A hybrid acoustic cloaking, composed of binary splitting metasurfaces (BSMs) and near-zero-index metamaterials (NZIMs), is proposed in this paper. The BSMs form acoustic cloaking to make the incident waves diffract around the obstacle, while NZIMs can straightly transfer the incident waves to the input layer of BSMs and control the emergent waves from the output layer of BSMs to propagate along the original incident direction. Due to the tunneling effect, NZIMs compensate for the extra phase from the wave diffraction and improve the efficiency of the acoustic cloaking. As BSMs and NZIMs consist of Helmholtz cavities and cylinders, respectively, the hybrid acoustic cloaking is simple in structure and easy to fabricate with only two-unit cell types per period. Additionally, an optimization method is applied to combine all layers of hybrid acoustic cloaking and realize a better cloaking effect. Using such a way, the normalized efficiency of transmitted waves through the hybrid acoustic cloaking can reach up to 97.2%, and scattered waves are strongly suppressed. For experimental demonstration, the actual sound field of emergent waves of acoustic cloaking is visualized with schlieren photography, where the cloaking effect is physically validated. This study simplifies the design of acoustic cloaking and provides further expansibility for wavefront transformations.
Guided wave-based nondestructive testing and structural health monitoring methods have been developed to exhibit attractive potentials and best prospects for rapid and sensitive detection of defects or damage in engineering structures. Different modes of guided waves can provide different sensitivities of damage detection. However, the multimode and mode conversion nature of guided waves poses significant challenges to mode purification of received signals. This study aims to design a metamaterial-based smart transducer for mode purification of Lamb waves in a plate, which can filter out an undesired mode of the Lamb wave to enhance sensing and actuating signals of a dominated mode. The smart transducer consists of a periodic array of shunted piezoelectric unimorphs with staggered polarization directions and is bonded on the surface of a host plate. Numerical and experimental results show that a local resonance bandgap for an anti-symmetric Lamb wave, rather than a symmetric Lamb wave, can be obtained and tuned through the shunting inductance circuit. Within such mode bandgap, the wave control for propagating a specific mode of the Lamb wave can be further realized, i.e., the mode of the Lamb wave is purified. The design presented herein offers enhanced capabilities in controlling guided wave propagation for engineering applications and nondestructive testing techniques.
9 December 2024 in IEEE Transactions on Vehicular Technology
The steer-by-wire (SBW) system is susceptible to parameter perturbations due to external disturbances under complex and variable conditions, leading to unstable performance. To address this challenge, this paper proposes a multi-model adaptive Kalman filter (MMAKF), which can efficiently attenuate the impact of the cornering stiffness variation and significantly enhances the precision of the front wheel angles estimation. On this basis, a fault diagnosis and fault-tolerant control (FDFTC) strategy is also proposed to mitigate the impact of faults. Joint simulations using Carsim and MATLAB/Simulink demonstrate the effectiveness of the proposed FDFTC strategy in detecting and reconstructing various sensor signal faults. Furthermore, the simulations conducted with varying road adhesion coefficients and vehicle speeds prove that the proposed MMAKF offers remarkable robustness and accurate estimation of front wheel angles under challenging conditions. Compared to the traditional Kalman filter (KF), it reduces maximum error by 22.17% and maximum root mean square error (RMSE) by 44.69%. Meanwhile, the validity of the proposed MMAKF algorithm and FDFTC strategy is demonstrated by the HIL platform. These results indicate promising prospects for the proposed MMAKF and FDFTC strategy in SBW fault-tolerant control applications and self-driving technology development.
This study proposes a membrane-type metamaterial with digitally controlled piezoelectric actuation for low-frequency sound absorption applications. The hybrid structure integrates an aluminum membrane functionally bonded with programmable piezoelectric patches (PZTs) and a sealed air cavity. Two innovative control strategies—Resistance Enhancement and Resonance Enhancement—dynamically adjust circuit impedance to maximize electromechanical energy conversion efficiency, thereby optimizing absorption at targeted frequencies. These strategies are implemented via a real-time digital feedback system. A coupled piezoelectric-structural-acoustic model is established to characterize the system’s transfer function, with validation through both finite element simulations and impedance tube experiments. Numerical and experimental results demonstrate nearly complete absorption around the resonant frequency, and the bandwidth can be further broadened through multi-resonance superposition. Theoretical analysis confirms that the active control strategies simultaneously modulate the acoustic impedance components (resistance and reactance), thereby optimizing electromechanical energy conversion efficiency. This work establishes a novel active-control methodology for low-frequency and high-efficiency noise mitigation.
Balancing ventilation and broadband sound insulation remains a significant challenge in noise control engineering, particularly when simultaneous airflow and broadband noise reduction are required. Conventional porous absorbers and membrane-type metamaterials remain fundamentally constrained by ventilation-blocking configurations or narrow operational bandwidths. This study presents a ventilated composite metamaterial unit (VCMU) co-integrating optimized labyrinth channels and the Helmholtz resonators within a single-plane architecture. This design achieves exceptional ventilation efficiency through a central flow channel while maintaining sub-λ/30 thickness (λ/31 at 860 Hz). Coupled transfer matrix modeling and finite-element simulations reveal that Fano–Helmholtz resonance mechanisms synergistically generate broadband transmission loss (STL) spanning 860–1634 Hz, with six STL peaks in the 860 and 1634 Hz bands (mean 18.4 dB). Experimental validation via impedance tube testing confirmed excellent agreement with theoretical and simulation results. The geometric scalability allows customizable acoustic bandgaps through parametric control. This work provides a promising solution for integrated ventilation and noise reduction, with potential applications in building ventilation systems, industrial pipelines, and other noise-sensitive environments.