency; however, the stability of perovskite materials and devices remains a major obstacle for the future commercialization of PSCs. In this review, recent progress in PSCs is summarized in terms of the hybridization of compositions and device architectures for PSCs, with special attention paid to device stability. A brief history of the development of PSCs is given, and their chemical structures, optoelectronic properties, and the different types of device architectures are discussed. Then, perovskite composition engineering is reviewed in detail, with particular emphasis on the cationic components and their impact on film morphology, the optoelectronic properties, device performance, and stability. In addition, the impact of two-dimensional and/or one-dimensional and nanostructured perovskites on structural and device stability is surveyed. Finally, a future outlook is proposed for potential resolutions to overcome the current issues.

Although a compact holes-transport-layer (HTL) film has always been deemed mandatory for perovskite solar cells (PSCs), the impact their compactness on the device performance has rarely been studied in detail. In this work, based on a device structure of FTO/CIGS/perovskite/PCBM/ZrAcac/Ag, that effect was systematically investigated with respect to device performance along with photo-physics characterization tools. Depending on spin-coating speed, the grain size and coverage ratio of those CIGS films on FTO substrates can be tuned, and this can result in different hole transfer efficiencies at the anode interface. At a speed of 4000 r.p.m., the band level offset between the perovskite and CIGS modified FTO was reduced to a minimum of 0.02 eV, leading to the best device performance, with conversion efficiency of 15.16% and open-circuit voltage of 1.04 V, along with the suppression of hysteresis. We believe that the balance of grain size and coverage ratio of CIGS interlayers can be tuned to an optimal point in the competition between carrier transport and recombination at the interface based on the proposed mechanism. This paper definitely deepens our understanding of the hole transfer mechanism at the interface of PSC devices, and facilitates future design of high-performance devices.