Instead of analog electronic circuits and components, digital controllers that are capable of active multi-resonant piezoelectric shunting are applied to elastic metamaterials integrated with piezoelectric patches. Thanks to recently introduced digital control techniques, shunting strategies are possible now with transfer functions that can hardly be realized with analog circuits. As an example, the ‘pole-zero’ method is developed to design single- or multi-resonant bandgaps by adjusting poles and zeros in the transfer function of piezoelectric shunting directly. Large simultaneous attenuations in up to three frequency bands at deep subwavelength scale (with normalized frequency as low as 0.077) are achieved. The underlying physical mechanism is attributable to the negative group velocity of the flexural wave within bandgaps. As digital controllers can be readily adapted via wireless broadcasting, the bandgaps can be tuned easily unlike the electric components in analog shunting circuits, which must be tuned one by one manually. The theoretical results are verified experimentally with the measured vibration transmission properties, where large insulations of up to 20 dB in low-frequency ranges are observed.
18 November 2015 in Smart Materials and Structures
Periodic arrays of piezoelectric patches shunted by amplifier–resonator circuits are attached to a beam in order to gain large low-frequency attenuations in the propagation of flexural beam vibration. A numerical model based on the transfer matrix methodology and Bloch theory are built to predict the band gaps and attenuation factors as well as the transmission of vibration in the proposed smart metamaterials. Influences of circuital parameters on attenuation factors and the equivalent Young’s modulus are studied. It is found that the central frequency of attenuations is lower than the resonant frequency because of the negative equivalent elastic modulus of piezoelectric patches at frequencies lower than the resonance. Finite element simulations and vibration experiments are conducted on a 10 mm-thick aluminium alloy beam with six pairs of piezoelectric patches glued on it. Based on theoretical calculations, three sets of circuital parameters are chosen to gain large vibration transmission attenuations around the lowest three modal peaks. Significant attenuation is found in the experimental results, which is predicted in theoretical calculations and finite element simulations. A superlattice metamaterial specimen with a combination of three different sets of circuital parameters is also studied in order to gain wide attenuation frequency ranges.
14 September 2018 in Smart Materials and Structures
Acoustic metamaterials, capable of both sound insulation and energy harvesting, composed of Helmholtz resonators and built-in decorated membranes are proposed. It is theoretically and experimentally proved that the proposed metamaterial can obtain two sound insulation bands where the sound energy is also efficiently harvested at the same frequency simultaneously. The peak of the output power can reach up to 244 nW when the incident sound pressure is 1 Pa, which is about 14 times larger than structures composed of single membrane reported before with the same input. Moreover, considerable energy harvesting with average output power of about 20 nW can be achieved within wider frequency ranges (with bandwidth up to 90 Hz) by choosing proper parameters. Additionally, the hybrid resonance mechanism of the proposed metamaterials is explained well with an equivalent theoretical model. These novel properties of the proposed metamaterial can be applied in many potential applications in noise control and energy harvesting.
A hybrid acoustic cloaking, composed of binary splitting metasurfaces (BSMs) and near-zero-index metamaterials (NZIMs), is proposed in this paper. The BSMs form acoustic cloaking to make the incident waves diffract around the obstacle, while NZIMs can straightly transfer the incident waves to the input layer of BSMs and control the emergent waves from the output layer of BSMs to propagate along the original incident direction. Due to the tunneling effect, NZIMs compensate for the extra phase from the wave diffraction and improve the efficiency of the acoustic cloaking. As BSMs and NZIMs consist of Helmholtz cavities and cylinders, respectively, the hybrid acoustic cloaking is simple in structure and easy to fabricate with only two-unit cell types per period. Additionally, an optimization method is applied to combine all layers of hybrid acoustic cloaking and realize a better cloaking effect. Using such a way, the normalized efficiency of transmitted waves through the hybrid acoustic cloaking can reach up to 97.2%, and scattered waves are strongly suppressed. For experimental demonstration, the actual sound field of emergent waves of acoustic cloaking is visualized with schlieren photography, where the cloaking effect is physically validated. This study simplifies the design of acoustic cloaking and provides further expansibility for wavefront transformations.
1 December 2018 in The Journal of the Acoustical Society of America
Metamaterial provides a promising way to control low-frequency noise, but its narrow bandgap limits its applications. To end this, a membrane-type smart metamaterial with multi-modal sound insulation property is studied. The proposed metamaterial consists of an aluminum membrane bonded with multi-modal resonant piezoelectric resonators. Both simulated and experimental results show that the proposed metamaterial can broaden the locally resonant bandgaps because of the effect of the multi-modal resonance (the percent bandwidths are 0.19 and 0.22 for the lowest mode and higher two modes, respectively). Large multi-modal sound insulations (over 37 dB) are obtained around the designed resonant frequencies in low frequency regime (<2000 Hz) with an ultra-thin thickness (over 1000 times thinner than the acoustic wavelength). It is also demonstrated that the excellent sound insulation property can be tuned by simply adjusting the external circuits instead of modifying the structure itself. The underlying mechanism of the unusual sound insulation of the proposed metamaterial is attributed to the negative effective bending stiffness Deq derived by the effective medium method. In addition, the parametric study shows that the circuital parameters (capacitances) are inversely related to the sound transmission loss of the proposed multi-resonant metamaterial, which benefits the optimization of insulation effect.
Embedded wireless sensing networks (WSNs) provide effective solutions for structural health monitoring (SHM), where how to provide long‐term electric power is a bottle‐neck problem. Piezoelectric vibration energy harvesting (PVEH) has been widely studied to realize self‐powered WSNs due to piezoelectric effect. Structural vibrations are usually variable and exist in the form of elastic waves, so cantilever‐like harvesters are not appropriate. In this paper, one kind of two‐dimensional (2D) piezoelectric metamaterial plates with local resonators (PMP‐LR) is investigated for structural vibration energy harvesting. In order to achieve low‐frequency and broadband PVEH in SHM, it is highly necessary to study dynamic characteristics of PMP‐LR, particularly bandgaps. Firstly, an analytical model is developed based on the Kirchhoff plate theory, and modal analysis is done by using the Rayleigh–Ritz method. Then, effects of geometric and material parameters on vibration bandgaps are analyzed by finite element‐based simulations. In the end, experiments are carried out to validate the simulated results. The results demonstrate that the location of bandgaps can be easily adjusted by the design of local resonators. Therefore, the proposed method will provide an effective tool for optimizing local resonators in PMP‐LR.